SOLICITATION NOTICE
31 -- BEARING,BALL,ANNULAR
- Notice Date
- 12/27/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- DEFENSE SUPPLY CENTER RICHMOND (SP0405); SUPPLIER OPER-OEM DIVISION 8000 JEFFERSON DAVIS HIGHWAY; RICHMOND, VA 23297; US
- ZIP Code
- 00000
- Solicitation Number
- SPE405-03-T-0471
- Archive Date
- 2/12/2003
- Point of Contact
- GLENN A. POOLE, 804-279-2623
- E-Mail Address
-
Email your questions to GLENN A. POOLE
(glenn.poole@dscr.dla.mil)
- Small Business Set-Aside
- N/A
- Description
- BEARING,BALL,ANNULAR "CONFIGURATION CONTROL ITEM" BOEING HELICOPTERS CAGE 77272 P/N:423DS2701 REV C ORIGIN INSPECTION REQUIRED. DSCR DOES NOT CURRENTLY HAVE AN APPROVED TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN. PLEASE DO NOT SUBMIT REQUEST TO DSCR-VABA. CONFIGURATION CONTROL/ITEM APPROVAL BY DESIGN CONTROL ACTIVITY APPLIES. CONFIGURATION CONTROL: FURNISHED ITEM MUST CONFORM TOTALLY TO THE CITED REQUIREMENTS/OEM DRAWING REVISION AS MAY BE CITED IN ITEM DESCRIPTION. VARIATIONS MUST BE IDENTIFIED AND HANDLED IN ACCORDANCE WITH MIL-STD-973 DATED 17 APR 92 AND INTERIM NOTICE 3 DATED 13 JAN 95. MIL-STD-973 PARAGRAPHS 5.4.2, 5.4.3, 5.4.4, 5.4.6, 5.4.7, 5.4.8 APPLY. ITEM APPROVAL: OFFERORS, NOT CITED IN THE ITEM DESCRIPTION AND REQUESTING APPROVAL OF THEIR ITEM, MUST PROVIDE ALL TECHNICAL DATA, MANUFACTURING AND INSPECTION PROCESS SHEETS THAT WILL SHOW COMPLETE ITEM COMPLIANCE TO CITED REQUIREMENTS. OFFERORS REQUESTING APPROVAL OF THEIR ITEM BASED ON PREVIOUS MANUFACTURE OF PRODUCTION QUANTITIES OF SIMILAR ITEM(S) MUST ALSO SUBMIT THE FOLLOWING DOCUMENTATION: 1. COMPLETE TECHNICAL DATA PACKAGE OF SIMILAR ITEM(S) TO INCLUDE ALL ASSOCIATED DRAWINGS, INCLUDING RELEVANT PROCESS SPECIFICATIONS AND ACTUAL PROCESS SHEETS. 2. IDENTIFICATION OF MAJOR DIFFERENCES BETWEEN THE SIMILAR ITEM(S) AND APPROVED PART. 3. EVIDENCE OF TESTING CONDUCTED ON THE MATERIALS USED IN THE PRODUCTION OF THE SIMILAR ITEM(S) AND ASSURANCE MATERIALS ARE IN CONFORMANCE WITH REQUIRED SPECIFICATIONS OR STANDARDS. 4. DESCRIPTION OF VALUE ADDED BY AN OEM INCLUDING ANY FABRICATION, ON SITE INSPECTIONS, QUALITY ASSURANCE SURVEILLANCE OF SUBVENDORS, TOOLING, MANUFACTURING PROCESS SHEETS OR PROCESS DATA FOR USE IN FABRICATION OF THE SIMILAR ITEM(S). 5. EVIDENCE THAT THE OFFEROR WAS RESPONSIBLE FOR THE ENTIRE MANUFACTURING PROCESS OF THE SIMILAR ITEM(S). 6. EVIDENCE THAT THE ITEM WAS PRODUCED IN PRODUCTION QUANTITIES AND THE END ITEM(S) MET ALL REQUIREMENTS AND WERE ACCEPTABLE TO THE CUSTOMER, I.E. CONTRACT AND SHIPPING DOCUMENTS SHOWING PART NUMBER, STOCK NUMBER, QUANTITIES DELIVERED AND EVIDENCE OF ACCEPTANCE. 7. COMPARISON OF MANUFACTURING AND INSPECTION PROCESSES OF BOTH THE SIMILAR ITEM(S) AND ITEM BEING SOLICITED. THIS IS TO PROVIDE EVIDENCE THAT THE SIMILAR ITEM(S) ARE OF EQUAL OR GREATER COMPLEXITY AND DO INCLUDE THE FULL SCOPE OF ALL MANUFACTURING AND INSPECTION PROCESSES OF THE SOLICITED ITEM. 8. OFFEROR MAY BE REQUIRED, IN THE APPROVAL PROCESS, TO PROVIDE AT NO COST A SAMPLE OF SAME OR SIMILAR ITEM(S) FOR DESIGN CONTROL ACTIVITY EVALUATION. ITEM MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-130K DATED JANUARY 15, 2000. ...END OF SPECIAL INSTRUCTIONS... SEE PID DATA FOR TECH DATA PACKAGE (TDP) AVAILABILITY INFORMATION. IF TABLE A0648 IS CITED, THE OFFEROR IS REQUIRED TO PROVIDE COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION.
- Place of Performance
- Address: SEE ADDITIONAL DELIVERY INFO; ; , AA 00000; US
- Zip Code: 00000
- Country: US
- Zip Code: 00000
- Record
- SN00231435-W 20021229/021227213624 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |