SOLICITATION NOTICE
36 -- High Density Auger/Compactor and compatible matching associated equipment Roll-Off Containers, Tow Carts, Three Sided Tow Carts
- Notice Date
- 2/3/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, Naval Facilities Engineering Command, Contracts Office, Port Hueneme, 3502 Goodspeed Street, Suite 2 Building 41, Port Hueneme, CA, 92043-4306
- ZIP Code
- 92043-4306
- Solicitation Number
- N47408-03-T-0415
- Response Due
- 2/18/2003
- Point of Contact
- Kris Slaton, Contracting Officer, Phone 805-982-5056, Fax 805-982-4540, - Terry Moore, Contracting Officer, Phone 805-982-2479, Fax 805-982-4540,
- E-Mail Address
-
SlatonKE@cbchue.navfac.navy.mil, MooreTL@cbchue.navfac.navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This procurement is for High Density Auger/Compactor and compatible matching associated equipment Roll-Off Containers, Tow Carts, Three Sided Tow Carts. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitute the only solicitation; proposals are being requested and a written solicitation will not be issued. N47408-03-T-0415 is issued as a request for quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 97.19 and issued in accordance with FAR 13.5. This procurement is set-aside for Small Business; NAICS Code is 333999 and the small business standard is 500 or less employees. Delivery will be F.O.B. Origin to Naval Station Everett Washington 98207-5001. CLIN 0001: QUANTITY (1 EACH); DESCRIPTION: High Density Stationary Auger Style Compactor with a minimum of 15 HP, Sani-Tech Systems Model No. ST1540/30 or equivalent, a stationary (liquid tight auger chamber) style compactor that pre-crushes all large and bulky refuse and a discharge tube that is sealed with Neoprene or equivalent gasket before sending it to a receiver bin (roll-off container) with a minimum dimensions of 6 feet 1 inch long x 5 feet 4 inches wide x four feet 7 inches height (not including hopper and receiver bin); approximate weight of 5,000 lbs. A removable drive cover for safety and easy maintenance access. Forward and reverse motion capabilities. An adjustable cycle timer for automatic compaction; An auger with the following characteristics: Long life abrasion resistant alloy steel auger, 9 revolution per minute speed, with tapered diameter of 40 inches to 30 inches. A continuous feed capability and a self-lubricating bearing with redundant electric lubrication system, a 270,000 in. lbs. Auger torque. Two replaceable welded steel end wear plates for the charge chamber. An electro-mechanical gear reduction drive system with a minimum 9 inch penetration into the receiver bin for maximum compaction and liquid tight operation. An electrical specification as follows: a bin near Full Indicator light; an adjustable Compaction Density Control; a Three-Phase, 240 Volt Electric Motor; a l5 HP all Electric Drive System (No Hydraulics); an adjustable Running Time with Automatic Shut off; a UL Listed Control Panel; and a Key Lock Start (timed)/Reverse (Jog) control and Mushroom Stop Switches. This item shall have a standard Tan enamel finish. CLIN 0002: QUANTITY (2 EACH) DESCRIPTION: a minimum 47 cubic yard Roll-Off Containers, constructed of high quality materials, designed to mate with the Auger/Compactor for use in a wide range of outdoor and indoor settings, exterior shall have a base coat of primer and a topcoat of Tan paint, continuous weld on all seams (Inside and Out). CLIN 0003: QUANTITY (45 EACH) DESCRIPTION: Tow Carts, a minimum 3 cubic yard capacity, constructed of high quality materials (minimum 12 gauge steel bottoms and a minimum of 8 inch diameter pneumatic tires) and designed for use in a wide range of outdoor and indoor setting, each cart shall have 2 extra heavy-duty swivel rigs, 2 rigid rigs, a tow bar and a tow hitch, and a plastic lid with lid props, a continuous weld on all seams (Inside and Out), exterior shall have a base coat of primer and a topcoat of Tan paint and the interior shall have a polyurethane coating so as to withstand Marine environment. CLIN 0004: QUANTITY (2 EACH) DESCRIPTION: Three Sided Tow Carts, a minimum 3 cubic yard. The nominal 3 cubic yard capacity 3-sided tow carts shall be constructed of high quality materials, and designed for use in a wide range of outdoor and indoor setting, exterior shall have a base coat of primer and a topcoat of Tan paint, a continuous weld on all seams (Inside and Out). CLIN 0005: QUANTITY (1 LOT) Freight Charges for units to Environmental Division N453 Naval Station Everett Washington 2000 W. Marine View Drive Everett, Washington. 98207-5001 Attention, Recycling/Solid Waste Program. The contractor shall provide complete on-site training and installation and should be included in total price of the High Density Stationary Compactor. The on-site training shall be coordinated with activity personnel, to ensure attendance availability. The contractor shall provide all training materials and instructional labor and included in the training are complete (Start-up, Operation, Emergency Shutdown, and Preventative Maintenance Training), training that shall be consistent with the manufacturers instructional operation and maintenance manuals, instructor shall be familiar with the operation and preventative maintenance of the equipment and prepared training agenda. The contractor shall include manufacturers warranty for ?High Density Stationary Compactor? of one (1) Year for Parts and Labor commencing after the complete installation. Also, shall include Operations Manuals for ?High Density Stationary Compactor? System of three (3 sets) and ship to the following address: Two (2) Complete Sets of Operation Manuals with the equipment to the address stated in CLIN 0005 above and one (1) Operation Manuals to Naval Facilities Engineering Service Center (NFESC), Pollution-Prevention/In-Service Engineering Support Program, Code 422, Building 1100 23rd Avenue, Port Hueneme, CA 93043. Required delivery date specified site is 30 May 2003. Offerors are required to submit catalog cut sheets, technical data or other written material specifications for all items proposed to be furnished. FAR Provisions 52.212-1 and 52.212-2, Evaluation-Commercial Items applies. Evaluation criteria will be Lowest priced technically acceptable item. Additionally, vendor having manufactured equipment of this type for the specified application for a minimum of 5-years, technical merit, and cost. Offerors are to include a completed copy of FAR Provision 52.212-3, Offeror Representations and Certifications-Commercial Items, with its offer. FAR Clause 52.212-4 Contract Terms and Conditions-Commercial Items, applies as well as FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. The following FAR clauses cited in 52.212-5 apply: 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-1, 52.225-13 and 52.232-33. The Request for Quotation (RFQ) number is N47408-03-T-0415. Quotes are due NLT Febuary 19, 2003, 2:00 p.m. (PST). Submit quotes to Naval Facilities Institute, NAVFACCO Code NF20, Attn: Maria Nailat, 3502 Goodspeed St., Ste. 2, Port Hueneme, CA 93043-4337. Refer any questions to POC info below.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DON/NAVFAC/N47408/N47408-03-T-0415/listing.html)
- Place of Performance
- Address: Contractor's facility
- Zip Code: TBD
- Country: US
- Zip Code: TBD
- Record
- SN00252529-F 20030205/030203221036 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |