SOURCES SOUGHT
99 -- FLOWLINER NON-DESTRUCTIVE EVALUATION (NDE)
- Notice Date
- 5/30/2003
- Notice Type
- Sources Sought
- Contracting Office
- United Space Alliance (USA), 600 Gemini Avenue, Houston, TX 77058
- ZIP Code
- 77058
- Solicitation Number
- RFI-USAFL-EJ-5-29-03
- Response Due
- 6/9/2003
- Archive Date
- 5/30/2004
- Point of Contact
- Francis V. carlos, Project Lead, Phone (281) 282-3163, Fax (281) 282-4096, Email francis.v.carlos@usahq.unitedspacealliance.com
- E-Mail Address
-
Email your questions to Francis V. carlos
(francis.v.carlos@usahq.unitedspacealliance.com)
- Description
- Purpose of Request for Information (RFI): United Space Alliance (USA), LLC, through its offices located in Cape Canaveral, Florida, is soliciting sources capable of providing the requirements described herein. This acquisition is in support of USA?s prime contract NAS9-20000 - Space Flight Operations Contract (SFOC) with the National Aeronautics and Space Administration (NASA). Technical Requirements Description: In conjunction with NASA, USA will be conducting a Feasibility Study to determine the optimum system design for a remotely controlled inspection system to conduct nondestructive material inspections on Space Shuttle Flight Hardware at the NASA Kennedy Space Center (KSC), Florida. The internal circumference of a 12 inch diameter steel line (0.050 inch wall thickness) needs to be inspected with volumetric nondestructive testing methods (possibly Eddy Current and/or Ultrasonic or other). A delivery device is required to transport the inspection equipment to the areas of interest. The delivery device could be a robotic rover, crawler or other system, must not be larger than approximately 4 - 5 inches in width and height, and must travel approximately 10 feet into the steel line. The steel line includes internal support structures that determine the maximum size of the system. The device also has to travel around the support structures and up/down at various angles. Due to the sensitivity of the hardware, strict requirements apply regarding the reliability of the device, the loads on the hardware, contamination of the hardware, export control and proprietary regulations, etc. Procurement Strategy: USA is responsible for the overall program management and integration of these technical requirements. USA will solicit the participation of qualified sources and sources desiring to participate on a limited basis will also be considered. USA reserves the right to issue a single/sole source subcontract. The period of performance and technical requirements are currently being defined for inclusion into a formal RFP package. USA anticipates the issuance of a formal Request for Proposal (RFP) within 30 days of release of this RFI. This RFI is for information and planning purposes, and the objective is: (1) to invite potential sources to submit information that allows USA to conduct a technical assessment of capabilities and qualifications, and (2) to promote a best value competition. This preliminary information does not constitute an RFP, Invitation for Bid, or Request for Quotation, and it is not to be construed as a commitment by USA to enter into a subcontract. This procurement is subject to review or cancellation at any time. Statement of Capabilities and Qualifications: USA invites potential sources to submit a Statement of Capabilities and Qualifications document that will allow USA to conduct an assessment of capabilities and qualifications. The Statement of Capabilities and Qualifications document shall be no more than five (5) pages (8.5? x 11?) in length. The required information shall include, but not be limited to: (1) A brief description of your company, including its size, major products, and primary customer focus, (2) A discussion of your company?s past experience and performance in developing/performing the requirements described herein, and (3) A brief description of your company?s facilities, assets and any other available resources. Past experience will be identified by a listing of all related contracts and subcontracts, along with a description of your company?s performance under these contracts and subcontracts. If any of these contracts and subcontracts are Government related, provide the Contracting Officer?s name and telephone number in order for USA to validate your statements. To be considered as a viable source, USA will evaluate the Statement of Capabilities and Qualifications by considering, but not limited to, the following criteria: (1) Depth and relevance of experience and past performance history, which convey a demonstrated technical, cost, schedule ability; (2) An understanding of the technical requirements and risks associated with this requirement; and (3) The adequacy and availability of necessary facilities and resources for implementing and performing the contractual work. USA reserves the right to request supplemental information in order to clarify your company?s capabilities and qualifications. Only offerors deemed to be best qualified, or have a reasonable chance for award, will receive the RFP. Due to the nature of the technical requirements, firms interested in participating in this procurement are subject to the requirements of the U.S. Department of State International Traffic and Arms Regulation (ITAR) and/or the U.S. Department of Commerce Export Administration Regulations (EAR). Firms interested in this procurement shall submit their Statement of Capabilities and Qualifications document no later than June 9, 2003 to the following address: United Space Alliance, LLC (USA), 8550 Astronaut Boulevard, Cape Canaveral, Florida 32920, Attention: Eddie Jarrell, Mail Code USK-360. Questions regarding this procurement shall be referred to Mr. Jarrell as follows (Telephone: (321) 861-1158, Facsimile: (321) 861-6221, E:mail: JarrelEl@usano.ksc.nasa.gov).
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=73#106027)
- Record
- SN00336841-W 20030601/030531233911 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |