SOLICITATION NOTICE
36 -- Trailer Mounted Brass Ordinance Shell Deformer
- Notice Date
- 3/24/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, Naval Facilities Engineering Command, Contracts Office, Port Hueneme, 3502 Goodspeed Street, Suite 2 Building 41, Port Hueneme, CA, 92043-4306
- ZIP Code
- 92043-4306
- Solicitation Number
- Reference-Number-N6921803RC00264
- Point of Contact
- Maria Nailat, Contract Specialist, Phone 805-982-5092, Fax 805-982-4540,
- E-Mail Address
-
NailatMC@cbchue.navfac.navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This procurement is for one (1) Trailer Mounted Brass Ordinance Shell Deformer. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitute the only solicitation; proposals are being requested and a written solicitation will not be issued. N6921803RC00264 is issued as a request for quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 97.19 and issued in accordance with FAR 13.5. This procurement is set-aside for Small Business; NAICS Code is 333319 and the small business standard is 500 or less employees. Delivery will be F.O.B. Origin to UIC N62604, Commanding Officer, Naval Construction Battalion Center, 2401 Upper Nixon Ave. Warehouse 320, Gulfport, MS 39501-5001, CLIN 0001: quantity (1 EACH); DESCRIPTION: Trailer Mounted Brass Ordinance Shell Deformer shall consist of the following dimensions: Height is equal or less than 11 feet, Width is equal or less than 8 feet, Length is equal or less than 24 feet, and Weight is less than 10,000 lbs. The Deforming Mechanism must deform by impact and not by process known as shredding/cutting. The Deformer?s specifications are as follows: Shell deforming capacity is equal or greater than 7000 lbs per hour, Power source requirements ? Diesel (tank large enough to run greater than 6 hrs without fill up), crusher motor is equal or greater than 7.5 HP, trailer mounted platform, must process up to size 50 caliber shells. The Deformer?s feature is electrical control panel. The deformer shall include the Start-up and Operating Personnel Training as follows: The contractor shall perform equipment start-up at the consignee?s facility within twenty (20) days after delivery of equipment. The contractor shall provide all labor and resource required for the start-up. Consignee?s facility shall supply a sufficient amount of material to be processed by the equipment to properly complete start operations. The operation of the equipment shall include modes and evolutions for which the equipment is intended to perform. The contractor shall verify that performance, controls, instrumentation and gauges indicate that the equipment is operating properly and within design parameters. The contractor shall provide the activity training for personnel at the receiving activity after start up of the equipment and within thirty (30) days of delivery of equipment. The contractor shall provide all labor and resources for the training. The consignee?s facility shall supply a sufficient amount of material to be processed by the equipment to properly complete training operations. The training shall include operation and preventative maintenance evolutions on the equipment and shall be consistent with instructions in the contractor?s operation and maintenance manual. The contractor?s instructor shall be expert in the operation and maintenance of the equipment and shall have a prepared training agenda. The contractor?s operation and maintenance manual shall be used as a training aid. The contractor shall provide a quantity of two (2) each Maintenance Manuals. CLIN 0002 quantity (1 Package), DESCRIPTION: The Deformer?s replacement parts package (High wear parts listed are dependent on Equipment make and model and normal wear and tear for typical 1 years usage) as follows: drive belt, Rotor blades/hammers, Deformer bearings, Slide, Various nuts and bolts. CLIN 0003, quantity (1 Lot), Freight Charges for unit as specified on CLIN 0001 be shipped to UIC N62604 Commanding Officer, Naval Construction Battalion Center, 2401 Upper Nixon Ave. Warehouse 320, Gulfport, MS 39501-5001, The warranty shall include a minimum of one year for parts and labor from the date of delivery, with exception of ordinary service maintenance parts. FAR Provisions 52.212-1 and 52.212-2, Evaluation-Commercial Items applies. Evaluation criteria will be Lowest priced technically acceptable item. Additionally, vendor having manufactured equipment of this type for the specified application for a minimum of 2 years. Offerors are to include a completed copy of FAR Provision 52.212-3, Offeror Representations and Certifications-Commercial Items, with its offer. FAR Clause 52.212-4 Contract Terms and Conditions-Commercial Items, applies as well as FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. The following FAR clauses cited in 52.212-5 apply: 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-1, 52.225-13 and 52.232-33. Clauses may be downloaded on the web site address, FAR www.arnet.gov/far and DFARS www.acq.osd.mil/dp/dars/dfars. Quotes are due NLT April 3, 2003, 2:00 p.m. (PST). Submit quotes to Naval Facilities Institute, NAVFACCO Code NF20, Attn: Maria Nailat, 3502 Goodspeed St., Ste. 2, Port Hueneme, CA 93043-4337.
- Place of Performance
- Address: Contractor's Facility
- Zip Code: TBD
- Country: US
- Zip Code: TBD
- Record
- SN00286436-W 20030326/030324213725 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |