SOLICITATION NOTICE
J -- DRYDOCK REPAIRS FOR THE USCGC SCIOTO
- Notice Date
- 1/24/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of Transportation, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- Reference-Number-DDWLR65504
- Archive Date
- 2/14/2003
- Point of Contact
- Sandra Martinez, Contract Specialist, Phone (757) 628-4591, Fax (757) 628-4676, - Marion Veber, Supervisory Contract Specialist, Phone 757-628-4633, Fax 757-628-4676,
- E-Mail Address
-
smartinez@mlca.uscg.mil, mveber@mlca.uscg.mil
- Description
- The U.S. Coast Guard is considering whether or not to set aside an acquisition for Hudzone concerns only. The estimated valve of this procurement is between $100,000.00 to $500,000.00. The NACIS code is 336611. The small business size standard is less than 1,000 employees. The acquisition is for dockside repairs to the USCGC SCIOTO 65 FOOT ?B? CLASS RIVER BUOY TENDER AND 100 FOOT BARGE. The vessel?s homeport is KEOKUK, IA. The vessel?s availability is for FORTY-TWO calendar days, starting June 3, 2003. The scope of this acquisition is for dockside repairs of various items aboard the USCGC SCIOTO (WLR 65504) The work will include, but is not limited to; welding repairs, remove and reinstall propeller shafts, fabricate shaft, renew water lubricate shaft bearings, renew shaft strut barrel, remove, inspect, and reinstall propeller, perform minor repair and reconditioning of propeller, clean and test grid coolers, remove, inspect and reinstall rudder assemblies, overhaul and renew valves, rebuild rudder stock, renew rudder lower bearing trunk, renew rudder upper bearing housing support, preserve spud and spud well on tender and barge, renew spud well liners, inspect deck fittings, preserve ballast tanks, preserve underwater body, renew draft figures, temporary messing and berthing, temporary logistics, routine drydocking, reinforce tender bow shell plating, renew MDE grid coolers, renew hatches and scuttles, and renew deck covering system. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. At the present time, the acquisition is expected to be issued under full and open competition procedures. However, in accordance with FAR 19.1305, if your firm is HUBZONE certified and intends to submit an offer on this acquisition, please respond by email to smartinez@mlca.uscg.mil or by fax (757) 628-4676. Questions may be referred to Ms. Sandra Martinez at (757) 628-4591. In your response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amount, points of contact, and telephone number(s); and (c) past performance references with points of contact and phone numbers. At least two references are requested, but more are desirable. Contractors are reminded that should this acquisition become a Hubzone set aside, FAR 52.219-3, Notice of Total Hubzone Set-aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employee of the concerns. Your response is required by January 30, 2003. All of the above must be made be submitted in sufficient detail for a decision to be made on a Hubzone set-aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a Hubzone small business set aside or on an unrestricted basis will be posted in the CBD.
- Record
- SN00246314-W 20030126/030124213847 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |