SOLICITATION NOTICE
99 -- Horizontal Stroke
- Notice Date
- 12/11/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Mobility Command, 22 CONS, 53147 Kansas St Suite 102, McConnell AFB, KS, 67221-3606
- ZIP Code
- 67221-3606
- Solicitation Number
- F13C2623170200
- Response Due
- 12/27/2002
- Archive Date
- 1/11/2003
- Point of Contact
- Teresa Fox, Contract Specialist, Phone 316-759-4519, Fax 316-759-4507, - Sean Yates, Contract Specialist, Phone (316) 759-4523, Fax (316) 759-4507,
- E-Mail Address
-
teresa.fox@mcconnell.af.mil, sean.yates@mcconnell.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The Solicitation number is F13C2623170200. This solicitation is issued as a Request for Quote (RFQ). This RFQ incorporates provisions and clauses as those in effect through Federal Acquisition Circular Number 2001-09. This requirement is restricted to small businesses. Must bale newspaper, high-grade paper, magazines, steel cans, aluminum cans, plastic, corrugated cardboard, without fluffing or shredding. Bale Requirements: Size: 60?L x 30?H x 48?W Min, Magazine bale weight up to 2000 lbs at 40lb per cubic ft Min, Corrugated bale weight up to 1200 lbs at 20lb per cubic ft Min, PET bale weight up to 900 lbs at 16 lb per cubic ft Min, HDPE bale weight up to 1000 lbs at 20 lb per cubic ft Min, Steel can bale weight up to 1200 lbs at 22 lb per cubic ft Min, Office paper up to 1600 lbs, Newspaper up to 1500 lbs Horizontal Baler Requirements: 20 HP high efficiency 230-460 volts 3 phase motor with five-year manufacturer?s warranty, Directional valve to be high flow soft shift design, 105 gallon oil reservoir, filter to be 10-micron micro glass media, UL approved NEMA 12 rated controls, Feed opening: 35?L x 54?W Min, Cycle time of 29 seconds or less, Short stroke cycle time of 21 seconds or less, Bale chamber penetration within 4? of door, Four sided shear blade-reversible (Bolted in for ease of replacement), Hydraulic door, Baler unit to be 15?-3? long x 6?5? wide with weight of 14,000 lbs. Baler to have ?? thick steel floor plus ?? AR400 wear strips, 3/8? thick steel sidewalls, Baler to be shot blasted with primer coat and industrial grade alkyd enamel, Baler to be delivered complete with electrical disconnect and full oil reservoir with Mobil DTE hydraulic oil or oil which exceeds DTE specifications. Complete with anchor bolts, grease gun, lean out tool and one bundle bale tie wire. Baler to have self-oiling cylinder bushings, Micro logic 1000 Allen Bradely Programmable Controller. Feed Conveyor Requirements: Conveyor manufactured specifically for use with proposed baler, Conveyor constructed to be of formed structural steel sides of 3/16? steel thickness with 2? x 2? x ?? angle re-enforcement and ?? steel end sections for motor and pulley mounting, Three sided conveyor feed baler hopper extension for ease of loading large cardboard Door size 35? x 52?. Distance between conveyor sides of 48 ??. 48? wide 150 lb PVC 2 Ply belting with 3? vulcanized cleats on 48? centers. The following Federal Acquisition Regulations (FAR) provisions and clauses apply to this solicitation and are incorporated by reference: FAR 52.212-1, Instructions to Offerors ? Commercial Items; FAR 52.212-2, Evaluation ? Commercial Items; FAR 52.212-3, Offeror Representations and Certification ? Commercial Items; FAR 52.212-4, Contract Terms and Conditions ? Commercial Items; FAR 52.212-5, Contract Terms and Conditions Requires To Implement Statutes Or Executive Orders ? Commercial Items; the following clauses under paragraph (b) apply: (1) 52.203-6, (5) 52.219-8, (8) 52.219-23, (11) 52.222-21, (12) 52.222-26, (13) 52.222-35, (14) 52.222-36 , (15) 52.222-37, (16) 52.222-19, (20) 52.225-5, (21) 52.225-13, (23) 52.232-33 and (24) 52.232-33. DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items ? the following clause under paragraph (a) applies: 252.219-7003. DFARS 252.204-7004, Required Central Contractor Registration. All FAR clauses and provisions referenced may be reviewed and/or obtained from the General Services Administration?s Federal Acquisition Regulations website at Internet address http://farsite.hill.af.mil/. All responsible sources may submit a quotation that shall be considered by the Agency. Offers are required to be received by 27 December 02, 3:00 pm Central Standard Time, via e-mail to Sean.Yates@McConnell.af.mil faxed to (316) 759-4507 ATTN: A1C Teresa Fox, or addressed to ATTN: A1C Teresa Fox, 22nd Contracting Squadron, 53147 Kansas St, McConnell AFB, KS 63221-3606.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/AMC/22CONS/F13C2623170200/listing.html)
- Place of Performance
- Address: McConnell AFB KS
- Zip Code: 67221
- Country: USA
- Zip Code: 67221
- Record
- SN00221873-F 20021213/021211214014 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |