Loren Data's SAM Daily™

FBO DAILY ISSUE OF DECEMBER 05, 2001 FBO #0003
PRESOLICITATION NOTICE

51 -- Machine tools, various

Notice Date

12/3/2001
 

Notice Type

Presolicitation Notice
 

Contracting Office

Contract Division, Code 530, Porstmouth Naval Shipyard, Portsmouth, NH 03801-2590
 

ZIP Code

03801-2590
 

Solicitation Number

N00102-02-Q-0829
 

Response Due

12/20/2001
 

Archive Date

1/19/2002
 

Point of Contact

Kathleen M. Barry (207)438-3866
 

E-Mail Address

Email your questions to Click here to contact Contract Specialist
(barrykm@mail.ports.navy.mil)
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This announcement is issued as N00102-02-Q-0829 and incorporates clauses effective through Federal Acquisition Circular 01-01. This acquisition is reserved for Small Business. The North American Industrial Classification System (NAICS) code is 333512 and the small business size standard is 500 employees. Item 0001, The kit of tools consists of below (these are brand name or equal: 1. 3112; 52pc. Clamping Set 1/2x13 (5/8 slot size),3set 2. 3112; Palmgren Universal 3 Position Heavy Duty Vise 4in.,3ea 3. 3112; Falcon R8 Toolholder TIHL-R8-4,3ea 4 . 3112; Falcon #3J taper adptr TIJDA-4-3,1ea 5. 3112; Falcon #33J taper adptr TIJDA-4-33, 1ea 6. 3112; Albreght Precision Keyless Drill Chucks, 1/32-1/2 #33J taper, 2ea 7. 3112; Albreght Precision Keyless Drill Chucks, 0-5/16 #33J taper, 2ea 8. 3112; Jacobs Drill Chuck Adptr. R8x33J, 4ea 9. 3112; R8 Collet Set 1/8-7/8(32nds), 2set 10. 3112; Rack for R8 Collet Set, 2ea 11. 3112; R8 to #2 Morse Taper Adapter, 4ea 12. 3112; R8 to #3 Morse Taper Adapter, 4ea 13. 3112; R8 End Mill Holder Set 3/16 - 1-1/4,2set 14. 3128; Jacobs Drill Chuck #14N-3JT 0-1/2, 2ea 15. 3112; Jacobs Drill Chuck #14N-3JT 0-1/2, 1ea 16. 3112; Jacobs Drill Chuck #34-33JT 0-1/2,1 ea 17. 3112; R8 Shell Mill Holder Set ? - 1-1/2, 2set 18. 3127; Aloris Tool Holder CA-1S,15ea 19. 3127; Aloris Tool Holder CA-2S,15ea 20. 3127; Aloris Tool Holder BXA-1S, 10ea 21. 3127; Aloris Tool H older BXA-2S,10ea 22. 3126; Wolhaupter Clamping Sleeves 7/8x5/16, 072-108,5ea 23. 3126; Wolhaupter Clamping Sleeves 7/8x3/4, 12ea 24. 3112; Wolhaupter Clamping Sleeves 3/4x5/16, 071-103,3ea 25. 3112; Wolhaupter Clamping Sleeves 3/4x3/8, 071-104, 3 ea 26. 3112; Wolhaupter Clamping Sleeves 3/4x1/2,071-105, 3 ea 27. 3112; Wolhaupter Clamping Sleeves 3/4x5/8, 3ea 28. 3128; 50V-flange Jacobs Adptr V50-J3,2ea 29. 3160/3127; Hand Knurl Set(3knurls 1/2x1/4x3/16) Hardened Frame Coarse/Medium/Fine - Straight/Diamond Knurls, 2set 30. 3127; HEX KEY BUCK ADJUST-TRU 3/8 #71420, 5ea 31. SHOP 31; HOUGEN ROTABROACH 1-9/16 #42050, 2ea 32. SHOP 31; HOUGEN ROTABROACH 2 #42064,2ea 33. 3127; LATHE CHUCK WRENCH 1/2SQ X 11IN LONG, 3 ea 34. 3127; LATHE CHUCK WRENCH 9/16SQ X 11-7/16IN LONG, 3ea 35. 3127; LATHE CHUCK WRENCH 5/8SQ X 10-1/4IN LONG, 2ea 36. 3127; LATHE BUCK CH UCK WRENCH 5/16SQ X 1/4HX #71361,3ea The following clauses/provisions from the Federal Acquisition Regulation(FAR) and Defense Federal Acquisition Regulation (DFAR) apply: 52.212-1(October 200), Instructions to Offerors - Commercial items; 52.212-2(January 1999), Evaluation - Commercial items (items will be evaluated by the lowest price technically acceptable offer who meets all the requirements and is otherwise eligible for award); 52.212-3(October 2000), Offeror Representations and Certifications - Commercial items (note: anyone responding to this notice must provide these representations and certifications, as well as tin#, complete address and phone number, e-mail address if available, cage code and duns#. In addition, contractors must be Centrally Contract Registered to receive an award.); 52.212-4(May 2001), contract terms and conditions - commercial items; 52.212 -5(May 2001), Contract terms and conditions required to implement statutes or executive orders - commercial items; 252.212-7001(Dec 2000), Contract terms and conditions required to impleent statues or executive order applicable to defense acquisitions of commercial items. Brand Name or Equal clause 52.211-6 (Aug 1999) applies. Offerors quoting other than brand name specified must provide literature. All of the above clauses can be viewed in full text at http://www.arnet.gov. Any inquiries to this solicitation can be made to the below listed. This acquisition is reserved for a 100% small business set aside (see note 1).
 

Web Link

click here for combined solicitation/synopsis
(http://www.neco.navy.mil)
 

Record

SN20011203/00000298-011207172700 (fbodaily.com)
 

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |