SOLICITATION NOTICE
29 -- Aug Fuel Control
- Notice Date
- 1/30/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- F34601-03-R-52805
- Archive Date
- 3/30/2003
- Point of Contact
- Mark Pritchard, Buyer, Phone 405-734-8756, Fax 405-734-8781, - Rob LaFollette, Contract Specialist, Phone (405) 734-8096, Fax (405) 739-5493,
- E-Mail Address
-
mark.pritchard@tinker.af.mil, robert.lafollette@tinker.af.mil
- Description
- 29--Presolicitation Notice Date Submitted: 30 Jan 03 OC-ALC/LPKPB DIR CONTRACTING/PROPULSION 3001 STAFF DR STE 2AE1/106C TINKER AIR FORCE BASE OK 73145-3032 Sources, Prime, Pratt & Whitney (Cage 77445/52661) and their Vendor Hamilton Standard (Cage 73030) who is the only approved source by Pratt & Whitney, This is a CEMS Tracked Item, Augmentor Fuel Control, SOL F34601-03-R-52805 DUE 15 Mar 03, Mark Pritchard/LPDPB/[405]734-8756, For additional information contact Rob LaFollette/LPDPB/[405]734-8096 Item 0001, 0002,NSN 2915-01-310-2141NZ,PR FD2030-03-52805 P/N: 4070290. Applicable to F100/229 Engines. The Augmentor Fuel Control is mounted under the engine 6:00 clock position of the rear fan duct. The purpose of the Augmentor Fuel Control is to control a proper flow of jet fuel for the afterburner spraybars over the full range of afterburner operation.. Dimensions: Approx. length 21 inches, approx. width 8.25 inches and approx. 12 inches high. Material: Predominantly Aluminum Alloy Low alloy Steel, and Stainless steel, QTY 3 ea. Destination: Tinker Air Force Base Ok 73145-3032 and/or other addresses sited in solicitation. Delivery: 31 Jan 04, 3 ea. Qualification requirements: CEMS Tracked Item, sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s)0001,0002. The approximate/issue response date will be 15 Apr 03. Written/electronic procedures will be used for this solicitation. To: Pratt & Whitney 400 Main St. Suite 1 East Hartford CT 06118-1888. No telephone requests. Hardcopies of the solicitation will not be mailed out from this office. The solicitation will be available for download on the release date from www.fedbizops.gov. All responsible sources may submit a bid, proposal, or quotation which shall be considered. Authority: 10 USC 2304(c)(1), Justification: Supplies (or Services) required are available form only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty-five days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the desertion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Drawing is available in an Air Force data file but is a source control drawing. Hamilton Standard is the only approved source by Pratt & Whitney Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. The anticipated award date will be 90 days after the issuance of this notice. See Note(s) 26. Point of Contact Mark Pritchard, Contract Negotiator, Phone (405) 734-8756, Fax (405) 734-8781, Email Robert.lafollette@tinker.af.mil Original Point of Contact Mark Pritchard, Buyer, Phone 405-739-4343, Fax 405-739-4452, Email mark.pritchard@tinker.af.mil - Rob LaFollette, Contract Specialist, Phone (405) 734-8096, Fax (405) 739-5493, Email robert.lafollette@tinker.af.mil
- Place of Performance
- Address: N/A
- Record
- SN00249642-W 20030201/030130213341 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |