MODIFICATION
U -- Electronic Shop Tools Training
- Notice Date
- 10/23/2002
- Notice Type
- Modification
- Contracting Office
- Department of the Air Force, Air Education and Training Command, Specialized Contracting Squadron, 2021 First Street West, Randolph AFB, TX, 78150-4302
- ZIP Code
- 78150-4302
- Solicitation Number
- Reference-Number-F41689-02-X-0712
- Response Due
- 11/15/2002
- Archive Date
- 11/30/2002
- Point of Contact
- Martha Giannotti, Contracting Specialist, Phone 210-652-3816, Fax 210-652-3629, - Jodie Carlson, Contract Specialist, Phone 210-652-6523, Fax 210-652-3629,
- E-Mail Address
-
martha.giannotti@randolph.af.mil, jodie.carlson@randolph.af.mil
- Description
- You are invited to submit a budgetary quotation under Request For Quotation number F41689-02-X-0712 to furnish training as outlined in the attached Performance Work Statement. This request is for informational planning purposes only and is important for establishment of a realistic cost estimate. The government does not intend to award a contract on the basis of this solicitation, or otherwise pay for the information solicited except as provided in subsection 31.205-18, bid and proposal (b&p) costs, of the federal acquisition regulation. Identify any factors that would affect the prices quoted, and specify equipment and technical data that would be needed to support training (inclusive of stock number, part number, noun description, T.O. numbers, description of manuals and software). Also, specify whether said items would be Contractor or Government furnished. For performance in overseas areas, please identify logistical and administrative support required for your instructors. Your quotation should arrive at the above address not later than COB, 25 Oct 02 and have a validity period of at least 180 days. This is the minimum time required for processing by HQ USAF and review by the customer country. PERFORMANCE WORK STATEMENT. 1. Scope. a. Training is required by the USAF in support of an Egyptian Air Force (EAF) foreign military sales program, Peace Vector VI. Proposed training will be Type 1 contractor training, procured by Air Education and Training Command (AETC) and presented under the auspices of Air Force Security Assistance Training Program. All instruction is to be in the English language and training will be conducted in Egypt. Operator and maintenance training will be for four EAF Non Commissioned Officer technicians on the list of shop tools provided below. 2. Technical Training. a. The contractor shall propose course content and duration of training. The training objective is to provide the EAF trainees with operator (how to use for intended purpose) and maintenance capability to maintain the tools/equipment in a serviceable condition. Technicians shall be provided knowledge and skills necessary to succeed as operators and maintainers of the below listed equipment. b. The contractor shall provide course outlines detailing major topics/assemblies and the hours required to train the EAF technicians. Training shall include combinations of formal classroom instruction and "hands-on" practical exercises so as to provide skill proficiency to perform tasks "unsupervised." Primary emphasis shall be "hands-on" practical experience. Training is desired after the tools/equipment has been delivered in Egypt (estimated after June 2003 timeframe). AFSAT will coordinate with the EAF and to contractor to determine the exact dates the training can be provided. Equipment/Tool List (Item & Part No.): Light Test, 583120; Kit, Terminal Radi0-TVW1963 TL, 570909; Tool set Electronics, 570933; Tester Continuity, 595964; SWE Electronics Tool Kit #2, 591577; Frequency Counter, 592481; SW Electronics Tool #001, 591626; Tool kit Field Electrician #1, 591026; Electronic Sernice Center 46241LD, 591571; Tester Transistor, 592475; Multimeter, DVM Survivor, BK 2860-A, 594624; Oscilloscope, Kenwood CS-4125,200MHZ, 574759; Oscilloscope Rotex 6510, 100 MHZ, 571934. Training Materials. Training materials can be in contractor format. All training materials used by the student during course presentation will be retained by the student. NOTE: Include Contractor Travel Cost. REFER ALL CALLS TO THE POCS NOTED ON THIS SOLICTIATION. ADDITIONAL INFORMATION CONCERNING ELECTRONIC TOOLS TRAINING REQUIREMENTS LISTED BELOW (02-x-0712) They are part numbers assigned by a Distributor (such as McMaster-Carr) which manufacturers none of the equipments. 1) Light test B-G p/n:583120 Mfg: IDEAL; P/N: 61-040 2) Radio Terminal Kit B-G p/n: 570909, This is a box of many different sizes of electrical wire terminals only. 3) Electronics Tool Set B-G p/n: 570933 This is Snap-on tool kit E37which consists of 17 common hand tools only. No electronic tools. 4) Continuity tester B-G p/n: 595964 Mfg: IDEAL; P/N: 61-030 5) SWE Electronics Tool Kit B-G p/n: 591577 This is Snap-on tool kit E43 consisting of the following: B+K PRECISION (a) P/N: 1623, Power Supply, 0-60V/0-5A; (b) P/N: 1715 Power Supply, 0-60V/0-2A (c) P/N: 1735, Power Supply, 0-30V/0-3A (d)P/N: 1743, Power Supply, 0-35V/0-6A, (e) P/N: 2831C Digital Volt Meter (f)P/N: 2860A Digital Volt Meter (g) P/N: 4017A, 20MHZ Generator (h) P/N: 510A,Transister Tester (i) P/N: DP21, Logic Probe (j)P/N: PR46A X10 Frequency Counter Probe (k) FLUKE, P/N: 175,Multimeter (l)PROTEK, P/N: 741-0001 Model 6510 Oscilloscope (m)KENWOOD P/N: CS-4125 Oscilloscope (n) EMCO P/N: SS-1 Sine/Square Wave Signal Generator (o) Vector P/N: WC-412B Decade Box 6) Frequence Counter B-G p/n: 592481 Mfg: B+K PRECISION; P/N: PR46A 7) Electronics Tool Kit #001 B-G p/n: 591626 This is Snap-on Tool Kit E26 consisting of common hand tools and the following electronic equipment: Solder Station MBT-201AE; Mfg: PACE; P/N: 8007-0201 8) #1 Electrician Field Tool Kit B-G p/n: 591026 This is Snap-on Tool Kit E38 consisting of only common hand tools 9) Electronic Service Center B-G p/n: 591571 Mfg: PACE; P/N: 8007-0201 10) Transister Tester B-G p/n: 592475 Mfg: B+K PRECISION; P/N: 510A 11) Multimeter B-G p/n: 594624 Mfg: B+K PRECISION; P/N: 2860A 12) Oscilloscope B-G p/n: 574759 Mfg: KENWOOD; P/N: CS-4125 13) Oscilloscope B-G p/n: 571934 Mfg: PROTEX; P/N: 741-0001
- Record
- SN00192475-W 20021025/021023213336 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |