MODIFICATION
53 -- STUDS, CONTINUOUS THREADS
- Notice Date
- 11/4/2002
- Notice Type
- Modification
- Contracting Office
- Department of the Navy, Naval Supply Systems Command, FISC, Norfolk Naval Shipyard Annex, Building 1500 Code 530, 2nd Floor, Portsmouth, VA, 23709-5000
- ZIP Code
- 23709-5000
- Solicitation Number
- N00181-02-Q-0017
- Response Due
- 11/5/2002
- Archive Date
- 11/20/2002
- Point of Contact
- Alfredia Rich-Murphy, Contract Specialist, Phone 757-396-8350, Fax 757-396-9895,
- E-Mail Address
-
richmurphyap@nnsy.navy.mil
- Description
- This is a combined synopsis/solicitation for the supply of commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; PROPOSALS ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. This solicitation number N00181-02-Q-0017 is issued as a request for quotation (RFQ). NAIC 332722 with a standard size of 500 employees. All deliverables shall be FOB Destination, NNSY, Portsmouth, VA 23709-5000. This is for a firm fixed price requirement for the following items: NOTE: ORDERING DATA IS APPLICABLE TO ALL ITEM NUMBERS. ORDERING DATA: A. studs, bolts, hex cap screws, socket head cap screws and nuts: MIL-S-1222H, 21 Oct. 1986 and Amendment 3 dtd. 30 Sep 1994. B. Type IV, IAW QQ-N-286F, Grade 500, Annealed and aged hardened. C and D not required. E and F N/A. G. Size: See Item Number. H. N/A. I. Iaw Table 1 and Paragraph 3.9. J. Lot A. K. Level C. L. Certification Required, See Item Number. Item 0001. Stud, continuous thread, Qty: 20 each, G. Size: (1 inch) (8 UNC-2A) X 70.00 inch to 72.00 inch long, Right Hand Threads. L. Certification Required, Remarks: 1. Provide written verfication that the Chemical and Mechanical properties have been determined and are acceptable IAW Mil-S-1222H w/Amendment 3 dated 30 September 1994. Test Reports shall list actual values for all verified attributes and shall be traceable to the material by Heat, Batch or Lot Number. 2. Verification of Slow Strain Rate Test (SSRT) IAW QQ-N-286F is required. 3. Material shall be identifiable to Inco Alloys International. Item 0002. Stud, continuous thread, 20 each, G. Size: (5/8 inch) (11 UNC-2A) X 70.00 inch to 72.00 inch long, Right Hand Threads. L. Certification Required, Remarks: 1. Provide written verfication that the Chemical and Mechanical properties have been determined and are acceptable IAW Mil-S-1222H w/Amendment 3 dated 30 September 1994. Test Reports shall list actual values for all verified attributes and shall be traceable to the material by Heat, Batch or Lot Number. 2. Verification of Slow Strain Rate Test (SSRT) IAW QQ-N-286F is required. 3. Material shall be identifiable to Inco Alloys International. Item 0003. Stud, continuous thread, Qty: 50 each, G. Size: (3/4 inch) (10 UNC-2A) X 70.00 inch to 72.00 inch long, Right Hand Threads. L. Certification Required, Remarks: 1. Provide written verfication that the Chemical and Mechanical properties have been determined and are acceptable IAW Mil-S-1222H w/Amendment 3 dated 30 September 1994. Test Reports shall list actual values for all verified attributes and shall be traceable to the material by Heat, Batch or Lot Number. 2. Raw stock shall be manufactured by and traceable to Inco Alloys International, Inc. Traceability shall be accomplished via heat, lot, or batch number marked on the material and the test reports. Slow Strain Rate Tensile Test results to be included on the test reports. This solicitation document and incorporated provisions/clauses are those in effect through Federal Acquisition Circular 97-27. The following apply: FAR 52.212-1, 52.212-2, 52.212-3, 52.212-4, 52.212-5 (incorporating 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-19, 52.232-33, 52.232-36 as applicable;). ADDENDA: FAR 52.203-6, and 52.222-25; DFAR 252.212-7001 incorporating 52.203-3, 252.225-7001, IMPORTANT NOTICE: DFARS 252.204-7004 Required Central Contractor Registration (CCR) applies to all solicitations issued on/after 06/01/98. Please ensure compliance with this regulation when submitting your quote. CCR does not apply if Government Credit Card is acceptable. Call 1-888-227-2422 or visit the Internet at http://ccr2000.com for more information. This requirement will be utilizing Simplified Acquisition Procedures as set forth in FAR 13.3. All responses must include a completed copy of the certifications and representation set-forth in FAR 52.212-3. All offers shall be evaluated for price, technical acceptability, and adherence to the applicable clauses/provisions. Parties responding to this request for quotation may submit their quote in accordance with their standard commercial practices (e.g. company letterhead, quote form, etc) but must include the following 1) Complete mailing/remittance address (s); 2) Prompt payment discount; 3) Delivery Schedule; 4) Taxpayer ID#; 5) All completed certifications as required herein. All responses must be received by 31 October 2002; 4:00 PM, Local Time and shall reference solicitation no. N00181-03-Q-0017. Questions/responses relative to this solicitation may be faxed to (757)-396-9895 or 8503; mailed to: FISC Norfolk Naval Shipyard Annex, Attn: A. Rich-Murphy, Code 532.5C, Bldg. 1500, 2nd Floor, Portsmouth, VA 23709-5000; or e-mailed to: richmurphyap@nnsy.navy.mil. Text of clauses may be found at the following websites: www.arnet.gov/far; www.dtic.mil/dfars. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (04-NOV-2002). IT ACTUALLY FIRST APPEARED ON THE FEDBIZOPPS SYSTEM ON 12-NOV-2002. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Place of Performance
- Address: NORFOLK NAVAL SHIPYARD FISC ANNEX, BLDG 1500, CODE 532.5C, PORTSMOUTH, VA
- Zip Code: 23709
- Country: US
- Zip Code: 23709
- Record
- SN00203778-W 20021114/021112215121 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |