SPECIAL NOTICE
C -- ARCHITECT AND ENGINEERING ENVIRONMENTAL SERVICES
- Notice Date
- 2/22/2002
- Notice Type
- Special Notice
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, OC-ALC - (Base Contracting), OC-ALC/PKO 7858 5th Street Ste 1, Tinker AFB, OK, 73145-9106
- ZIP Code
- 73145-9106
- Solicitation Number
- Reference-Number-F5EMXI20350300
- Response Due
- 3/25/2002
- Archive Date
- 6/30/2002
- Point of Contact
- Monte Pope, Contracting Officer, Phone (405) 739-7664, Fax (405) 739-7421,
- E-Mail Address
-
monte.pope@tinker.af.mil
- Small Business Set-Aside
- Partial Small Business
- Description
- Title: Architect & Engineering Environmental Services Program 1. Architect-Engineer (A-E) services (Title 1, 2, and Other) of four A-E firms are required to provide a wide variety of multi-discipline services for Tinker Air Base. Contract work may include, but is not limited, to the following project types: a. Complete detailed designs, specification, and work plans as required for the remediation of environmental sites, with an objective of retaining A-E firms that develop and implement standard Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and Resource Conservation and Recovery ACT (RCRA) investigations for contaminated sites. Standard CERCLA investigations shall be conducted as described in the National Oil and Hazardous Substance Pollution Contingency Plan (NCP), 40 CFR 300, and include Preliminary Assessment (PA), Site Investigations (SI), Remedial Investigations (RI), Risk Assessments, and Feasibility Studies (FS). Other studies and investigations shall follow RCRA (e.g. RCRA Facility Investigations and Corrective Measures Studies) or other applicable environmental guidelines and standards. Complete Remedial Designs (RD), shall be developed, including plans and specifications, construction schedules, cost estimates, Operation and Maintenance (O & M) plans, health and safety requirements, and technical support including construction oversight. Typical sites include landfills, fuel and other spills, fire training areas, and burial sites. b. Pollution prevention requirements, to include process modeling and analysis, pollution prevention opportunity assessments, design, prototype fabrication and installation, testing, technical insertion, depot manufacturing processes, technical documentation, environmental studies, and information systems. Pollution prevention activities may require complete engineering designs and evaluations and include prototype and/or off-the-shelf equipment to complete the requirement. c. Environmental Impact Analysis Process (EIAP) requirements, including complete Environmental Baseline Surveys (EBSs), Environmental Assessments (EAs) and Environmental Impact Statements (EISs) in accordance with the National Environmental Policy Act (NEPA) of 1969, as amended, 40 CFR 1500-1508, 32 CFR 989, AFI 32-7061, and AFI 32-7066. d. Environmental Compliance requirements, including a wide array of project types to ensure compliance with Federal, State, and Local environmental regulations. These may include treatability studies to determine the impact of new chemical usage on the Industrial Wastewater Treatment Plant (IWTP), hazardous waste management studies for RCRA compliance, air emission source surveys and other requirements to comply with the Tinker AFB Title V permit under the Clean Air Act (as Amended in 1990). Additional work may require completing other air quality requirements, developing or updating various plans, fulfilling design requirements for Underground Storage Tank (UST) removal or installation, and developing the yearly Toxic Release Inventory (TRI) report. e. Natural and Cultural Resources requirements, to include studies of rare, threatened, or endangered flora and fauna, delineation and electronic mapping of wetlands, floodplains, water sheds, and other resources, development of natural/cultural resources-related geographic information systems, design of natural resources projects such as erosion control systems, stormwater pollution prevention control systems, and floodwater detention/retention basins, development and submittal of reports to the State Historic Preservation Office (SHPO) and natural resource agencies (e.g. U.S. Fish and Wildlife Service and U.S. Army Corps of Engineers), and assessments and determination of historic significance for structures located on TAFB. 2. The design of engineering, mechanical, electrical, environmental, and architectural features of the work shall be accomplished or reviewed and approved by Architects or Engineers registered to practice in the particular professional field involved, in a state or possession of the United States, Puerto Rico, or the District of Columbia. 3. All data/information and drawings as well as any other deliverables identified by the government to be generated under this contract shall be submitted in a format compatible with the computers used by the Environmental Management (EM) Directorate. The A-E contractors are required to submit Remedial (RD) data/information to EM according to the Installation Restoration Program Information Management System (IRPIMS) Contractor loading Tool User?s Manual so the data/information can loaded in to the EM computer system. ArcView software is to be used for the drawings in addition to CE?s Intergraph design drawing requirements. 4. The selection of A-E firms will be based upon the following criteria: a. Professional qualifications of staff in environmental and related engineering disciplines, chemistry, biological sciences, toxicology, geophysics, geology/hydrogeology, quality assurance, health and safety, and other related disciplines. b. Specialized experience demonstrating technical competence in projects similar in scope to project described in Paragraph 1 above. c. Professional capacity and ability to accomplish projects within the required time frames, including range of available resources (e.g. computer design). d. Past performance of the firm with respect to execution of projects for DoD, other Government agencies, and private firms. Note: DD Form 2631 will be used in making this evaluation. e. Preference shall be given to firms with an office located in the greater metropolitan area of Oklahoma City, Ok. 5. The four awards will be Indefinite Delivery/Indefinite Quantity (IDIQ) type contracts, with a $10 million limit for individual task orders and a $25 million per contract maximum limit for the basic year or any option period. The term for each contract will consist of one 12-month basic period with four one-year options. The total cumulative of all contracts shall not exceed $60 million over a five-year period. 6. There shall be an award set aside to a Small Business (SB) firm provided a response from the SF 254s and SF 255s indicate sufficient numbers of these firms are available. The North American Industry Classification System (NAICS) for this acquisition is 541310 and the size standard for a concern, including its affiliates, will not exceed $4.0 million and will apply to that portion which may be set aside. 7. Firms desiring consideration should submit SF 254s and SF 255s to OC-ALC/PKOE Attn: Monte Pope, 7858 5th Street, Suite 1, Tinker AFB, OK 73145, to be received no later than 3:00 PM local time, 25 March 2002. All 8A certified, SDBs and SB firms are instructed to so note their status on the SF 254 and SF255. On the SF 255, Item 8, offerors may include a maximum of fifty (50) projects in lieu of the form specified number of ten (10). SF 255, Item 9, shall be limited to a maximum of ten (10) pages. Responses from all firms will be considered. Responding firms shall clearly indicate any subcontractors and/or consultants. Any proposed teaming arrangements shall clearly state the type of teaming arrangement; Joint Venture or Prime/Subcontractor. No other notification concerning this requirement will be provided. This is not a request for proposal. Specifications, plans, and bidders list are not available. NOTE: A solicitation will not be issued against this synopsis. ANY MENTION OF THE AVAILABILITY OF THE SOLICITATION IS SYSTEM GENERATED AND SHOULD BE DISREGARDED!
- Place of Performance
- Address: TINKER AFB OK
- Zip Code: 73145
- Country: USA
- Zip Code: 73145
- Record
- SN00029787-W 20020224/020222213253 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |