SOLICITATION NOTICE
J -- Fire Suppression Testing of Kitchen Exhaust Hood Systems
- Notice Date
- 9/25/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Direct Reporting Units, 11th CONS, 110 Luke Avenue Building 5681, Bolling AFB, DC, 20332-0305
- ZIP Code
- 20332-0305
- Solicitation Number
- Sol-02-T-0267
- Point of Contact
- Susan Starks, Contract Specialist, Phone 202-767-8034,
- E-Mail Address
-
Susan.Starks@bolling.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is issued as Request for Quotation (RFQ) No. F49642-02-T-0267. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2001-09. This is a small business set-aside. The North American Industry Classification System code is 561621 (formerly SIC code 7699) at $10,5 million size standard. LINE ITEMS: 0001 Inspect, maintain & test Fire Protection System within bldg 50, Ansul R. 102, 3 Gal, 5 cylinder, 2 systems (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0002 Inspect, maintain & test Fire Protection System within bldg 1301, Ansul R. 102, 3 Gal, 4 cylinder, 2 systems (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0003 Inspect, maintain & test Fire Protection System within bldg 1310, Kiddie HDR 25 Lbs, 3 cylinder, 1 systems (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0004 Inspect, maintain & test Fire Protection System within bldg 2482, Range Guard 2.5 Gal, 1 cylinder, 1 systems (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0005 Inspect, maintain & test Fire Protection System within bldg 2565, Ansul R. 102 3 Gal, 4 cylinder, 2 systems (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0006 Inspect, maintain & test Fire Protection System within bldg 4456, Ansul R. 102 3 Gal, 3 cylinder, 1 system (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0007 Inspect, maintain & test Fire Protection System within bldg 4514, Ansul R. 102 3 Gal, 2 cylinders, 2 systems (March and September 2003) QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0008 Inspect, maintain & test Fire Protection System within bldg 4514, Ansul R. 102 1.5 Gal, 1 cylinder, 1 systems (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0009 Inspect, maintain & test Fire Protection System within bldg 4500, Ansul R. 102, 3 Gal, 2 cylinder, 2 systems (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0010 Inspect, maintain & test Fire Protection System within bldg 6000, Kiddie HDR 25 Lbs, 5 cylinder, 3 systems (March and September 2003, QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0011 Inspect, maintain & test Fire Protection System within bldg # 1, FM-200, 900 lb, 2 cylinder, 1 systems (March and September 2003) QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________. 0012 Inspect, maintain & test Fire Protection System within bldg # 1, FM-200, 600 lb, 2 cylinder, 1 system (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________, 0013 Inspect, maintain & test Fire Protection System within bldg # 1, FM-200, 350 lb, 4 cylinder, 1 system (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________, 0014 Inspect, maintain & test Fire Protection System within bldg # 1, FM-200, 200 lb, 2 cylinder, 1 system (March and September 2003), QTY: 2/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________, 0015AA Intervening Service Calls for Base, PPMQTY: 5/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________, 0015AB Intervening Service Calls for DIA, PPM QTY: 3/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________, 0016AA Intervening Service Calls for Base, OPPM QTY: 5/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________, 0016AB Intervening Service Calls for DIA, OPPM QTY: 3/EA, UNIT PRICE: $_________, EXTENDED PRICE: $_________, 0017AA Reimbursable Parts for Base, QTY: 1/LS, UNIT PRICE: $_______NTE, EXTENDED PRICE: $______NTE, and 0017AB Reimbursable Parts for DIA, QTY: 1/LS, UNIT PRICE: $______NTE, EXTENDED PRICE: $______NTE. A complete price breakdown is required as part of your offer for each line item listed above. The following is an example: number of hours, hourly rate, materials, completion time for each building, etc. ?Notice to Offerors: Funds are not presently available for this project. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. If requirement is partially funded, it will be ?partially? awarded.? INSPECTON AND ACCEPTANCE TERMS: Supplies/services will be inspected by Quality Assurance personnel and accepted at job site. DESCRIPTION/SOW: GENERAL INFORMATION FIRE SUPPRESSION TESTING OF KITCHEN EXHAUST HOOD SYSTEMS LOCATED ON BOLLING AFB AND DIA 1. DESCRIPTION OF SERVICES. The contractor shall provide all plant, labor, tools, supplies, equipment, transportation and other items and services necessary to inspect, test, and maintain fire protection systems for commercial cooking operations (exhausthoods), at Bolling AFB DC. Systems shall be maintained in a manner that will ensure their serviceability and operation. The following installed systems can be used for determining possible workload. Building Number Type Of System Number Of Cylinder Number of systems 50 Ansul R 102, 3 gal 6 2 1301 Ansul R 102, 3 gal 5 3 1310 Kiddie HDR, 25 lbs. 3 1 2482 Range Guard, 2.5 gal 1 1 2565 Ansul R 101, 20 lbs. 4 2 4456 Ansul R 102, 3 gal 3 1 4514 Ansul R 102, 3 gal 2 2 4514 Ansul R 102, 1.5gal 1 1 4500 Ansul R 102, 3 gal 2 2 6000 Kiddie HDR, 25 lbs. 5 3 1 FM 200, 900 lbs 2 1 1 FM 200, 600 lbs 2 1 1 FM 200, 350 lbs 4 2 1 FM 200, 200 lbs 2 1 Note: the following devices are included in the Notifier FM 200 workload estimate; one control panel, one graphic annunciator, seven manual releases, seven abort stations, 17 horns/strobes, eight discharge strobes, 36 smoke detectors, (11) 180 degree ceiling nozzles, nine 360degree ceiling nozzles, three heat detectors. 1.1. INSPECTIONS. The contractor shall inspect all systems IAW applicable NFPA Standards and manufacturer?s instructions. The contractor shall correct any discrepancies or impairments to a system, discovered during a scheduled inspection within 48 hours. 1.2. TESTING. The contractor shall perform functional operation tests on installed fire extinguishing systems IAW applicable National Fire Protection Association (NFPA) Standards and manufacturer?s instructions. The contractor shall perform two tests, one in March and one in September, but not later than 30 September 2003. If the system is connected to the installation fire department, the contractor along with a government representative shall notify the fire department that a system test is to be conducted and an emergency response is not required. All personnel at the end-user?s facility shall be notified that a test is to be conducted and instructed as to the sequence of operation. Installed fire-extinguishing systems located in areas that are inaccessible for security or safety reasons, shall be tested during scheduled operation shutdowns at intervals approved by the quality Assurance Personnel (QA). 1.3. CORRECTIVE MAINTENANCE. The contractor shall perform corrective maintenance on installed fire extinguishing systems, IAW applicable NFPA Standards and manufacturer?s instructions, to return a system or component to full operating condition. The contractor shall notify the QA before proceeding with any corrective maintenance on installed fire extinguishing systems. The contractor shall recharge and return to full service all installed fire-extinguishing systems after use or as indicated by an inspection, functional test, or maintenance work. The contractor shall notify the QA in writing that corrective maintenance has been completed and shall provide a list of all work accomplished. 1.3.1. In case of system discharge, the contractor shall refill the system using manufacturer and NFPA recommended suppression agents. 1.4. EMERGENCY SERVICES. The contractor shall provide emergency service at any time and shall respond within four (4) hours of notification. The contractor shall furnish telephone numbers for emergency calls. Calls received by answering service or machine will be considered as notification. For the purpose of this specification, an emergency is any condition that requires immediate action to eliminate life or serious injury hazards to personnel, to prevent loss or damage to government property or to restore essential services. 2. GOVERNMENT FURNISHED PROPERTY AND SERVICES. The government will provide electricity, water and sewerage for the purpose of this contract only. 3. CONTRACTOR REQUIREMENTS. Except for those items and services specifically stated as government furnished, the contractor shall furnish everything needed to perform this contract according to all its terms. 3.1. Materials, Parts, & Supplies Acquisition: The contractor shall responsible for individual parts up to $200.00. When a single part exceeds $200.00, the contractor shall be responsible only for the labor to install the parts. The cost of the part(s) shall be paid for by the government using a separate instrument in repairing the equipment to be maintained under this contract. Parts exceeding this amount shall be reported at once to the QA for approval at (202) 767-1090. The contractor shall purchase parts at the lowest price obtainable and secure reasonable competition for such purchases when available. All parts shall be genuine replacement parts as manufactured of as recommended by the manufacturer. All parts shall be U.L. approved/listed. Only new standard parts shall be used when effecting repairs. 3.2. WARRANTY. The contractor shall be responsible for replacing warranty items within the appropriate period of such warranty. This shall include manufacturers warranty. 3.3. CONTRACTOR EMPLOYEES. The contractor shall not employ person on this contract if such employee is identified to the contractor by the contracting officer as a potential threat to the health, safety, security, general well-being or operational mission of the installation and its population. 3.3.1. Contractor personnel shall present a neat appearance and be easily recognized as contractor employees. 4. GENERAL INFORMATION. 4.1. QUALITY ASSURANCE. The government will evaluate the contractor's performance under this contact. For task listed in the statement of work, the QA will inspect all services specified. When an observation indicates defective performance, the QA will notify the contractor manager of representative. The contractor shall ensure reperformance through his or her quality inspection system. 4.2. GOVERNMENT REMEDIES. The contracting officer shall follow the requirements of FAR 52.212-4, Contract Terms and Conditions for Commercial Items (May 1997), for contractor?s failure to correct nonconforming services. 4.3. HOURS OF OPERATION. The contractor shall maintain the following hours for testing, inspection and repair of required systems. 4.4. The contractor shall perform testing, inspection and repair in building 6000 after 4:00 PM, Monday through Friday or from 7:AM till 4:00 PM on Saturdays. For the remaining system inspections, the contractor's hours shall start at 4:30 AM until 8:00 PM, Monday Through Friday and continue inspections, testing or repairs until complete. 5. SECURITY REQUIREMENTS. All personnel employed by the contractor in the performance of this contract, or any representative of the contractor entering the installation, shall abide by all security regulations and instructions of the installation. 5.1. Base Access. The contractor shall obtain personnel identification passes for all employees and vehicle passes for all contractor and personal vehicles entering Bolling AFB. The contractor shall complete AF Form 75, Request for Visitor/Vehicle Pass, and DD Form 1172, Application for Uniformed Services Identification Card, and submit through the contracting officer and 11th Security Forces pass and registration. Vehicle registration, proof of insurance and a valid drivers license must be presented for all vehicles registered. 6.CONSERVATION OF UTILITIES. The contractor shall make sure employees practice utilities conversation. The contractor shall be responsible for working under conditions that prevent the waste of utilities to include: 6.1. Lights shall be used only in areas where work is actually being performed. 6.2. Employees shall not adjust mechanical equipment for heating, ventilation or air conditioning systems. 6.3. Water faucets or valves shall be turned off when not in use. FAR PROVISIONS: The provisions at 52.212-1, Instructions to Offerors-Commercial Items and 52.212-3, Offerors Representation and Certifications-Commercial Items are hereby incorporated. Addendum to FAR Clause 52.212-1 applies to this acquisition is as follow: 52.237-1, 52.252-1, 52.252-5: (b) DFARS (Chapter 2), 252.212-7000 and 252.225-7000. Add paragraph (l), ?Offeror must include, with its offer, a completed copy of provision FAR 52.212-3 in full text.? Clause 52.212-2, Evaluation?Commercial Items applies to this solicitation, specifically the following criteria: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and price is determined most advantageous to the Government. FAR CLAUSES: The clause at 52.212-4, Contract Terms and Conditions-Commercial Items is hereby incorporated. Addendum to FAR Clause 52.212-4 applies to this acquisition, specifically the following cited clauses: 52.209-6, 52.219-6, 52.232-18, 52.237-2, 52.237-3, 52.242-15, 52.252-2, 52.252-6: (b) DFARS (Chapter 2), 52.253-1, 252.204-7003, 252.204-7004, 252.219-7011, 252.212-7001 (DEV), 252.225-7001, 252.225-7002, 252.225-7009, 252.243-7001 and 5352.242-9000. FAR Clause 52.212-5 (DEV), Contract Terms and Conditions Required to Implement Status of Executive Orders-Commercial Items apply to this acquisition, specifically, the following cited clauses: 52.203-3, 52.222-3, 52.222-21, 52.222-26, 52.222-35, 52.222.36, 52.222-37, 52.222-41, and 52.222-42: THIS IS FOR INFORMATION ONLY: IT IS NOT A WAGE DETERMINATION: Employee Class: Fire Extinguisher Repairer, Monetary Wage-Fringe Benefits: $14.94. The incorporated Wage Determination 1994-2103, dated August 22, 2002, revision 27 is applicable. The web site is http://www.ceals.usace.army.mil/. All responses must be received no later than 4:00 P.M. EST on 28 Sep 02 to 11th CON/LGCF, 110 Luke Ave, Bldg 5681, Bolling AFB, DC 20332 by mail or facsimile. An official authorized to bind your company shall sign the offer. To be eligible for an award, all contractors must be registered in the Central Contractor Registration (CCR). A contractor can contact the CCR by calling 1-888-227-2423 or e-mail at www.ccr2000.com. The FAR clauses web site is http://farsite.hill.af.mil or www.arnet.gov. Questions concerning this solicitation should be addressed to TSgt Susan T. Starks, Contract Specialist, Phone (202) 404-1215, FAX (202) 767-7897, E-mail to Susan.Starks@bolling.af.mil.
- Place of Performance
- Address: Bolling AFB DC
- Zip Code: 20332
- Zip Code: 20332
- Record
- SN00175560-W 20020927/020925214058 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |