SOLICITATION NOTICE
N -- Electrical Installation of Hospital Equipment
- Notice Date
- 8/22/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Military Sealift Command, Military Sealift Command Pacific, 140 Sylvester Road Naval Base Base Point Loma- Bldg 139 3rd Floor, San Diego, CA, 92106-3521
- ZIP Code
- 92106-3521
- Solicitation Number
- N62383-02-Q-4240
- Response Due
- 8/29/2002
- Point of Contact
- Clarita Jones, Contract Specialist, Phone 619-553-7678, Fax 619-553-7774, - Marie Garrett, Contract Specialist, Phone 619-553-9898, Fax 619-553-7695,
- E-Mail Address
-
clarita.jones@msc.navy.mil, marie.garrett@.msc.navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- A. STER-AD Plasma Sterilizer installation in Central Sterile Receiving, Clean side: 1. Locate and provide power (450V 3 ph) from the nearest available location. All cable, cable support, and penetrations of decks and bulkheads are to be in accordance with ABS/USCG regulations. 2. Provide and install transformers, make all hook-ups and test operate the equipment with the assistance of the ship?s Medical Equipment repair personnel. Machine requires 208V/60hz/20amp/3 phase. B. Ultrasonic cleaner installation in Central Sterile Receiving, Dirty side: 1. Provide power from the Main Laboratory 240 VAC panel AP79. Install a 50 amp breaker in place of the one of the 15 amp spare breakers. Remove and blank off two additional 15 amp breakers and turn the three excess breakers over to the vessel?s Chief Electrician. All breakers, cable, cable support, and penetrations of decks and bulkheads are to be in accordance with ABS/USCG regulations. 2. Make all hook-ups and test operate the equipment with the assistance of the ship?s Medical Equipment repair personnel. Machine requires 240 VAC, single phase, 60 Hz, 45 Amps. C. Laser Film printer installation in Radiology 1. Provide power from the Electrical Equipment Room 1-43-1. Utilize a spare 15 amp breaker, located on Panel EP-53A. All cable, cable support, and penetrations of decks and bulkheads are to be in accordance with ABS/USCG regulations. 2. Make all hook-ups and test operate the equipment with the assistance of the ship?s Medical Equipment repair and radiology department personnel. Machine requires 240VAC, single phase, 60 Hz, 9 Amps max draw. Vessel Location: San Diego, California Period of performance: 1-30 September 2002
- Place of Performance
- Address: San Diego, California
- Zip Code: 92106
- Country: USA
- Zip Code: 92106
- Record
- SN00148085-W 20020824/020822214026 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |