SOLICITATION NOTICE
71 -- FOOTLOCKERS FOR RECRUIT BARRACKS (TRUNK, LOCKER)
- Notice Date
- 4/24/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- M00681 PO Box 1609 Oceanside, CA
- ZIP Code
- 00000
- Solicitation Number
- M0068102T9801
- Response Due
- 5/1/2002
- Archive Date
- 5/31/2002
- Point of Contact
- WAYLON MCKNIGHT 760 725 3237 SGT J. WAYLON McKNIGHT CONTRACTING SPECIALIST REGIONAL CONTRACTING OFFICE - SOUTHWEST 760-725-3237 VOICE 760-725-8445/4346 FAX MCKNIGHTJW@PENDLETON.USMC.MIL
- E-Mail Address
-
Email your questions to CLICK HERE TO CONTACT CONTRACTING SPECIALIST
(mcknightjw@pendleton.usmc.mil)
- Description
- This is a combined synopsis/solicitation for Commercial Items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation No. M0068102T9801 is issued as a Request For Proposals (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-23 and DAC 97-13. This procurement is 100% Small Business Set-Aside. The North American Industry Classification System code is 337215- 500 employees. The item is as follows: ITEM 0001 QTY 696 each, Footlockers, plywood for sides, bottom and top shall be ?? thick, BC grade plywood. Steel used for corners, edging, channel, and interior tray shall be free from corro sion, scale or other imperfections that may be obvious in final appearance or that may adversely affect durability, functionality or structural quality. Gauges shall be as follows: Inside Tray 24 Gauge, Corners, edging, etc?20 Gauge, Interior shelf/handle support 16 Gauge, Piano hinge 18 Gauge. Miscellaneous hardware, including handles, lock hasp, screws, and bolts shall be chromium or zinc plated for corrosion resistance. Handles shall be 3/8? steel ?drop-type? handles, bolted through each end panel with ?? x ?? bolts. Units are to be 32? wide, 18? deep, and 13? high; constructed of plywood components joined by full length steel angles at all corners and edges. The top shall be surrounded on two sides and front by a continuous channel to protect the edges, and installed to the back with a full length piano hinge, formed to protect the top of the back panel and the back of the top panel. Units shall be stable, without torque, deflection, warp or twist. Exposed corners shall be smooth, without protrusions or sharp edges. Holes for securing components shall be accurately punched with burrs removed. Corner angles shall be attached to panels with #8 Phillips head screws. Handles shall be attached to the end panels with through- bolts. Bolts shall be supported on inside with a reinforcing angle of 18 gauge steel. Interior tray shall be formed of one continuous piece of steel. The front and back edges shall be flanged out at both sides for spot welding to the ends. Tray shall be supported on each end panel by a continuous angle and provide a handle in the middle for removal from locker. Finishing: Each component shall receive a coat of baked-on Olive Drabe enamel. The finish coats shall build a total film thickness of not less than .7 mils a nd shall be installed according to the manufacturer?s recommendations. All responsible sources may submit an offer. All Contractors submitting a proposal are reminded that you must be registered in the Central Contractor Registration database to be considered for award. The website for CCR is http://ccr.ccr2000.com. The following provision(s) apply to this acquisition. FAR 52.212-1 Instructions To Offerors ? Commercial Items (MAR 2000), FAR 52.212-4 Contract Terms & conditions ? Commercial Items (MAY 1999), FAR 52.219-6 Total Small Business Set-Aside (JUL 1996). Far 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders ? Commercial Items with the following applicable clauses for Para (b) apply to this acquisition: (22) (24) and under Para (e) the following apply: (1), (2), (3), and (4). The following DFAR Clauses apply to this acquisit ion: DFAR 252.212-7001 Contract Terms and Conditions required to implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items with the following applicable clauses for Para (b): DFAR 252.225-7035 Buy American Act ? North American Free Trade Agreement Implementation Act ? Balance of Payments Program Certificate; DFAR 252.225-7036 North American Free Trade Agreement Implementation Act; DFAR 252.225-7008 Supplies To Be Accorded Duty-Free Entry; DFAR 252.225-7037 Duty-Free Entry ? NAFTA County End Products and Supplies; DFAR 252.232-7009 Payment by Electronics Funds Transfer. Proposals are solicited FOB Destination to Camp Pendleton, CA. Delivery is required for all items on or before 10 May 2002. The government will award a contract resulting from this solicitation to the lowest priced technically acceptable offer. Award is to be on an all or no ne. Offers shall be submitted no later than 01 May 2002 to Sgt McKnight via fax or mail. Offers can be sent via US Postal Service to Regional Contracting Offices, P. O. Box 1609, Oceanside, Ca. 92051-1609 Attn: Sgt McKnight. If offer is to be sent via Federal Express, the address is ?Regional Contracting Division, Bldg. 22180, MCB, Camp Pendleton, Ca. 92055, Attn: Sgt McKnight. Phone Number (760)725-3237.? Faxed offer should be addressed to Sgt McKnight 760-725-8445/4346, and clearly state the solicitation number on the first page to ensure receipt. Offerors bear the burden of ensuring that all pages of the quote reach the designated office before the deadline specified in the solicitation. Offers shall include a completed copy of the provision at FAR 52.212-3, Offerors Representations and Certification ? Commercial Items (the best way to complete this certification is to do wnload the FAR Clauses (Volume II) at http://www.arnet.gov/far, print out the clause Far 52.212-3, and fill in the appropriate blanks). Award is anticipated on 01 May 2002. Offers, including price, are binding for 30 days after submission and written acceptance of an offer by the government will result in a contract.
- Web Link
-
Click here to see combined synopsis/solicitation
(http://www.neco.navy.mil)
- Record
- SN00065660-W 20020426/020424213505 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |