SOLICITATION NOTICE
48 -- VALVE,GATE
- Notice Date
- 9/10/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- DEFENSE SUPPLY CENTER COLUMBUS; MARITIME SOLICITATIONS/AWARDS P.O. BOX 16704; COLUMBUS, OH 43216; US
- ZIP Code
- 00000
- Solicitation Number
- SPE760-02-T-0738
- Point of Contact
- GARY L. WEAVER, (614)692-5033
- E-Mail Address
-
Email your questions to GARY L. WEAVER
(gary.weaver@dscc.dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- VALVE, GATE. ASTM B61 BRONZE BODY. CRES SEAT. SOLID WEDGE, INSIDE SCREW RISING STEM. 200 PSI MAX. OPERATING PRESSURE. 550 DEG. F. MAX. OPERATING PRESSURE. 1 IN. SIZE. THREADED FEMALE PIPE CONNECTIONS. PROCURE IAW MANUFACTURERS STANDARDIZATION SOCIETY SPECIFICATION TITLED "BRONZE GATE, GLOBE, ANGLE AND CHECK VALVES." COPIES OF REFERENCED MSS STANDARD MAY BE OBTAINED FROM: MANUFACTURERS STANDARDIZATION SOCIETY 127 PARK STREET NE VIENNA, VA. 22180 IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE, HOWEVER, THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO; I.E., THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). "CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS." CERTIFICATE OF QUALITY COMPLIANCE APPLIES - DLAD 52.246-9000 . DLAD CLAUSE 52.246-9004, PRODUCT VERIFICATION TESTING, IS HEREBY INCORPORATED, AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. . CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN NATIONAL STANDARD FOR CALIBRATION - CALIBRATION LABORATIORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS, OR ISO 10012-1, QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR MEASUING EQUIPMENT. FULL AND OPEN COMPETITION APPLY PROCURE IAW MANUFACTURERS STANDARDIZATION SOCIETY SPECIFICATION TITLED "BRONZE GATE, GLOBE, ANGLE AND CHECK VALVES." COPIES OF REFERENCED MSS STANDARD MAY BE OBTAINED FROM: MANUFACTURERS STANDARDIZATION SOCIETY 127 PARK STREET NE VIENNA, VA. 22180
- Place of Performance
- Address: ADDITIONAL DELIVERY INFO; SEE ADDITIONAL DELIVERY INFO; , AA 00000; US
- Zip Code: 00000
- Country: US
- Zip Code: 00000
- Record
- SN00162004-W 20020912/020910213047 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |