SOLICITATION NOTICE
34 -- SURFACE GRINDER
- Notice Date
- 6/10/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
- ZIP Code
- 44135
- Solicitation Number
- 3-203059
- Response Due
- 6/24/2002
- Archive Date
- 6/10/2003
- Point of Contact
- Jean M. Boylan, Purchasing Agent, Phone (216) 433-2140, Fax (216) 433-2480, Email Jean.M.Boylan@grc.nasa.gov
- E-Mail Address
-
Email your questions to Jean M. Boylan
(Jean.M.Boylan@grc.nasa.gov)
- Description
- This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This procurement is being conducted under the Simplified Acquisition Procedures (SAP). 1.) SURFACE GRINDER (PER ATTACHED SPECIFICATIONS) * HARIG CODE: 61811908 OR EQUAL QUANTITY REQUIRED: 1 EACH 2.) CARRIAGE MOUNTED FULL ENCLOSURE HARIG CODE NUMBER: 16911275 OR EQUAL QUANTITY REQUIRED: 1 EACH 3.) WET GRIND PACKAGE FOR ENCLOSURE HARIG CODE NUMBER: 16811342 * (INCLUDES PUMP, TANK, AND HARDWARE) OR EQUAL QUANTITY REQUIRED: 1 EACH 4.) HARIG 2-1/2 HP MOTORIZED SPINDLE (IN LIEU OF STANDARD SPINDLE) HARIG CODE NUMBER # 16200378 OR EQUAL QUANTITY REQUIRED: 1 EACH 5.) VARIABLE SPEED REVERSING SPINDLE (CONTROL 360 TO 7200 RPM WITH AUTOMATIC AND GENTLE REVERSING, WITH SPEED METER) HARIG CODE NUMBER 16813601 OR EQUAL QUANTITY REQUIRED: 1 EACH 6.) EXTRA SET OF PROGRAM MANUALS QUANTITY REQUIRED: 1 SET 7.) EXTRA SET OF MAINTENANCE MANUALS QUANTITY REQUIRED: 1 SET 8.) EXTRA SET OF MACHINE SOFTWARE QUANTITY REQUIRED: 1 SET SPECIFICATIONS: 1. Minimum table size 6? by 18? and work height of 11?? 2. Wheel guard with capacity for 8? diameter by ?? wide wheel. 3. All V- and Flat ways must be scraped 4. Variable speed reversing spindle (minimum 2? HP motor) with control from 360 to 7200 RPM with automatic and gentle reversing, and speed meter. 5. Ability to operate in manual or CNC control (two-axis, PC-based, absolute and incrementally programmable, with conversational programming language). 6. Hydraulic longitudinal table feed with on/off control, soft shift hydraulics and regulating valve for speed from 3 FPM to 70 FPM (minimum). And quick cylinder disconnect for manual longitudinal table drive operation. 7. Slip ring dial hand wheels for vertical and cross feed travel. Disengaging hand wheel on longitudinal (x) axis 8. Carriage mounted full enclosure with complete wet grind capability (including pump, tank, and filters). 9. Wheel dress size compensation. 10. Inch/Metric capability. 11. All components must be able to fit within a footprint of 65? x 95?. 12. Electrical requirements: 230V, 3-phase, 60/50 hz ALL PROSPECTIVE CONTRACTORS MUST BE REGISTERED IN THE CENTRAL CONTRACTOR REGISTRATION DATABASE PRIOR TO ANY AWARD OF A CONTRACT OR PURCHASE ORDER. REGISTER AT http://www.CCR.gov The provisions and clauses in the RFQ are those in effect through FAC 01-07. This procurement is a total small business set-aside. See Note 1. The NAICS Code and the small business size standard for this procurement are 332721 and 500, respectively. The quoter shall state in their quotation their size status for this procurement. The DPAS rating for this procurement is DO-C9. Quotations for the items(s) described above are due by COB ON 6/24/2002 and may be Faxed to Jean Boylan @ 216 433-2480 and include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), Cage Code, taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. If the end product(s) quoted is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the quoter shall so state and shall list the country of origin. The Representations and Certifications required by FAR 52.2l2-3 may be obtained via the internet at URL: http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/ The FAR may be obtained via the Internet at URL: http://www.arnet.gov/far/ The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm Questions regarding this acquisition must be submitted in writing no later than COB 6/14/2002. Award will be based upon overall best value to the Government, with consideration given to the factors of proposed technical merits, price and past performance; other critical requirements (i.e., delivery) if so stated in the RFQ will also be considered. Unless otherwise stated in the solicitation, for selection purposes, technical, price and past performance are essentially equal in importance. It is critical that offerors provide adequate detail to allow evaluation of their offer (see FAR 52.212-1(b). Quoters must provide copies of the provision at 52.212-3, Offeror Representation and Certifications - Commercial Items with their quote. See above for where to obtain copies of the form via the Internet. An ombudsman has been appointed - See NASA Specific Note "B". It is the quoter's responsibility to monitor the following Internet site for the release of amendments (if any): http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=22 Potential quoters will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). See Note(s) 1. Any referenced notes can be viewed at the following URL: http://genesis.gsfc.nasa.gov/nasanote.html
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=22#101836)
- Record
- SN00090986-W 20020612/020610213708 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |