SOLICITATION NOTICE
48 -- VALVE,GLOBE
- Notice Date
- 11/16/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- DEFENSE SUPPLY CENTER COLUMBUS; MARITIME SOLICITATIONS/AWARDS P.O. BOX 16704; COLUMBUS, OH 43216; US
- ZIP Code
- 00000
- Solicitation Number
- SPE760-03-T-1453
- Archive Date
- 1/1/2003
- Point of Contact
- DALE E. LONEY, (614)692-3059
- E-Mail Address
-
Email your questions to DALE E. LONEY
(dale.loney@dscc.dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- VALVE, GLOBE, PRESSURE, INSTRUMENT. NOMINAL SIZE 1/4 INCH. SS BODY, STEM AND BONNENT, 6000 PSI INLINE VALVE. IAW MIL SPEC TITLED "VALVES, GLOBE PRESSURE INSTRUMENT, STEM TEST CONNECTION, UNION END", WITH THE FOLLOWING EXCEPTION: THE INLET CONNECTION ONLY SHALL BE A 1/4 INCH FEMALE TUBE FITTING IAW SAE J1926/1 ILO MS 16142C; OUTLET CONNECTION SHALL BE 1/4 INCH FLARELESS TUBE FITTING IAW MIL-F-18866; TEST CONNECTION SHALL BE 1/4 INCH FLARED FITTING IAW AS 4395 ILO MS 336556J CERTIFICATE OF QUALITY COMPLIANCE APPLIES - DLAR 52.246-9000 . DLAD CLAUSE 52.246-9004, PRODUCT VERIFICATION TESTING IS HEREBY INCORPORATED, AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. . CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN NATIONAL STANDARD FOR CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS, OR ISO 10012-1, QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT. IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE, HOWEVER, THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO; I.E., THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). MERCURY FREE - THE ITEM FURNISHED SHALL CONTAIN NO MERCURY OR MERCURY COMPOUNDS AND SHALL BE FREE FROM MERCURY CONTAMINATION IAW DCSC DWG. 16236 CS-4320-0442, BASIC DATE 16 JULY 87. "CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS." THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES FULL AND OPEN COMPETITION APPLY
- Place of Performance
- Address: SEE ADDITIONAL DELIVERY INFO; ; , AA 00000; US
- Zip Code: 00000
- Country: US
- Zip Code: 00000
- Record
- SN00206281-W 20021118/021116213030 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |