Loren Data's SAM Daily™

FBO DAILY ISSUE OF MARCH 30, 2003 FBO #0485
SOLICITATION NOTICE

59 -- SUBJECT 59--Sources Sought for Half Page, Thermal paper for AN/TPQ-36/37

Notice Date

3/28/2003
 

Notice Type

Solicitation Notice
 

Contracting Office

US Army Communications-Electronics Command, CECOM Acquisition Center, ATTN: AMSEL-AC, Building 1208, Fort Monmouth, NJ 07703-5008
 

ZIP Code

07703-5008
 

Solicitation Number

MARKET-SURVEY-0098
 

Archive Date

6/9/2003
 

Point of Contact

Terry Traino, (732) 532-8867
 

E-Mail Address

Email your questions to US Army Communications-Electronics Command, CECOM Acquisition Center
(Theresa.K.Traino@us.army.mil)
 

Small Business Set-Aside

N/A
 

Description

NA CONTACT Sei Leung, Electronics Engineers or Roland Chan, Electronics Engineer, 732 532-9855 or 532-0350 respectively. This is a Market Survey to locate additional sources for Half page, Thermal paper, NSN 7530-01-488-4550 for AN-TPQ-36-37 Firefinder Radar System. The current sources are RITEC and Liberty Paper Company. The requirements for the NSN 7530-01-488-4550 as the followings: A. Physical Properties, paper Roll,RITEC part No. 9900455-001. Lightweight Thermal paper, Standard sensitivity; Durability: 5 years with avoidance of light, constant temperature of 18-25 deg C, 50+ - 10% Humidity; Paper Width: 4.00 inch; Paper length: 150 feet; Print surface: On outside of roll; End of rollmarker: Within 3 feet of the core, a minimum 4 foot long red end of roll t racer. B. Raw Material properties. Approved product: Kohler KT 55 F 18; Paper cliper: 60+ - 5 UM (2.4-2.6 mils, Test Method ISOO 536; Weight: 55 G/M square + - 5, Test Method ISO 534; Smoothness, BEKK, Front: 86%, Test Method ISO 5627; Tensile Strength: M D 40N/15MM, ISO 1924-2; CD 20N-15MM, ISO 1924-2; Prohibited sensitizer: Diphenoxy ethane, DPE; Materials within the paper composition shall not sublimate under any conditions of Temperature and Humidity. C. Physical properties. Paper core: RITEC part No. 9 900455-002; Inside diameter: 1.00 inch; Outside diameter: 1.25 inch; Material: Fiber. Potential Suppliers capable of providing this item must so indicate, by writing to Commander, USACECOM, ATTN: AMSEL-LC-IEW-C-CF, Building 1201E, Ft. Monmouth, NJ 07703-5 000. The response must include documentation such as test results, a vendor-subcontractor for this item or a statement from listed source demonstrating that the supplier can, in fact, successfully provide this item. Successful supplier(s) may be required t o warrant that the item supplied will satisfactorily perform when used for the purpose intended. For more information contact Sei Leung 732 532-9855 or Roland Chan 732 532-0350. The deadline for response is April 10, 2003. EMAIL ADDRESS: sei.leung@mail1. monmouth.army.mil or roland.chan@mail1.monmouth.army.mil.
 

Place of Performance

Address: US Army Communications-Electronics Command, CECOM Acquisition Center ATTN: AMSEL-AC, Building 1208 Fort Monmouth NJ

Zip Code: 07703-5008

Country: US
 

Record

SN00290478-W 20030330/030328213701 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |