SOLICITATION NOTICE
66 -- Aircraft Scales Calibration Adapter Plate
- Notice Date
- 12/19/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFMETCAL, 813 Irving Wick Dr. W., Heath, OH, 43056-6116
- ZIP Code
- 43056-6116
- Solicitation Number
- F33660-03-Q-0007
- Response Due
- 1/10/2003
- Archive Date
- 1/25/2003
- Point of Contact
- Lisa Engle, Contract Specialist, Phone 740-788-5049, Fax 740-788-5157, - Glenna Pound, Contracting Officer (Location Admin), Phone 740-788-5043, Fax 740-788-5157,
- E-Mail Address
-
Lisa.Engle@Afmetcal.af.mil, glenna.pound@afmetcal.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- AFMETCAL Det 1, Heath, OH intends to award a purchase order under Simplified Acquisition Procedures (SAP) for the purchase of 17 each of Aircraft Scales Calibration Adapter Plate. This is a combined synopsis/solicitation for items prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. A written quotation will not be issued. All requests for written quotations SHALL be disregarded. It is the offeror?s responsibility to monitor this site for the release of amendments (if any). This solicitation number, F33660-03-Q-0007, is a Request for Quotation (RFQ). The North American Industry Classification System (NAICS) Code is 334515 and the business size standard is 500 employees. This solicitation is 100% SET ASIDE FOR SMALL BUSINESS CONCERNS in accordance with FAR Part 19. The Air Force Metrology and Calibration (AFMETCAL) program requires 17 each Aircraft Scales Calibration Adapter Plates. Scope: This purchase description describes a load adapter plate, which will be used to calibrate Intercomp AC30-60 Aircraft Weighing Scales. General Description: The calibration adapter plate is an aluminum plate with a hard rubber pad bonded to the bottom and a hardened steel plate attached to the top. The calibration adapter plate will be used with a Morehouse Instrument Co., Model 654000 Aircraft Scale Force Calibration Press and an Air Force-Force-Calibration Kit to calibrate Intercomp Model AC30-60 Aircraft Weighing Scales. The purpose of the calibration adapter plate is to evenly distribute the force applied to the top of the scales in the same manner a C-17 or F-15 aircraft would during weighing. Components: One Aircraft Scales Adapter Plate. Sub-Components: Consist of the following: Aluminum Load Distribution Plate: The load distribution plate shall be made from 2-inch thick tool and jig plate aluminum. It will be 12 inches x 18 inches. It will be recessed 5/8 inches x 11 inches x 17 inches to accept the rubber padding. Rubber Padding: The rubber padding shall be bonded to the recessed bottom of the aluminum plate. The pad will be 11 inches x 17 inches x ? inch. The hardness of the rubber shall be equal to the hardness of a large aircraft tire, or 375 P.S.I. Hardened Steel Plate: The plate will be attached on center to the top of the aluminum plate with (6) 3/8-16 socket-head cap screws on a 5-inch diameter bolt circle. The bolts shall be recessed below the surface. The plate shall be made of hardened steel, (Rc hardness 42-48). The plate will be 5/8-inch thick x 6-inch diameter. A locating hole, 0.751-0.753 in diameter, will be in the center of the plate. Lifting Handles: Two hinged handles will be attached to the top of the aluminum load plate. Construction: The equipment shall be designed and constructed of materials that meet the requirements of this specification and in accordance with the best commercial practices for industry approved equipment. It shall be designed and manufactured to maximize reliability, maintainability, accuracy of operation, and ease of operation. All parts shall be able to withstand the conditions met in shipping, storage, and service. Testing: The adapter plate will be checked for conformance to the requirements of this purchase description. It will also be tested with an aircraft scales and force kit. Items not meeting the requirements of this purchase description shall be rejected. Offerors shall submit technical drawings, and a product sample sufficient for the Government to make an adequate technical assessment, with their offer to the contract specialist. Awarded items are to be delivered to: (1 each to each location) ? AFMETCAL, OH, Andrews AFB, MD, Charleston AFB, SC, Columbus AFB, MS, Eglin AFB, FL, Elmendorf AFB, AK, Ellsworth AFB, SD, Forbes Field ANGB, KS, Hickman AFB, HI, Hill AFB, UT, Little Rock AFB, AR, McChord AFB, WA, McConnell AFB, KS, McGuire AFB, NJ, Nellis AFB, NV, Tinker AFB, OK, and Robins AFB, GA. Delivery shall be 90 days after receipt of award. The following clauses apply to this acquisition and are incorporated by reference: FAR 52.212-1, FAR 52.212-2, FAR 52.212-3, FAR 52.212-4, and FAR 52.212-5. Technical acceptability will be determined solely on the content and merit of the information submitted in response to this solicitation. The offer must: (1) be for the items described above; (2) be FOB destination; (3) include a delivery schedule and discount/payment terms; (4) be signed by an authorized representative of the company; (5) include a telephone number, and a facsimile number; (6) be registered in the CCR; (7) include their taxpayer identification number (TIN), DUNS number, and CAGE code. This will be a DO-A70 rated order. Offers are due by 10 January 2003, no later than 4:00pm EST to: Lisa Engle, AFMETCAL Det 1/MLK, 813 Irving Wick Drive West, Heath, OH 43056-6116. Facsimile submissions are permissible with the follow-up of an original sent by mail. Any offer or modification to an offer received after the exact time specified for receipt of offers will not be considered. All responsible sources may submit an offer, which shall be considered by this agency.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/AFMC/AFMETCAL/F33660-03-Q-0007/listing.html)
- Record
- SN00227576-F 20021221/021219214650 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |