SOURCES SOUGHT
51 -- 5180-01-441-6698
- Notice Date
- 8/12/2002
- Notice Type
- Sources Sought
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131
- ZIP Code
- 64131
- Solicitation Number
- Reference-Number-5180-Highway-Safety-Tool-Kit
- Response Due
- 8/16/2002
- Point of Contact
- Genia Watson, Contract Specialist, Phone (816) 823-1296, Fax (816) 926-3678,
- E-Mail Address
-
genia.watson@gsa.gov
- Description
- 5180-01-441-6698 UI: KT TOOL KIT, HIGHWAY SAFETY: DESCRIPTION Consists of the following components: 1. Blanket, Reflective Thermal Material, size 56" X 84", weight 3 oz. Qty-1 2. Box, plastic, trunk storage. Size 19" long X 11" wide X 4-1/2" deep. Molded integral carrying handle and padlock eye. Positive locking latches. Seperate interior compartment for light stick storage. Qty-1 3. Cable, Booster, Automotive Battery. 10 GA two-conductor copper cable, with flexiblerubber cover Agle design copper terminal clamps with grips. 12 ft. overall length. Qty-1 4. Cutter, Utility. For cutting seat belts and snall gage wire. 2 inch cut stailess steel blades with blunt tips and wire cutter notch. High visibility orange "spring opening" plastic handles with mechanism to lock handles and blades in closed position, 7-3/8" overall length. Qty-1 5. Flashlight. Standard duty battery operated two cell flashlight for geeneral used. Yellow impact resistant plastic body. Batteries not furnished. (D-size). Qty-1 6. Gloves, cotton. General purpose one-size cotton gloves with knit wristband. Qty-1 Pr. 7. Light stick, chemical. 30 minute light yellow glow light 5-3/8 inch" stick length. Instructions printed on package. Qty-1 8. Pillow, inflatable, plastic. Minimum inflated size 12" X 9" X 3". Qty-1 9. Pliers, slip joint, 8". Forged, steel, straight nose, with serated teeth. Rust resistant finish with plastic hand grips. Qty-1 10. Reflector, Highway warning. Warning. Plastic, 17 inch side triangle with red reflective band on outer border on each side. Self standing with weighted base. Folds for compact storage. Qty-1 11. Screwdriver, Cross Tip. No. 2 phillips tip, 4" blade length, 8" overall length. Comfort grip 4 fluted plastic handle. Blade treated with corrosion resistant material. Qty-1 12. Screwdriver, Flat Tip. 1/4" tip width, 4" blade length, 8" overall length. Comfort grip 4 fluted plastic handle. Blade treated to resist corrosion. Qty-1 PACKAGING Preservation/Packing: Each tool kit shall be packed in a close fitting fiberboard box that will offer protection during shipping, handling, storage and redistribution. If the tool kits are to be packaged in multiple shipping containers, each kit is to be packed as stated above and the quantity of kits packaged per shipping container, as well as the size of shipping container, shall be uniform throughout the contract period. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification. Prohibition on Plastic Packaging and Packing: The use of plastic in packaging and/or packing is prohibited. The definition of plastic shall be as defined in ASTM D883-93. MARKING All deliveries/shipments made under a contract for the NSN'S identified in the item listing are required to have bar code marking on the unit, intermediate, exterior shipping containers, and palletized or unitized loads pursuant to Federal Standard Number 123 for deliveries to civilian activities, or Military Standard Number 129 for deliveries to military activities, as applicable. All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with FED-STD-123G, dated June 6, 1997, or marked and bar coded for delivery to military activities in accordance with MIL-STD-129N, dated 15 May 1997, as applicable. PALLETIZATION Pallet Sizes: Unless otherwise specified, the pallets shall be 48" X 40" or 40" X 48" in length and width. Exceptions such as 48" X 48" will be used only with the concurrence of the Office of Distribution Management (FS). Pallet Type Options: Unless otherwise specified, the pallets shall be one of the following two options: 1. PPP-P-1660A, Type I, Type IA, Type II, or Type III. The following designs are acceptable: Style 2 and 7, Class B or C, Grade 2, Sizes 40" x 48", 48" x 40", 4 way (block post) or partial 4 way entry (stinger), non-reversible. 2. ASME MH1.8M-1996, Wood Pallets, An American National Standard. Class 1 and 2, Category 2, Type 3, Style 2, Bottom Deck 1, Sizes 40" x 48" and 48" x 40". Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight. Exceptions to this requirement shall have the concurrence of the Office of Distribution Management. Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Then vertical, horizontal, or filler reinforcement shall be added as necessary to provide the strength necessary to support three additional palletized loads. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Palletized Load Stacking Test: The palletized load as presented for shipment shall be tested for stackability. The test load shall be placed on a rigid surface with three additional loads stacked on top for 24 hours. The tester has the option of simulating the three additional loads with a like pallet and weight equaling three like loads. Example: If the pallet load weighs 1000 pounds then 3000 pounds on a like pallet, shall be stacked on the test load for 24 hours. Test personnel shall be responsible to test in compliance with National and local safety regulations. Testing need not be repeated as long as the palletized load design and materials do not change. Partial Palletized Loads: Less than one-half pallet loads do not require testing. Shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only.
- Record
- SN00138874-W 20020814/020812213816 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |