MODIFICATION
J -- Repair F108 High Pressure Turbine Nozzle Assembly Module #10
- Notice Date
- 11/5/2002
- Notice Type
- Modification
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- F34601-02-R-49049
- Response Due
- 12/20/2002
- Point of Contact
- Billie Kindschuh, Contract Negotiator, Phone (405)739-7580, Fax null, - Leslie Jones, Contract+Negotiator, Phone (405) 739-5495, Fax (405) 739-4237,
- E-Mail Address
-
billie.kindschuh@tinker.af.mil, leslie.jones@tinker.af.mil
- Description
- This synopsis is changed to delete Snecma Services as a source; add Chromalloy Components Services Inc, San Antonio TX as a source and replace the Input/Output NSN?s and P/N?s as follows: Input NSN 2840-01-153-8626PN, P/N 9995M14G01/G06 and/or NSN 2840-01-253-1391PN, P/N 9995M14G05/06/08 and/or 2840-01-243-2541PN, P/N 9995M14G11 and/or 2840-NC-F18-0765PN, P/N 9995M14G15; Output NSN 2840-NC-F18-0765PN, P/N 9995M14G15. Additionally, the primary point of contact has been changed to Billie Kindschuh. The estimated issue date is 20 Nov 02 and the estimated due date is 20 Dec 02. REPAIR F108 HIGH PRESSURE TURBINE (HPT) NOZZLE ASSEMBLY ? MODULE #10 SOL F34601-02-R-49049, OC-ALC/LPDPA TINKER AFB OK 73145-3032, For additional information contact Leslie Jones/LPDPA/ [405] 739-5495 Item 0001 Input NSN 2840-01-153-8686PN, P/N: 9995M14G01/G06 and/or NSN 2840-01-247-6295PN, P/N 9995M14G05/G07/G08 and/or NSN 2840-01-243-2541PN, P/N 9995M14G04/G11, Output NSN 2840-01-243-2541PN, P/N 9995M14G11, Repair F108 HPT Turbine Nozzle Assy ? Module #10. Anticipate award of a one-year Requirements type contract with 4 one-year options. Best Estimated Quantities (BEQ?s) are: Basic ? 9 each; Option I ? 24 each; Option II- 25 each; Option III ? 25 each; Option IV ? 25 each. Applicable to: CFM 56-2B/F108-100, 200 and 201 engines; KC-135R aircraft. Destn: Tinker Air Force Base Ok 73145. Repair consists of rework/repair HPT Nozzle Assembly, clean, inspect, replace the vane airfoils and outer bands with DSR-142 material, and repair other assembly components as required to output HPT Nozzle assembly as P/N 9995M14G11. Item Description: HPT Nozzle Assembly is a single stage air-cooled assembly that mounts in the combustion gas and directs the gas flow into the blades of the HPT rotor. The dimensions are approx. 32.215 inches in diameter and 1.638 in height. Delivery: Item 0001: Induct a maximum of 2 each per week with delivery 45 days after induction of reparable. Qualification requirements: Sources must be qualified prior to being considered for award. These qualification requirements apply to line item(s) 0001. Approved Source: GE Engine Services, Cincinnati OH 45215. The approximate issue date is 24 May 2002. The approximate response date is 24 JUN 2002. The anticipated award date will be 6 AUG 2002. Electronic procedures will be used for this solicitation through FedBizOps at http://www.eps.gov/. All responsible sources solicited may submit a bid, proposal, or quotation that shall be considered. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. Contact OC-ALC/BC, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009 for further information concerning qualification requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for Written Quotation will be posted to FedBizOps. See Note (s) 23. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (05-NOV-2002). IT ACTUALLY FIRST APPEARED ON THE FEDBIZOPPS SYSTEM ON 20-FEB-2003. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/AFMC/OCALCCC/F34601-02-R-49049/listing.html)
- Place of Performance
- Address: UNKNOWN
- Record
- SN00262656-F 20030222/030220220000 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |