SOLICITATION NOTICE
36 -- Horizontal Wet Magnetic Inspection Machine
- Notice Date
- 5/24/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Supply Systems Command, FISC, Norfolk Naval Shipyard Annex, Building 1500 Code 530, 2nd Floor, Portsmouth, VA, 23709-5000
- ZIP Code
- 23709-5000
- Solicitation Number
- N00181-02-Q-0490
- Response Due
- 6/17/2002
- Archive Date
- 7/2/2002
- Point of Contact
- Jacqueline Nichols, Contract Specialist, Phone 757-396-8366, Fax 757-396-8368,
- E-Mail Address
-
nicholsjl@nnsy.navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined solicitation/synopsis for commercial items prepared in accordance with FAR 13 with the format in Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. The applicable solicitation number is N00181-02-Q-0490. The NAICS classification is 334519 and the small business size standard is 500 employees. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 10-06 and DFAR Change Notices effective through 12/6/01. It is requested that two quotes be submitted for consideration Horizontal Wet Magnetic Inspection Machines: one quote for a Single Vector Wet Horizontal MPI Unit and one quote for a Three Vector Wet Horizontal MPI Unit. Note only one type will be actually purchased and for a quantity of one (1) each. Provide catalog/spec sheets, etc with quotes. The specifications are as follows: (1) 480 VAC 60 Hz three phase input, (2) 6000 AMPS FWDC output, (3) 12 inch (30.48cm) coil, (4) 54 inch (137.16cm) part length (44 inch for multi-vector), (5) adjustable control panel, (6) heavy duty air cooled power supply, (7) heavy duty all copper buss work, (8) heavy duty bed rail system, (9) heavy duty gear-driven tailstock, (10) heavy duty pneumatic-driven headstock, (11) single electronic logic unit controls sequencing, (12) solid state head-coil switching, (13) stainless steel hip bar, (14) pair of 1/4 inch lead contact plates, (15) heavy duty coil carriage with sealed wheels, (16) digital ammeter with reading hold feature, (17) fully variable closed loop current control, (18) closed loop current regulation, (19) controlled break, (20) maximum current limit adjustment, (21) automag cycle control, (22) master on/off switch on operator panel, (23) power line safety contactor, (24) hard maple front & rear grates, (25) stainless steel tank, (26) heavy duty gasketed rear panels, (27) heavy duty gasketed and hinged front doors, (28) sealed cabinet base construction, (29) mag current range expander, (30) split push bars for dual current controls, (31) motor driven tailstock with automatic lock, (32) extra large head & tail stock with 12 inch x 12 inch contact plates, (33) rotating head & tailstock, (34) high intensity handheld black light with mounting arm, (35) hood, ventilator and white light, split fire resistance curtain, (36) automatic reversing DC demag, (37) current fault alarm - adjustable with PLC option, (38) fused master disconnect, (39) heavy duty gear driven tailstock with 12 inch x 12 inch contact plates, (40) outboard work rest, (41) PLC menu system, (42) pneumatic motor-drive for tailstock, (43) workpiece adapters, (44) UB400SA, 400 watt swing-away black light, (45) two 120 volt receptacles, (46) two year warranty and 2 copies of operator's manual, (47) single operator control panel, (48) stainless steel pump, (49) drain for holding tank, (50) uses industry standard perishables, (51) pump runs by solid state contactor. Additional specifications applicable to the Multi-Vector Wet Horizontal MPI unit only: (52) unit must be able to operate in either contact, standard coil or multi-vector mode, (53) three individual digital ammeters with reading hold feature, (54) three individual power controls, one for each vector. Contractor to provide cable and conduit to the machine, internal power hook-up of machine, initial set-up, testing and calibration of machine must be in accordance with NAVSEA Technical Publication T9074-AS-GIB-010/271. All items under this quote shall be FOB Destination, NNSY Portsmouth, VA 23709. Inspection/Acceptance shall be at Destination. REQUIRED DELIVERY: unit must be received at NNSY by 16 September 2002. FAR 52.212-1, 52.212-2, 52.212-3, 52.212-4, 52.212-5 (11), (12), (13), (14), (15), (16), and (24) apply. DFAR 252.212.7000, 252.225-7001, 252.225-7012, and DFAR 252.204-7004, REQUIRED CENTRAL CONTRACTOR REGISTRATION applies to this acquisition. Lack of registration in the CCR database can make an offeror/quoter ineligible for award. Info can be obtained through the Internet at www.ccr.gov. Offer must include a completed copy of the provision at 52.212-3 Offer Representation and Certification--Commercial Items and DFAR 252.212-7000. Offer shall be evaluated for fair and reasonable price, technical acceptability, adherence to applicable clauses, and provisions. Parties responding to this solicitation may submit their quote in accordance with their standard commercial practices (e.g. company letterhead, formal quote form, etc.) but must include the following (1) complete mailing/remittance addresses; (2) prompt payment discounts; (3) anticipated delivery; (4) name of manufacturer you are quoting; (4) taxpayer identification number; (5) all completed certifications as required herein. All quotations must be received by 2:00 PM local time 17 June 2002. Questions/responses to this solicitation should be faxed to (757) 396-8368, via mail addressed to: Fleet & Industrial Supply Center, Norfolk Naval Shipyard Annex, Attn: Code 532.1H/J. Nichols, Bldg. 1500, 2nd Floor, Portsmouth, VA 23709-5000; or via email at nicholsjl@nnsy.navy.mil. IMPORTANT INTERNET ADDRESSES: (1) Federal Acquisition Regulations (FAR) http://www.arnet.gov/far; Defense Federal Acquisition Regulations Supplement (DFARS) http://www.dtic.mil/dfars. This requirement is 100% set-aside for small business.
- Place of Performance
- Address: Norfolk Naval Shipyard, Portsouth, Virginia
- Zip Code: 23709-5000
- Zip Code: 23709-5000
- Record
- SN00083105-W 20020526/020524213248 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |