SOLICITATION NOTICE
30 -- Unfired Pressure Vessels, 10 CU. FT capacity with vessel support racks and interior epoxy painting with options for additional units.
- Notice Date
- 2/22/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NUWC Division Newport, Simonpietri Drive, Newport, RI, 02841-1708
- ZIP Code
- 02841-1708
- Solicitation Number
- N66604-02-Q-5245
- Response Due
- 3/19/2002
- Point of Contact
- Raymond Smith, Contract Negotiator, Phone 401-832-5939, Fax 401-832-4820, - Emanuel Cannata, Branch Head, Phone 401-832-1441, Fax 401-832-4820,
- E-Mail Address
-
smithrd@npt.nuwc.navy.mil, cannataem@npt.nuwc.navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- The Naval Undersea Warfare Center intends to issue a solicitation on a competitive basis for the acquisition for two (2) different Unfired Pressure Vessels (one each) with options for an additional one(1), two 92), or three (3) units of each Vessel if the options are exercised. (The only difference between the two vessels will be the dimensions for the top end plug.) On overview of the construction specifications is as follows: ASME BPVC SEC VIII D1, constructed and stamped, seamless, forged, 5,000 design working pressure, minimum safety factor of 4, corrosion allowance of 1/16 inch. Dimensions of the vessel(s) shall be approximately 16 inches in diameter by 12 feet long . The vessel shall be cylindrical in shape with two hemisphere ends. Capacity of 10 cubic foot per vessel, water volume (74.75 gallons); 2,746 scf per vessel of dry compressed air at 4,500 psig. Temperature rating of -20F to 200F. Vessel(s) shall have threaded connection on both ends. Plug drawing and specifications to be included with RFQ. ssel(s) shall come with design drawings and engineering design data stamped by a registered professional engineer. Design data shall include calculations for wall thickness, principle stresses, stress concentrations, corrosion allowance, burst strength, and factor of safety. ASME section 8 Div.1 documentation is to be provided with each vessel. Testing and inspection(after heat treatment) specifics will be in RFQ. Vessel(s) shall be shipped capped and charged with nitrogen. Each vessel shall be provided with a cap rated for 6,000 psi working pressure. Provide support racks for installation in a vertical position. Shop drawings of the vessel(s) and support racks shall be submitted for approval prior to fabrication. The Government intends to award a single contract on a Firm fixed Price Contract basis using Simplified Acquisition Procedures. A request for Quote will be released on or before 1 March 02. Delivery is required to be F.O.B. Destination at Naval Undersea Warfare Center Division Newport, Newport, RI within 90 Days after contract award. The North American Industry Classification System Code is 332999 ? 500 employees. Our department no longer issues solicitations or amendments in paper form. Instead, they may be accessed at our web site http://www.npt.nuwc.navy.mil/contract/. We also provide electronic access in our Bid Room.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USN/NAVSEA/N66604/N66604-02-Q-5245/listing.html)
- Record
- SN00059272-F 20020414/020412214449 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |