Loren Data's SAM Daily™

FBO DAILY ISSUE OF MAY 02, 2003 FBO #0519
SOURCES SOUGHT

34 -- Maintenance on Ingersoll Mastercenter Gantry Machining Center

Notice Date

4/30/2003
 

Notice Type

Sources Sought
 

Contracting Office

TACOM - Anniston, Directorate of Contracting, ATTN: AMSTA-AN-CT, Building 221, 7 Frankford Avenue, Anniston, AL 36201-4199
 

ZIP Code

36201-4199
 

Solicitation Number

DAAE24-03-S-0005
 

Archive Date

7/14/2003
 

Point of Contact

Rita Dingler, 256-235-6027
 

E-Mail Address

Email your questions to TACOM - Anniston, Directorate of Contracting
(dinglerr@anad.army.mil)
 

Small Business Set-Aside

N/A
 

Description

NA Anniston Army Depot is seeking companies capable of providing unlimited on-call emergency repairs and annual inspection/alignment for a Government owned, custom built, fixed rail, vertical single spindle, Ingersoll Mastercenter Gantry Machining Center (60 feet long). Machine is equipped with the following Auxiliary Spindle Units: Nutator Part No. 990-3901-19, Grooving Attachment Part No. 26933-43-690-9, Heavy Duty Vertical, Part No. 990-3895-19, Extended Horizontal, Part No. 990-3907-19, 1400mm Extension, Part No. 990-3902-19, and Double Right Angle, Part No. 990-5009-19. Machine control is a GE Fanuc 15MB with a high-speed serial bus connected to a PC. Emergency repairs shall be performed by contractor personnel that are experienced and knowledgeable in all phases of repair, service, and operations of the machining center. Emergency repairs shall consist of any work that is necessary to restore the equipment to a 100% performance level. The contractor must be able to provide high priority repairs for t he Machining Center. Contractor shall respond to the Government's request for technical support within twenty-four (24) clock hours after notification that services are needed. On-site response shall be within seventy-two (72) hours after notification th at services are required. Alignment shall consist of the following: level runways, check runway parallelism, check machine squareness, laser align all axes, check head tracking, check spindle unit offsets/sweeps, machine inspection, and make all required software changes and document these changes. The contractor shall make all reasonable effort to align and adjust the Machining Center within the original machine design specifications. Interested companies are requested to provide brochures, literature, published prices lists, POC?s for similar type repair work not later than 15 days after synopsis appears in the CBD. Information must be submitted electronically. Information may be faxed to 256-235-4618 or sent to Rita Dingler at dinglerr@anad.army.mi l. THIS IS A SOURCES SOUGHT SYNOPSIS ? DO NOT REQUEST SOLICITATION
 

Place of Performance

Address: TACOM - Anniston, Directorate of Contracting ATTN: AMSTA-AN-CT, Building 221, 7 Frankford Avenue Anniston AL

Zip Code: 36201-4199

Country: US
 

Record

SN00315156-W 20030502/030430213652 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |