SOLICITATION NOTICE
47 -- Hose Assembly, Steam, 2 Inch
- Notice Date
- 10/25/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Supply Systems Command, FISC, Norfolk Naval Shipyard Annex, Building 1500 Code 530, 2nd Floor, Portsmouth, VA, 23709-5000
- ZIP Code
- 23709-5000
- Solicitation Number
- N00181-03-Q-0021
- Archive Date
- 11/16/2002
- Point of Contact
- Alfredia Rich-Murphy, Contract Specialist, Phone 757-396-8350, Fax 757-396-9895, - Kiera Rustay, Supervisory Contract Specialist, Phone 757-396-8376, Fax 757-396-8503,
- E-Mail Address
-
richmurphyap@nnsy.navy.mil, rustaykj@nnsy.navy.mil
- Description
- This is a combined synopsis/solicitation for the supply of commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; PROPOSALS ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. This solicitation number N00181-02-Q-0021 is issued as a request for quotation (RFQ). NAIC 332999 with a standard size of 500 employees. All deliverables shall be FOB Destination, NNSY, Portsmouth, VA 23709-5000. This is for a firm fixed price requirement for the following items: Hose Assembly, Steam, 2 inch, Qty: 150, ORDERING DATA: A. 2 inches inside diameter x 2.625 inches outside diameter x 25 feet long (+/-3 inch length tolerance prior to attachment of end fittings). B. Temperature rating to be 450 degrees Fahrenheit. C. Maximum operating pressure to be 250.0 pounds per square inch. D. Burst Test Pressure to be 2500.0 pounds per square inch. E. Inner conveying tube material to be either Butyl, Chlorobutyl, Bromobutyl, or Ethylene-Propylene-Diene-Terpolymer. F. Inside surface condition to be smooth. G. Outer covering environmental protection to be abrasion, ozone and steam resistant. H. First layer to be braided steel wire. I. Second layer to be molded rubber. J. Third layer to be braided steel wire. K. Outer layer to be molded rubber. L. Stainless steel liner to be 1.75 inches inside diameter x 0.015 inch thick. The metal liner shall be type 302, 304, 316, or 321 stainless steel. M. Stainless steel liner to be permanently/mechanically attached to hose end fittings. N. Each assembly to be coupled, male x female boss and spud with polymer seat. Male boss and polymer spud to be permanently assembled and ready for use. O. Each completed hose assembly shall be hydrostatically tested to 250 PSI and held for 30 minutes with zero leakage allowed. P. Supplier must provide written certification that hose assemblies (hose and fittings) have been hydrostatically tested at 250 PSI for 30 minutes with zero leaks and/or buldges. Q. At no cost to the Government, Norfolk Naval Shipyard reserves the right to request a sample assembly for testing and evaluation purposes from any or all offerors during the evaluation purposes from any or all offerors during the evaluation process. R. Each hose assembly shall be permanently marked with contract number and manufacturers name. NOTE: DUE TO UNRESOLVED TECHNICAL ISSUES, HOSE MANUFAC-TURED/SUPPLIED BY BOSTON CONCORDE WILL NOT BE CONSIDERED FOR AWARD EVALUATION AT THIS TIME. This solicitation document and incorporated provisions/clauses are those in effect through Federal Acquisition Circular 97-27. The following apply: FAR 52.212-1, 52.212-2, 52.212-3, 52.212-4, 52.212-5 (incorporating 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-19, 52.232-33, 52.232-36 as applicable;). ADDENDA: FAR 52.203-6, and 52.222-25; DFAR 252.212-7001 incorporating 52.203-3, 252.225-7001, IMPORTANT NOTICE: DFARS 252.204-7004 Required Central Contractor Registration (CCR) applies to all solicitations issued on/after 06/01/98. Please ensure compliance with this regulation when submitting your quote. CCR does not apply if Government Credit Card is acceptable. Call 1-888-227-2422 or visit the Internet at http://ccr2000.com for more information. This requirement will be utilizing Simplified Acquisition Procedures as set forth in FAR 13.3. All responses must include a completed copy of the certifications and representation set-forth in FAR 52.212-3. All offers shall be evaluated for price, technical acceptability, and adherence to the applicable clauses/provisions. Parties responding to this request for quotation may submit their quote in accordance with their standard commercial practices (e.g. company letterhead, quote form, etc) but must include the following 1) Complete mailing/remittance address (s); 2) Prompt payment discount; 3) Delivery Schedule; 4) Taxpayer ID#; 5) All completed certifications as required herein. All responses must be received by 1 November 2002; 4:00 PM, Local Time and shall reference solicitation no. N00181-03-Q-0021. Questions/responses relative to this solicitation may be faxed to (757)-396-9895 or 8503; mailed to: FISC Norfolk Naval Shipyard Annex, Attn: A. Rich-Murphy, Code 532.5C, Bldg. 1500, 2nd Floor, Portsmouth, VA 23709-5000; or e-mailed to: richmurphyap@nnsy.navy.mil. Text of clauses may be found at the following websites: www.arnet.gov/far; www.dtic.mil/dfars.
- Place of Performance
- Address: FISC NORFOLK NAVAL SHIPYARD ANNEX, BLDG 1500, CODE 532.5C, PORTSMOUTH, VA
- Zip Code: 23709-5000
- Country: US
- Zip Code: 23709-5000
- Record
- SN00194167-W 20021027/021025213512 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |