SOLICITATION NOTICE
66 -- CW OR PULSED LASER AND OPTICAL HETERODYNE SYSTEM
- Notice Date
- 12/2/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of Energy, Bechtel Nevada Corp (DOE Contractor), Bechtel Nevada, PO Box 98521, Las Vegas, NV, 89193
- ZIP Code
- 89193
- Solicitation Number
- Reference-Number-STL-0001
- Archive Date
- 12/20/2002
- Point of Contact
- Audwin Whitmore, Procurement Specialist, Phone 702.295.7608, Fax 702.295.2088, - Ralph Somers, Procurement Specialist, Phone 702.295.1743, Fax 702.295.2088,
- E-Mail Address
-
whitmoa@nv.doe.gov, somersrd@nv.doe.gov
- Small Business Set-Aside
- Total Small Business
- Description
- CW or pulsed (If pulsed, pulse width must be greater than 10 microseconds, with amplitude flat to +/- 3% over 90% of the width of the pulse) Wavelength: between 400 nm and 700 nm (shorter is better) Optical output power: 10 milliWatts or greater. There is a good chance that we will want about 100 milliWatts Relative Intensity Noise, RIN <-90 dB/Hz Intensity Noise, 10 Hz to 2 MHz: <0.1% RMS Single frequency Linewidth: less than 20 kHz per 100 milliseconds Frequency drift: 2 MegaHertz/minute maximum Frequency tunable over a minimum 20 GHz range via thermal or piezo control. External input for frequency control to allow two lasers to be frequency locked and produce an optical heterodyne signal at frequencies ranging from 100 MHz to 20 GHz Benchtop package, not requiring water cooling 2. Optical heterodyne system to generate an optical sine wave at frequencies variable from 1 MHz to 20 Ghz. The system would consist of two frequency tunable lasers along with the optics to combine the beams, a closed loop feedback circuit to monitor the optical output, and the electronic circuit to stabilize the output frequency at the desired frequency as referenced to a stable oscillator. CW or pulsed (If pulsed, pulse width must be greater than 10 microseconds, with amplitude flat to +/- 3% over 90% of the width of the pulse) Wavelength: between 400 nm and 700 nm (shorter is better) Optical output power: 10 milliWatts or greater. There is a good chance that we will want about 100 milliWatts. Heterodyne frequency: variable 100 MHz to 20 Ghz, accurate and stable to or 0.01% over a 1 hour period Benchtop package, not requiring water cooling Modulation depth: 98% or better 3. We would also be interested in a similar device operating at 266 nm or shorter wavelength. Some of the requirements could probably be relaxed if compromise is necessary to reach this wavelength.
- Place of Performance
- Address: BECHTEL, SPECIAL TECHNOLOGIES LABORATORY, SANTA BARBARA, CA
- Zip Code: 93111
- Country: US
- Zip Code: 93111
- Record
- SN00213844-W 20021204/021202213726 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |