SOLICITATION NOTICE
83 -- VARIOUS SHEETING
- Notice Date
- 5/17/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of Justice, Federal Prison Industries/UNICOR, Procurement Branch, 320 First Street, N.W., Washington, DC, 20534
- ZIP Code
- 20534
- Solicitation Number
- CT1502-02
- Response Due
- 7/9/2002
- Archive Date
- 7/24/2002
- Point of Contact
- Mellisa Rhinehart, Contracting Officer, Phone 202-305-3787, Fax 202-305-7344, - Joscie Barnes, Contracting Officer, Phone 202-305-7268, Fax 202-305-7344,
- E-Mail Address
-
mrhine@central.unicor.gov, jbarnes@central.unicor.gov
- Description
- UNICOR, FPI intends to enter into a Firm Fixed Price Requirements type contract for sheeting fabric. This requirement will be issued as a Request for Proposal. The period of performance is for three (3) years. Specifications shall be as follows: LINE ITEM 0001 - FAB0106 - SHTG, CTT/POLY,WHT,66"W,PRESHRUNK-180* I.A.W.ASTM-D-5431-93,W/THE EXCEPTIONS TO THE SPEC:PG2,TBL1, DIMENSIONAL CHANGE SHALL BE 3% MAX. INSTEAD OF 2%.PG2,3.1.5 SUBST:"NOT FEWER THAN 180 YARNS",W/"180 +/-3 YARNS PER SQ.IN. ADDITIONS TO THE SPEC:FABRIC SHALL CONTAIN 35% CTT. MIN., AND SHALL HAVE TWO (2) FAST SELVAGE EDGES, UNIT/MEASURE: YD. PUT UP: MATERIAL SHALL BE PUT UP ON ROLLS OF 500 YDS. +/- 50 YDS. CLOTH SHALL BE CONTINUOUS LENGTHS, EACH NOT LESS THAN 200 YDS.(BETWEEN SPLICES). SLICES SHALL BE SEWN ENDS. ROLL CORE SHALL BE 3" IN DIA. MIN. PRESERVATION SHALL BE I.A.W. FED SPEC. PPP-P-1134B COMMERICAL. COC/TEST REPORTS MUST ACCOMPANY SHIPMENT. LINE ITEM 0002 - FAB0109 - SHTG,CTT/POLY,WHT,81"W,PRESHRUNK-180* I.A.W.ASTM-D-5431-93,W/THE EXCEPTIONS TO THE SPEC: PG2,TBL1,DIMENSIONAL CHANGE IN SHALL BE 3% MAX. INSTEAD OF 2%. PG2,3.1.5 SUBSTI:"NOT FEWER THAN 180 YARNS",W/"180 +/-3 YARNS PER SQ. IN.ADDITIONS TO THE SPEC:FABRIC SHALL CONTAIN 35% CTT MIN., AND SHALL HAVE TWO(2) FAST SELVAGE EDGES. PUT UP: MATERIAL SHALL BE PUT UP ON ROLLS OF 500 YDS. +/- 50 YDS. CLOTH SHALL BE CONTINUOUS LENGTHS,EACH NOT LESS THAN 200 YDS.(BETWEEN SPLICES). SLICES SHALL BE SEWN ENDS.ROLL CORE SHALL BE 3" IN DIA. MIN. PRESERVATION SHALL BE I.A.W. FED SPEC. PPP-P-1134B COMMERICAL. COC/TEST REPORTS MUST ACCOMPANY SHIPMENT. UNIT OF MEASURE: YD LINE ITEM 0003 - FAB0117 - SHTG,CTT/POLY,WHT,72"W,PRESHRUNK-180* I.A.W.ASTM-D-5431-93,W/THE EXCEPTIONS TO THE SPEC: PG2,TBL1,DIMENSIONAL CHANGE IN SHALL BE 3% MAX. INSTEAD OF 2%.PG.2,3.1. 5,SUB:"NOT FEWER THAN 180 YARNS",W/"180 +/- YARNS PER SQ IN". ADDITIONS TO THE SPEC: FABRIC SHALL CONTAIN 35% CTT. MIN. AND SHALL HAVE TWO FAST SELVAGE EDGES. PUT UP: MATERIAL SHALL BE PUT UP ON ROLLS OF 500 YDS. +/- 50 YDS. CLOTH SHALL BE CONTINUOUS LENGTHS,EACH NOT LESS THAN 200 YDS.(BETWEEN SPLICES). SLICES SHALL BE SEWN ENDS.ROLL CORE SHALL BE 3" IN DIA. MIN. PRESERVATION SHALL BE I.A.W. FED SPEC. PPP-P-1134B COMMERICAL. COC/TEST REPORTS MUST ACCOMPANY SHIPMENT. UNIT OF MEASURE: YD. LINE ITEM 0004 - FAB0475 - SHTG,CTT/POLY,WH/BLU,66"W,PRESHK180* I.A.W. ASTM-D-5431-93,WITH THE EXCEPTION TO THE SPEC: PG.2,TBL1,DIMENSIONAL CHANGE EACH DIRECTION 3% MAX INSTEAD OF 2%.PG.2 3.1.5,SUBSTIT:"NOT FEWER THAN 180 YARNS"W/"180 +/-3 YARNS PER SQ IN". ADD TO THE SPEC: FABRIC SHALL CONTAIN 35% CTT. MIN. AND SHALL HAVE TWO (2) FAST SELVAGE EDGES. UNIT/MEASURE: YD. THERE SHALL BE A FAST SELVAGE ON EACH EDGE. SHEETING SHALL BE MARKED WITH CONTINUOUS DESIGN, LENGTHWISE DOWN EACH SIDE OF THE MATERIAL. MARKING SHALL BE POSITIONED 18" FROM EACH SELVAGE EDGE AND SHALL BE COLOR BLUE, PMS-280, PERMANENT TYPE INK THAT WILL NOT WASH OUT OR BLEED AFTER REPREATED WASHINGS. MARKING SHALL CONSIST OF THE V.A. LOGO AND LETTERING ON THREE SEPARATE LINES WHICH SHALL READ AS FOLLOWS: DEPARTMENT OF VETERANS AFFAIRS PROPERTY - NOT FOR SALE PUT UP: MATERIAL SHALL BE PUT UP ON ROLLS OF 500 YARDS, +/- 50 YARDS. CLOTH SHALL BE IN CONTINUOUS LENGTHS, EACH NOT LESS THAN 200 YARDS (BETWEEN SPLICES). SPLICES SHALL BE SEWN ENDS. PRESERVATION SHALL BE IN ACCORDANCE WITH FED SPEC PPP-P-1134B, COMMERICAL. CERTIFICATE OF COMFORMANCE MUST ACCOMPANY OR PRECEDE ALL SHIPMENTS. Delivery is FOB Destination: FCI Miami, Florida. Delivery Acceptance is 45 calendar days on initial delivery and five working days on all subsequent deliveries, unless within a 45 day period, amount ordered exceeds inventory stock level. In this case, the delivery will be 45 days. The estimated quantity for FAB0106 is 6,000,000 yards; FAB0109 is 750,000 yards; FAB0117 is 600,000 yards; and FAB0475 is 1,200,000 yards. Bid Samples are required for EACH LINE ITEM and are a condition of contract award. This requirement is all or none and is domestic only. The award will be based on the best value to the Government. The evaluation factors are: past performance, ability to conform to specifications, and price. Additional information will be provided in the solicitation that is due to be issued on or about June 4, 2002. All interested parties shall retrieve a complete copy of the solicitation from the Federal Business Opportunities website at: www.eps.gov. No telephone or mailed requests will be honored. All questions/inquiries shall be put in writing and addressed to the Contracting Officer indicated in this notice. All responsible sources may submit an offer that shall be considered. One original signed copy of the solicitation is to be completed in its entirety and mailed to the attention of Mellisa Rhinehart, UNICOR Clothing & Textiles Business Group, 6th Floor, 400 First Street, NW, Washington, DC 20534.
- Place of Performance
- Address: UNICOR, FEDERAL PRISON INDUSTRIES, 15801 SW 137TH AVENUE, MIAMI, FLORIDA
- Zip Code: 33177
- Country: USA
- Zip Code: 33177
- Record
- SN00078885-W 20020519/020517213126 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |