SOLICITATION NOTICE
A -- INNOVATIVE TACTICAL TECHNOLOGY
- Notice Date
- 9/13/2001
- Notice Type
- Solicitation Notice
- Contracting Office
- Other Defense Agencies, Defense Advanced Research Projects Agency, Contracts Management Office, 3701 North Fairfax Drive, Arlington, VA, 22203-1714
- ZIP Code
- 22203-1714
- Solicitation Number
- BAA01-45
- Response Due
- 9/13/2002
- Point of Contact
- Robert Rosenfeld, Program Manager, DARPA Tactical Technology Office (TTO), Phone (703) 696-2327, Fax none, - Algeria Tate, Contracting Officer, DARPA Contracts Management Office (CMO), Phone (703) 696-2384, Fax None,
- E-Mail Address
-
none, None
- Small Business Set-Aside
- N/A
- Description
- PROGRAM DESCRIPTION AND GOALS: DARPA's Tactical Technology Office (TTO) is soliciting proposals for advanced research and development of system and sub-system level technology for integration into the tactical environment that provide revolutionary improvements to the efficiency and effectiveness of the military, relative to current modes of operation. The goal of the program is the identification of areas for potential improved performance, and the design of systems and sub-systems to validate performance gains. The program focuses on the development of complete systems or subsystems rather than the enabling technologies. Proposed systems and sub-systems need not be composed entirely of newly developed components, but may integrate new technology into existing systems and/or subsystems. Proposed efforts should constitute at least two phases. The first phase should seek to establish the technical feasibility of the concept. Phases beyond the first should be proposed as options leading toward technology development. AREAS OF INTEREST: DARPA-TTO has four primary focuses: aeronautic systems, space systems, land systems, and embedded processors and control systems. Its specific areas of interest include (but are not limited to) the following: improved deployability; reduced logistics burden; force projection and rapid ingress; logistic-support delivery systems; land vehicles, aircraft, and spacecraft capable of new classes of missions; robotic vehicles, aircraft, and spacecraft for surveillance, combat, and other missions; expanded flight regimes; advanced rotorcraft; biologically-inspired flight; subsonic through hypersonic flow control by plasmas or other means; unmanned combat air vehicle (UCAV) architectures and designs, including lethal naval missions; flight control, aerodynamics and propulsion concepts; rapid access, small cargo, affordable launch to orbit; short take-off and vertical landing manned, unmanned, and micro air vehicles; aircraft and missiles that are small-scale and carry effective mission packages; new spacecraft missions; on-orbit replenishment and component upgrade; modular spacecraft design and efficient utilization of space; autonomous spacecraft guidance, navigation, and control software; spacecraft sensors; exploitation of phenomenology observed from space platforms; improved weapons and precision guided munitions; high-speed and long range weapons; high energy density propellants and explosives; passive and active protection systems; compact, high density pulse power supplies and pulse forming networks; high performance mobile power sources; high power lasers; innovative internal combustion engines; innovative turbine engines; innovative rocket engines; innovative spacecraft propulsion; network-centric distributed command and control and fire control systems; multiple redundancy communication systems; embedded processing and control; imaging through clouds and battlefield obscurants; sensor / data fusion; terrain intensification; multi-sensor data registration; real time adaptive sensor/platform control; automatic tactical sensor exploitation; technologies to deny situational awareness; modeling and simulation for evaluating new technologies at force level; collaborative behavior among several robotic (air, ground, or space) vehicles; innovative hybrid electric propulsion systems for flight vehicles; sensors for collision avoidance and Geo-location without global positioning system (GPS); self learning algorithms for robot navigation; airborne insertion methods for robots; integrated electro-optical millimeter wave sensor technology; and electronic maps. PROGRAM SCOPE: Up to $2.0M may be available in FY 2002 for initial efforts. Multiple awards are anticipated during FY 2002. The amount of funds, if any, for efforts beyond FY 2002 has not been decided. Successful efforts during the initial funding period will increase the likelihood that TTO will make funds available after FY 2002. For Government programmatic flexibility, all offerors should segment their cost proposals as follows: an initial 12-month effort followed by one or more optional efforts. The total effort including options should not exceed four years. OFFERORS: Teaming is encouraged. Historically Black Colleges and Universities (HBCUs) and Minority Institutions (MIs) are encouraged to submit proposals and join others in submitting proposals; however, no portion of this BAA will be set aside for HBCU and MI participation because of the impracticality of reserving discrete or severable areas of research in advanced tactical technology. SCHEDULE: The purpose of the white paper is to solicit early feedback as to whether the research proposed will be of interest to TTO. It is thus in the submitter's best interest to clearly articulate the innovative concept and technology development proposed. The submission of the white paper is optional, but should be used by the offeror to avoid the expense of proposal generation for ideas that have little likelihood of selection within this BAA. Submission of white papers before 12 July, 2002 is encouraged. TTO will endeavor to respond to each white paper within thirty (30) days after its receipt with a recommendation on the likelihood of selection. Regardless of the TTO recommendation based on its review of the white paper, an offeror may submit a proposal and that proposal will be reviewed and evaluated. This BAA will remain open through 13 Sept., 2002. Proposals received after the closing date of this BAA will not be reviewed or evaluated. TTO will conduct an initial round of proposal receipt, evaluation, selection, and award. For the initial round of source selection, white papers should be submitted to TTO at the address identified below not later than 1600 local time, 26 Oct.,2001. In order to be considered for an award during this first round, proposals must be received by TTO at the address identified below on or before 1600 local time, 4 Jan., 2002. Proposals received after that date will be reviewed and evaluated in a timely fashion. As soon as the proposal evaluation is completed, the offeror will be notified that 1) the proposal has been selected and the program will be funded, or 2) the proposal has been selected pending availability of funds, or 3) the proposal has not been selected. Proposals that are selected, pending the availability of funds, will be considered eligible for award within one (1) year after the closing of this BAA. Non-selected proposals will be destroyed; however, one copy of non-selected proposals may be retained for file purposes. EVALUATION CRITERIA: Evaluation of proposals will be accomplished through a review using the following criteria, listed in descending order of importance: 1) Overall scientific and technical merit including degree of innovation, understanding of the technical and operational issues, and experimental approach. 2) Potential contribution and relevance to TTO mission by meeting the goals of the BAA. 3) Offeror's capabilities and related experience, including qualifications and achievements of all team members and their key personnel, their capability to carry out further development and production, and the adequacy of facilities and equipment to be used for the proposed effort. 4) Project and technology transfer plans. The plans to carry out the work and the plans to accomplish technology transition to use by the military services. 5) Cost realism. PROPOSAL FORMAT: The form and format for white papers and proposals follows. White papers and proposals that do not satisfy these form and format requirements may be rejected without further review or evaluation. All submissions should be in English. White Papers: White papers shall describe the problem(s) that will be solved, any existing evidence that the proposed solution(s) will be successful, and the relative impact of such a solution(s), should it or they prove successful. White papers shall contain the following parts: the Cover Sheet of Volume I of the offeror's planned proposal (see below); a summary, four pages maximum, of Volume I of the offeror's planned proposal (see below); and a one page summary of Volume II of the offeror's planned proposal (see below). The Cover Sheet shall be clearly marked "WHITE PAPER." All pages shall be printed on 8-1/2 by 11 inch paper; type not smaller than 12 point. The page limitations for white papers include all figures, tables, and charts. No formal transmittal letter is required. Offerors shall submit an original and five (5) copies of each white paper. White papers should contain neither proprietary nor classified information or data. Proposals: Each proposal shall consist of two volumes, Volume I -- Technical and Management, and Volume II -- Cost. Volume I shall consist of a Cover Sheet and three sections. Volume II shall consist of a Cover Sheet and two sections. All pages shall be printed on 8-1/2 by 11 inch paper with type not smaller than 12 point. The maximum total length of Sections I and II of Volume I is forty (40) pages including all figures, tables, and charts. There is no page limitation applicable to Volume II. An offeror shall submit an original and five (5) copies of the proposal and an official who is authorized to commit the offeror shall transmit the proposal. An offeror may submit more than one proposal. Information or data contained in a proposal, deemed proprietary by the offeror, should be clearly marked. Offerors that intend to include classified information or data as part of their proposals shall, in advance of providing their proposals to TTO, contact the Technical POC for this BAA for guidance. Volume I -- Technical and Management. Volume I, Cover Sheet. The Cover Sheet shall identify the BAA number; proposal title; offeror's number (if any); lead organization submitting the proposal; type of business (large, small, educational institution, other not-for-profit or non-profit, etc.); other team members (if applicable) and their types of business; technical points of contact; and administrative points of contact. Volume I, Section I -- Summary of Proposal. This section shall provide a summary of Section II. Volume I, Section II -- Detailed Proposal Information. This section shall provide a detailed discussion of the proposed work to enable an in-depth review of all technical and management issues. This section shall address the risks, approach, and payoffs of the proposed research. Efforts under the second phase of this program must be identified as options. In a manner of the offeror's choosing, this Section should provide: (1) A description of the intended results of the proposed work for each phase or option of the effort and the expected benefits compared to the current state-of-the-art and alternative approaches. (2) A detailed description of the technical issues, the proposed approach, its basis, and a comparison with other ongoing research showing both the advantages and disadvantages. (3) Innovative claims for the proposed research including all proprietary claims to results, prototypes, intellectual property, or systems supporting and/or necessary for the use of the research, results, and/or prototype. If there are no proprietary claims, this should be stated. (4) A Statement of Work (SOW) for each phase or option that describes the scope of the effort, the specific tasks to be performed, the milestones, and the schedule for the effort. (5) A schedule of the estimated cost for each major task in each phase or option of the effort and a schedule of the proposed company cost share. (6) A description of the proposed approach to management of the project including an organization chart showing reporting relationships, statements of the responsibilities of the team members, and the teaming strategy. (7) A description of the experience and capabilities of the offeror, each team member, and key personnel; a description of their capability to carry out further development and production; and a description of the facilities and equipment that would be used for the proposed effort. (8) A list of the deliverables associated with the proposed research. (9) A description of plans and capabilities to accomplish technology transition and commercialization. Volume I, Section III -- This Section should contain all affirmations relative to DARPA's Organizational Conflict of Interest requirements (see below). In addition, this section may provide a bibliography of relevant technical papers and research notes (published and unpublished) which document the technical ideas upon which the proposal is based. This section may also include such papers, however, DARPA is under no obligation to review and evaluate the papers. Volume II -- Cost. Volume II, Cover Sheet. The Cover Sheet shall identify the name and address of the offeror (include zip code); name, title, and telephone number of the offeror's business point of contact; recommended award instrument; place(s) and period(s) of performance; total proposed cost, separated by basic award and option(s) (if any); name, address, and telephone number of the offeror's cognizant Defense Contract Management Command (DCMC) administration office (if known); and name, address, and telephone number of the offeror's cognizant Defense Contract Audit Agency (DCAA) audit office (if known). Volume II, Section I -- Detailed Cost Breakdown. This section shall include: (1) total program cost broken down by major cost items (direct labor, subcontracts, materials, other direct costs, overhead charges, etc.) for each major program task and for each phase. (2) An itemization of major subcontracts and equipment purchases. (3) A summary showing by month the total projected cost, cost share by the offeror, and Government funding requirements. (4) A description of cost estimating methods. (5) The source, nature, and amount of any cost sharing proposed. Volume II, Section II -- Supporting Cost and Pricing Information. This section shall include supporting cost and pricing information in sufficient detail to substantiate the summary cost estimates in Section I of the cost proposal. Costs for subcontracts having 20% or more of the value of the work must be substantiated to the same level of detail as the costs of the offeror. AWARDS: Awards under this BAA will be made to responsible offerors on the basis of the evaluation criteria above and program balance to provide best value to the Government. Awards will be subject to the availability of funds. Award instruments may take the form of a procurement contract, grant, or agreement depending upon the nature of the work proposed, the required degree of interaction between parties, and other factors. Phases after Phase I will be pre-priced options. The Government reserves the right to 1) select for award all, some, or none of the proposals received, and 2) incrementally-fund any award instrument. ORGANIZATIONAL CONFLICT OF INTEREST: Awards made under this BAA are subject to the provisions of the Federal Acquisition Regulation (FAR) Subpart 9.5, Organizational Conflict of Interest. All offerors and proposed subcontractors must affirmatively state whether they are supporting any DARPA technical office(s) through an active contract or subcontract. All affirmations must state which office(s) the offeror supports and identify the prime contract number. Affirmations shall be furnished at the time of proposal submission, and the existence or potential existence of organizational conflicts of interest, as that term is defined in FAR 9.501, must be disclosed. This disclosure shall include a description of the action the offeror has taken, or proposes to take, to avoid, neutralize or mitigate such conflict. If the offeror believes that no such conflict exists, then the offeror shall so state in the affirmation. NON-GOVERNMENT PERSONNEL: All proprietary material should be clearly marked and will be held in strict confidence. Restrictive notices notwithstanding, proposals may be handled, for administrative purposes only, by Booz-Allen & Hamilton, Inc., of Arlington, VA, a support contractor, which is bound by appropriate non-disclosure requirements. Input on technical aspects of the proposals may be solicited by DARPA from non-Government consultants and experts who are bound by appropriate non-disclosure requirements. Non-Government technical consultants will not have access to proposals that are labeled by the offerors as "GOVERNMENT ONLY." Evaluations and selections under this BAA will be made only by Government evaluators. ADMINISTRATION: DARPA will reply to questions relating to this BAA and will make the replies available to prospective bidders. All correspondence including questions and requests for access to the replies to the questions regarding this solicitation should be directed to one of the addresses below. DARPA prefers to use electronic mail for correspondence regarding this BAA. However, proposals must be submitted on paper. The addresses for this BAA are: E-Mail: BAA01-45@darpa.mil; Mail: DARPA, TTO, ATTN: BAA 01-45, 3701 North Fairfax Drive, Arlington, VA 22203-1714. This BAA may be retrieved via the WWW at URL http://www.darpa.mil/ in the "solicitations" area. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (13-SEP-2001). IT ACTUALLY FIRST APPEARED ON THE FEDBIZOPPS SYSTEM ON 20-SEP-2002. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/ODA/DARPA/CMO/BAA01-45/listing.html)
- Record
- SN00172877-F 20020922/020920221633 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |