SOLICITATION NOTICE
31 -- ROLLER BEARING FOR J85 ENGINE
- Notice Date
- 8/26/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- F34601-03-Q-0012
- Response Due
- 10/11/2002
- Point of Contact
- Billie Kindschuh, Contract Negotiator, Phone (405)739-7580,
- E-Mail Address
-
billie.kindschuh@tinker.af.mil
- Description
- Presolicitation Notice Date Submitted: 27-AUG-2002 OC-ALC/LPKAA DIR CONTRACTING/PROPULSION 3001 STAFF DR STE 2AC1/109B TINKER AIR FORCE BASE OK 73145-3032 31--BEARING, ROLLER SOL F34601-03-Q-0012 OC-ALC/PKXDA TINKER AFB OK 73145-3015, For additional information contact Billie Kindschuh/LPKAA/(405)734-8114 Item 0001 NSN 3110-00-618-5880OK P/N: 327P430P1/R106KC102. DIM: 2.25 inches by 0.5 inches. FUNC: This is the upper PTO bearing for the J85 Engine. It supports the upper end of the driven PTO gear shaft. It is a ball bearing and is used to control thrust loads on the gear shaft, which provides power to the engine gearbox. APPL: J85 Engine. PREDOMINATE MATERIAL: SAE 52100 Steel. TOTAL QTY: 67 EA. DESTN: Tinker Air Force Base Ok 73145-3032. Delivery: 31 Dec 2003 15 ea, 31 Jan 2004 15 ea, 29 Feb 2004 15 ea, 31 Mar 2004 15 ea, 30 Apr 2004 7 ea. Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) 0001. The approximate issue date will be 11 SEP 2002. The approximate response date will be 11 OCT 2002. Written procedure will be used for this solicitation. To: MRC Bearings Inc. Jamestown NY 14702-0280. To: General Electric Co, Lynn Ma 01910-0445. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER (405)739-3656. See Note (s) 26.
- Record
- SN00150060-W 20020828/020826213428 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |