SOLICITATION NOTICE
59 -- PRINTED WIRING BOARDS (PWB)
- Notice Date
- 10/21/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Weapons Division Dept.1, Commander, NAWCWD, Code 210000D, 1 Administration Circle, China Lake, CA, 93555-6100
- ZIP Code
- 93555-6100
- Solicitation Number
- N68936-03-R-0006
- Response Due
- 12/5/2002
- Point of Contact
- Margaret Keen, Contract Specialist, Phone (760) 939-4665, Fax (760) 939-4241, - Doreen Robbins, Procuring Contracting Officer, Phone (760) 939-9665, Fax (760) 939-4241,
- E-Mail Address
-
margaret.keen@navy.mil, doreen.robbins@navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- The Naval Air Warfare Center Weapons Division, China Lake, CA intends to procure prototype printed wiring boards for various development and test programs. The contract will encompass multiple product orders, verbal or electronic mail over a 3-year period. Payment will be made via Government Purchase Card on a monthly basis not to exceed $25,000 per month. Requirements: Contractors submitting offers should address the following requirements: Using Government-provided Gerber and drill files, the contractor shall manufacture printed wiring boards for the NAWCWPNS; Gerber, drill and net list files will be submitted via electronic mail and the contractor shall be capable of accepting those files; the contractor shall accept orders either verbally or via electronic mail, and proposals for individual orders shall be delivered to NAWCWPNS via electronic mail or telefax; prior experience with U. S. Government procurement is desired. Quantity: The contractor shall maintain a prototype PWB capability to meet NAWCWPNS prototyping needs. The minimum order quantity will be one PWB; there shall be no maximum order quantity. The contractor shall maintain the capability to produce multi-layer as well as single-sided and double-sided, rigid and flex PWBs. The manufacturing capability of PWB physical size shall include very small and large-size PWBs. Contractor processes shall be capable of employing mixed component technologies; both surface mount devices, including BGA (Ball Grid Array) and through-hole components and also producing PWB with micro via and fine line traces. Solder masking and silkscreen capability shall be available. The contractor shall have the capabilities to control and verify impedance of the PWBs. The contractor shall have the capability to provide bed of nails and net list testing and documents of the testing results. Delivery: The contractor shall be able to provide a PWB turnaround time of as little as 24 hours with next day delivery of the order. Quality Program: The contractor shall have a quality control process in-place to maintain the product quality. Although it is not required for every board, the contractor shall maintain a MIL-PRF-55110 quality program. Pricing: Pricing shall be via published catalog; a software catalog is acceptable if the catalog is releasable to NAWCWPNS. The pricing catalog should be based on the size and number of layers of the board, the number of holes per board, the type of boards and number of boards to be produced; a correction factor addressing delivery schedule should also be included. Other pricing factors included in the pricing schema should be noted separately. The anticipated award date is December 2002. The solicitation will be issued on or about 11 Nov 2002 and will be available through the 2.0 Contract Competency Homepage at: http://contracts.nawcwd.navy.mil/rfp-nawc.htm. All responsible sources will be considered by the agency. Some portions of the RFP are not available electronically. It is the offeror's responsibility to contact the Government Representative cited in the RFP (and listed below) in order to obtain paper copies of those portions of the RFP that are inavailable electronically. If you prefer to receive a hard copy or wish to be placed on the mailing list, please contact the Contract Specialist, Margaret Keen, in writing (or by fax: 760-939-8107 or by e-mail: margaret.keen@navy.mil The contract will be awarded on a competitive basis as a small business set aside. There will be multiple awards made from this announcement. The due date for receipt of proposals will be stated in the solicitation. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (21-OCT-2002). IT ACTUALLY FIRST APPEARED ON THE FEDBIZOPPS SYSTEM ON 23-JAN-2003. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DON/NAVAIR/N68936/N68936-03-R-0006/listing.html)
- Place of Performance
- Address: N/A
- Record
- SN00245963-F 20030125/030123220426 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |