SOLICITATION NOTICE
51 -- Tools
- Notice Date
- 3/11/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Mobility Command, 43rd CONS, 1443 Reilly Rd Suite C, Pope AFB, NC, 28308-2896
- ZIP Code
- 28308-2896
- Solicitation Number
- F23MS4204301
- Response Due
- 3/18/2002
- Archive Date
- 4/2/2002
- Point of Contact
- Mona Spencer, Contract Specialist, Phone (910) 394-5947, Fax (910) 394-6279, - Gail Williams, Contract Specialist, Phone (910) 394-6250, Fax (910) 394-6279,
- E-Mail Address
-
SpencerM1@pope.af.mil, gail.williams@pope.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This announcement is for the purchase of various tools and constitutes the only solicitation. Solicitation number is F23MS4204301. Quotes are being requested and a written solicitation will not be issued. The acquisition is a 100% small business set-aside and the applicable NAICS code is 332212. The requirement is to purchase the following tools: Line Item 001) 1/4? Carbide Burr, Cylindrical, PN: 141, MFR: Drillco Cutting Tools, Quantity: 30 each; Line Item 002) 1/2" Carbide Burr, Cylindrical, PN: 155, MFR: Drillco Cutting Tools, Quantity: 30 Each; Line Item 003) 3/4" Carbide Burr, Cylindrical, PN: 162, MFR: Drillco Cutting Tools, Quantity: 12 Each; Line Item 004) 3/8? Carbide Burr, Cone, PN: 334, MFR: Drillco Cutting Tools, Quantity: 30 Each; Line Item 005) 1/2" Carbide Burr, Cone, PN: 338, MFR: Drillco Cutting Tools, Quantity: 30 Each; Line Item 006) 1/4" Carbide Burr, Ball, PN: 200, MFR: Drillco Cutting Tools, Quantity: 30 Each; Line Item 007) 3/8? Carbide Burr, Ball, PN: 204, MFR: Drillco Cutting Tools, Quantity: 30 Each; Line Item 008) 1/2" Carbide Burr, Ball, PN: 208, MFR: Drillco Cutting Tools, Quantity: 30 Each; Line Item 009) 1/2" Inverted Cone, Flat End 1/2", PN: 346, MFR: Drillco Cutting Tools, Quantity: 30 Each; Line Item 0010) #40 Terry Drill Bit, PN: 6540, MFR: HP-Wetmore, Quantity: 1,000 Each; Line Item 0011) #30 Drill Bit, PN: 6530, MFR: HP-Wetmore, Quantity: 1,000 Each; Line Item 0012) #40 Drill Bit, PN: 2140, MFR: Drillco Cutting Tools, Quantity: 1,008 Each; Line Item 0013) #30 Drill Bit, PN: 2130, MFR: Drillco Cutting Tools, Quantity: 1,008 Each; Line Item 0014) #27 Drill Bit, PN: 2127, MFR: Drillco Cutting Tools, Quantity: 1,008 Each; Line Item 0015) #21 Drill Bit, PN: 2121, MFR: Drillco Cutting Tools, Quantity: 1,008 Each; Line Item 0016) #16 Drill Bit, PN: 2116, MFR: Drillco Cutting Tools, Quantity: 1,008 Each; Line Item 0017) #10 Drill Bit, PN: 2110, MFR: Drillco Cutting Tools, Quantity: 1,008 Each; Line Item 0018) #5 Drill Bit, PN: 2105, MFR: Drillco Cutting Tools, Quantity: 1,008 Each; Line Item 0019) 1/4" Drill Bit, PN: 2012, MFR: Drillco Cutting Tools, Quantity: 1,008 Each. Contractors must be registered in Central Contractor Registration, www.CCR2000.com. All quotes are due not later than close of business, 4:00 PM eastern standard time on 18 Mar 2002. Quotes can be faxed to (910) 394-6279. Contractors are responsible for verifying receipt of faxed quotes. Quotes may be e-mailed to SSgt Mona Spencer at SpencerM1@pope.af.mil or mailed to 43 CONS/LGCA, 1443 Reilly Road, Suite C, Pope AFB NC 28308-2896. If you should have any questions contact SSgt Mona Spencer at (910) 394-5688.
- Place of Performance
- Address: Pope AFB NC
- Zip Code: 28308
- Country: USA
- Zip Code: 28308
- Record
- SN00039123-W 20020313/020311213334 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |