SOLICITATION NOTICE
35 -- Repair Horizontal Machining Center
- Notice Date
- 10/25/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker AFB OC-ALC - (Base Contracting), OC-ALC/PKO 7858 5th Street Ste 1, Tinker AFB, OK, 73145-9106
- ZIP Code
- 73145-9106
- Solicitation Number
- Reference-Number-F7MADW22470101
- Archive Date
- 11/16/2002
- Point of Contact
- Bettye Brown, Contract Negotiator, Phone (405) 739-4286, Fax (405) 739-7422, - Bettye Brown, Contract Negotiator, Phone (405) 739-4286, Fax (405) 739-7422,
- E-Mail Address
-
bettye.brown@tinker.af.mil, bettye.brown@tinker.af.mil
- Description
- Presolicitation Notice Worksheet Federal Business Opportunities 1. Send to CBD: Yes 2. Classification Code: Supply: _______ (First two digits of NSN) Services: _J___ CLASS DESIGNATOR CODE 3. Title: REPAIR SUNDSTRAND HORIZONTAL MACHINING CENTER 4. Response date (MM/DD/YYYY): 11/01/2002, 12:00 PM Central 5. Primary Point of Contact: Bettye Brown (405)739-4286 6. Solicitation Number: 7. Reference Number: F7MADW2247-0100 Description: This is a combined Solicitation/Synopsis in accordance with Federal Acquisition Regulation (FAR), Part 12, Commercial Practices. Services Non-Personal: The Contractor shall provide all labor, tools, parts, materials, equipment, transportation, and any other incidentals necessary to perform a one-time repair on Sundstrand Horizontal Machining Center, located in Bldg 3001, Post W-104, Tinker AFB OK. Work is to be performed in accordance with manufacturer?s specifications and the attached Statement of Work and Appendix C. A Firm-Fixed Price contract is contemplated IAW FAR, Part 12. One award will be made under this solicitation. Award will be based on initial response(s). However, the Government reserves the right to enter into an exchange with a contractor for the purpose of clarifications of a response. The resultant single award will be made to the offeror who is deemed responsible in accordance with the Federal Acquisition Regulation (FAR) Part 9, as supplemented, whose proposal conforms to the solicitations requirements. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether future procurements will be competitive. Point of contact is Bettye Brown, 405-739-4286, FAX 405-739-7422, or email at Bettye.Brown@tinker.af.mil. Anticipated award date is 08 Nov 02. All quotes must be submitted by 01 Nov 2002, 12:00 PM Central Time. Late proposals WILL NOT be considered for award. STATEMENT OF WORK FOR SUNDSTRAND SERIES 60 HORIZONTAL MACHINING CENTER 1. DESCRIPTION OF SERVICES. 1.1. The contractor shall provide all labor, materials, tools, test equipment, parts, transportation and other incidentals necessary to travel to Tinker AFB, OK to repair Sundstrand Series 60 Horizontal Machining Center to a satisfactory operational condition in accordance with manufacturer's specifications and this Statement of Work (SOW). Repairs shall be performed at Bldg 3001, Post W104, Tinker AFB, OK. 1.2. Known problem(s). ?B Axis? is unstable. 1.3. Equipment List: DESCRIPTION MODEL NUMBER SERIAL NUMBER Sundstrand Series 60 Horizontal Machining Center S-60 60-152 2. SERVICE DELIVERY SUMMARY. 2.1. Performance objective. The purpose of this purchase order is to repair the Sundstrand Series 60 Horizontal Machining Center to ensure optimal performance IAW manufacturer?s specification. 2.2. Schedule. The services shall be completed within four (4) weeks, or the earliest possible date after contract award. 2.3. Service Report. The contractor shall provide a service report at the completion of the contract to the Contract Monitor. The following minimum information shall be included: Name of Company, Service Date, Service Performed, Additional Service Needed (if any), Name of Technician and Completion Date. 3. GOVERNMENT-FURNISHED PROPERTY AND SERVICES. 3.1. The government shall provide access to the equipment, existing work space around the equipment, and existing utilities in the immediate work area. 3.2. The government shall provide a fork lift for use of heavy lifting during repairs of the Sundstrand Horizontal Machining Center. 3.3. The government shall provide two (2) mechanical maintenance persons to assist contractor during repairs of the Sundstrand Horizontal Machining Center. 4. GENERAL INFORMATION. 4.1. Quality. The contractor shall comply with all standard industry practices and procedures and manufacturer's specifications. 4.2. Hours of Operation. The contractor shall perform services Monday through Friday, 8:00 AM until 3:00 PM, excluding Federal Holidays, unless otherwise directed by the Contracting Officer. 4.3. Safety. In performance of this SOW, the contractor shall comply with all standard safety practices and all safety practices posted in the assigned work area and the attached Appendix C, provided by the Safety Office. 4.4. Tool Control. While performing contract services in or around Maintenance Production Shop areas at Tinker AFB OK, the Contractor shall comply with the intent of Tinker AFB?s Tool Control Program. 4.4.1. As a minimum, the Contractor shall maintain a tool inventory checklist of all tools taken to the work site on Tinker AFB OK. 4.4.2. The Contractor shall account for every tool on their tool inventory checklist at the beginning and end of each day they are working on site at Tinker AFB OK and at the end of each job. 4.4.3. The Contractor shall secure all tools located at the work site when the Contractor is not in the immediate area. No tools shall be left unattended/unsecured at any time. 4.4.4. The Contractor shall make the tool inventory checklist and tools available for random inspection by authorized government representatives. 4.5. FOD Prevention. While performing contract services at Tinker AFB OK, the Contractor shall comply with the intent of Tinker AFB?s Foreign Object Damage and Prevention Program. 4.5.1. As a minimum, the Contractor shall practice good housekeeping at all times in all areas, ensure all tools, equipment, and hardware are accounted for at the end of each task, remove watches, rings, chains, and other jewelry that could be dropped or become loose in FOD critical areas and practice good work habits. 4.5.2. The designated government representative will brief FOD awareness and prevention to the Contractor prior to the Contractor starting work in FOD critical areas. VENDOR CODE:___________________________________________________ DUNS NUMBER:____________________________________________________ COMPANY NAME:___________________________________________________ ADDRESS:__________________________________________________________ POINT OF CONTACT:_______________________________________________ TELEPHONE:_______________________________________________________ FAX:_______________________________________________________________ EMAIL:_____________________________________________________________ REMITTANCE ADDRESS:____________________________________________ WARRANTY TERMS: :____________________________________________ FOB POINT: DESTINATION, TINKER AFB 52.212-1 Instructions to Offers (Commercial) The following is provided for information only DOL 23530 Machinery Maintenance Mechanic 2 Each SIGNATURE OF OFFEROR TITLE It should be noted that all contractors are required to be registered in the DoD Central Contractor Registration (CCR) Database prior to award. Contractors can obtain additional information by calling 1-888-227-2423 or may register electronically at http://www.ccr2000.com/. North American Industry Classification System (NAICS): 811310 8. Place of Contract Performance (Address/City/State): Tinker Air Force Base, Oklahoma City, Oklahoma 9. Postal Code : 73145-7106 10. Country: USA 11. SetAside: N/A a) Partial Small Business b) Partial HBCU c) Total Women-owned Business d) Total HUB-Zone e) Total Small Disadvantaged Business f) Total Small Business g) Total HBCU h) Partial Women-owned Business i) N/A j) Partial HUB-Zone k) Partial Small Disadvantaged Business 12. Archiving Policy: A a) Automatic, 15 days after response date b) Automatic, on specified date ? Month ___ Day ___ Year ___ (Use this option if you will be awarding later than 15 days after the solicitation closes and allow yourself enough time for award. Example: Solicitation closes 15 Aug 01, you anticipate award 30 Aug 01, enter archive date of 15 Sep 01.) c) Manual Archive - DO NOT USE THIS METHOD OF ARCHIVING. 13. Preview (Allows user to view the Internet version of synopsis) Save (DO NOT USE THIS OPTION) Post (USE THIS OPTION TO POST THE SYNOPSIS TO FEDBIZOPPS) Clear Form (Clears all information that has been input)
- Place of Performance
- Address: Tinker AFB OK
- Zip Code: 73145
- Country: USA
- Zip Code: 73145
- Record
- SN00194017-W 20021027/021025213336 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |