SOURCES SOUGHT
51 -- 5180-Riveter Tool Kit
- Notice Date
- 9/6/2002
- Notice Type
- Sources Sought
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131
- ZIP Code
- 64131
- Solicitation Number
- Reference-Number-5180-01-089-1229
- Point of Contact
- Genia Watson, Contract Specialist, Phone (816) 823-1296, Fax (816) 926-3678,
- E-Mail Address
-
genia.watson@gsa.gov
- Description
- Please review the description and submit a price for a 1 Year Standing Price Quote. Due Date: 09/16/02 5180-01-089-1229 UI: KT Price: $___________ TOOL KIT, RIVETER: The following header paragraph(s) shall apply to the item purchase description(s) where applicable. If there is a conflict between the item purchase description and the header paragraph(s), the header paragraph(s) shall take precedence over the item purchase description. Notwithstanding the requirements specified herein, cadmium plating is not acceptable. In the event no alternative coating, finish, or plating is specified, a rust preventative finish as used in standard commercial practice shall apply. When chromium plating or finish is specified and the manufacturer has a commercial coating of the same color and texture of chromium that the manufacturer uses in lieu of chromium; then the alternative coating can be used, provided the coating meets Aerospace Standard SAE AS4984. Each set or kit shall contain a dated parts list or packing list citing the GSA contract number (if applicable), GSA purchase order number, date of purchase order, kit national stock number (NSN), each component NSN (if applicable), kit noun name, each component noun name, and quantity of each component. Unless otherwise specified in the item purchase description, each kit or set and each component of the kit or set shall have, in addition to any other required marking, identification marking indicating the manufacturer's name or identifying symbol, and the state or country of manufacture. The marking shall be engraved, etched, or stamped in such a manner that it will be permanent to the extent that it will remain clear and legible throughout the life of the item. Workmanship: Details of workmanship shall be in accordance with the best commercial standards and practices. Paints, coatings, platings, and finishes shall be smooth, adherent, continuous, and not stained or discolored. Fasteners shall be firmly secured and show no evidence of deformation, cross threading, or hazardous burrs. Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied. Adhesives shall be adequately cured. Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges. Wire and cable insulation shall show no evidence of burns, abrading, or pinch marks. There shall be no interference, binding, or galling of parts. External and bearing surfaces shall be free of tool and gouge marks, nicks, or other surface imperfections. The item shall be clean and free of corrosion and debris (e.g. chips shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g., loose, missing, binding or misaligned parts, sharp or rough external edges, corners or surfaces) and material defects (e.g., pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety, or appearance. DESCRIPTION The kit consists of one (1) each of the following components furnished in a metal carrying case as specified below: 1. POWER RIVETER: Cherry/Textron part number G-704B or GBP Corp. part number GBP704. 2. PULLING HEAD: Cherry/Textron part number H701B-456 or GBP Corp. part number 456MAX-701-17. 3. AIR BLEEDER: Cherry/Textron part number 700A77 or GBP Corp. part number 704153. 4. GRIP SELECTOR GAGE: Cherry/Textron part number 269C3 or GBP Corp. part number 269G3. 5. STEM CATCHER BAG: Cherry/Textron part number 670A20 or GBP Corp. part number 704214. 6. POWER RIVETER MANUAL: 7. PULLING HEAD SHEET: 8. PROCESS MANUAL: 9. POCKET CARD: 10. CARRYING CASE: Cherry/Textron part number P1393 or GBP Corp. part number 704221. END OF COMPONENT LIST. END ITEM IDENTIFICATION: Cherry Division/Textron Corporation part number G-704BCMR or GBP Corporation part number GBP704ARK. ITEM MARKING Each item (including all items within a set or kit) shall be marked with the manufacturer's name and identifying symbol, and the state or country of manufacture, unless otherwise specified. All marking shall be engraved, etched, molded, or indented. PACKAGING One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. Preservation/Packing: Each tool kit shall be packed in a close fitting fiberboard box that will offer protection during shipping, handling, storage and redistribution. The packed tool kit shall be marked in accordance with standard commercial practice. Shipping Container: Each kit shall be packed as stated above and the quantity of kits packaged per shipping container shall be uniform. The shipping container shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 or ECT 32. PACKING The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 or ECT 32. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with FED-STD-123G, dated June 6, 1997, or marked and bar coded for delivery to military activities in accordance with MIL-STD-129N, dated 15 May 1997, as applicable. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight. Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only.
- Record
- SN00160287-W 20020908/020906214035 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |