SOLICITATION NOTICE
23 -- 863 G Bobcat
- Notice Date
- 7/8/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Pacific Air Forces, 354 CONS, 3112 Broadway Ave, Unit 5B, Eielson AFB, AK, 99702-1887
- ZIP Code
- 99702-1887
- Solicitation Number
- F2409T31810100
- Response Due
- 7/21/2003
- Archive Date
- 8/5/2003
- Point of Contact
- Nyasha Dehenre, Contract Administrator, Phone 907-377-6162, Fax 907-377-2389, - Charles Ferro, Contract Specialist, Phone 9073773169, Fax 9073772389,
- E-Mail Address
-
nyasha.dehenre@eielson.af.mil, charles.ferro@eielson.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. Solicitation F2409T31810100 is hereby issued as a Request for Quote. This solicitation document and all incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-06. This acquisition is 100% set-aside for small businesses and NAICS code 561730 (SIC 0782) applies, which has a small business size standard of $6 million. The requirement for the 863 G Bobcat consists of: (CLIN #0001, Quantity, and Description) 0001 Manufacturer: Bobcat. One (1). 863 G Bobcat with tires, advanced control system, backup alarm, attachement control unit, cab and heater, engine heater, high flow hydraulics, sound cab option, two speed motor, 88” inch snow bucket, 96” inch V-blade plow, 72” inch pick-up sweeper, 78” inch Snow Blower, hydraulic motor package. If quoting on an “or Equal” vendor must include sufficient information to allow evaluation. Please quote FOB Destination pricing. Contractor must be CCR registered to receive award. Take note of the following provisions: 52.212-1, Instructions to Offerors – Commercial Items; 52.212-3, Offeror Representations and Certifications -- Commercial Items; 52.212-3 (ALT III); 52.212-4, Contract Terms and Conditions -- Commercial Items; 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items; Take note of the following stipulation: PAYMENT BY ELECTRONIC FUNDS TRANSFER—CENTRAL CONTRACTOR REGISTRATION (MAY 1999) (a) Method of payment. (1) All payments by the Government under this contract shall be made by electronic funds transfer (EFT), except as provided in paragraph (a)(2) of this clause. As used in this clause, the term “EFT” refers to the funds transfer and may also include the payment information transfer. (2) In the event the Government is unable to release one or more payments by EFT, the Contractor agrees to either-- (i) Accept payment by check or some other mutually agreeable method of payment; or (ii) Request the Government to extend the payment due date until such time as the Government can make payment by EFT (but see paragraph (d) of this clause). (b) Contractor's EFT information. The Government shall make payment to the Contractor using the EFT information contained in the Central Contractor Registration (CCR) database. In the event that the EFT information changes, the Contractor shall be responsible for providing the updated information to the CCR database. (c) Mechanisms for EFT payment. The Government may make payment by EFT through either the Automated Clearing House (ACH) network, subject to the rules of the National Automated Clearing House Association, or the Fedwire Transfer System. The rules governing Federal payments through the ACH are contained in 31 CFR part 210. (d) Suspension of payment. If the Contractor's EFT information in the CCR database is incorrect, then the Government need not make payment to the Contractor under this contract until correct EFT information is entered into the CCR database; and any invoice or contract financing request shall be deemed not to be a proper invoice for the purpose of prompt payment under this contract. The prompt payment terms of the contract regarding notice of an improper invoice and delays in accrual of interest penalties apply. (e) Contractor EFT arrangements. If the Contractor has identified multiple payment receiving points (i.e., more than one remittance address and/or EFT information set) in the CCR database, and the Contractor has not notified the Government of the payment receiving point applicable to this contract, the Government shall make payment to the first payment receiving point (EFT information set or remittance address as applicable) listed in the CCR database. (f) Liability for uncompleted or erroneous transfers. (1) If an uncompleted or erroneous transfer occurs because the Government used the Contractor's EFT information incorrectly, the Government remains responsible for-- (i) Making a correct payment; (ii) Paying any prompt payment penalty due; and (iii) Recovering any erroneously directed funds. (2) If an uncompleted or erroneous transfer occurs because the Contractor's EFT information was incorrect, or was revised within 30 days of Government release of the EFT payment transaction instruction to the Federal Reserve System, and-- (i) If the funds are no longer under the control of the payment office, the Government is deemed to have made payment and the Contractor is responsible for recovery of any erroneously directed funds; or (ii) If the funds remain under the control of the payment office, the Government shall not make payment, and the provisions of paragraph (d) of this clause shall apply. (g) EFT and prompt payment. A payment shall be deemed to have been made in a timely manner in accordance with the prompt payment terms of this contract if, in the EFT payment transaction instruction released to the Federal Reserve System, the date specified for settlement of the payment is on or before the prompt payment due date, provided the specified payment date is a valid date under the rules of the Federal Reserve System. (h) EFT and assignment of claims. If the Contractor assigns the proceeds of this contract as provided for in the assignment of claims terms of this contract, the Contractor shall require as a condition of any such assignment, that the assignee shall register in the CCR database and shall be paid by EFT in accordance with the terms of this clause. In all respects, the requirements of this clause shall apply to the assignee as if it were the Contractor. EFT information that shows the ultimate recipient of the transfer to be other than the Contractor, in the absence of a proper assignment of claims acceptable to the Government, is incorrect EFT information within the meaning of paragraph (d) of this clause. (i) Liability for change of EFT information by financial agent. The Government is not liable for errors resulting from changes to EFT information made by the Contractor's financial agent. (j) Payment information. The payment or disbursing office shall forward to the Contractor available payment information that is suitable for transmission as of the date of release of the EFT instruction to the Federal Reserve System. The Government may request the Contractor to designate a desired format and method(s) for delivery of payment information from a list of formats and methods the payment office is capable of executing. However, the Government does not guarantee that any particular format or method of delivery is available at any particular payment office and retains the latitude to use the format and delivery method most convenient to the Government. If the Government makes payment by check in accordance with paragraph (a) of this clause, the Government shall mail the payment information to the remittance address contained in the CCR database. (End) F.O.B. DESTINATION (Nov 1991) (a) The term "f.o.b. destination," as used in this statement, means -- (1) Free of expense to the Government, on board the carrier's conveyance, at a specified delivery point where the consignee's facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and (2) Supplies shall be delivered to the destination consignee's wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or "constructive placement" as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including "piggyback") is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for "heavy or bulky freight." When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarded for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee. (b) The Contractor shall -- (1) (i) Pack and mark the shipment to comply with contract specifications; or (ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements; (2) Prepare and distribute commercial bills of lading; (3) Deliver the shipment in good order and condition to the point of delivery specified in the contract; (4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract; (5) Furnish a delivery schedule and designate the mode of delivering carrier; and (6) Pay and bear all charges to the specified point of delivery. (End) Upon request from the Contracting POC listed below, offerors shall include a completed electronic copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items, with its offer, along with alternate I. In addition to the information required above, the following additional information must be provided: TIN #, Cage Code, Duns #, and Vendor POC email and telephone #. This acquisition is 100% set-aside for small businesses. E-mail the Contracting POC for an official copy of the RFQ. Submit signed and dated RFQs to 354 CONS/LGCB, preferably by email to nyasha.dehenre@eielson.af.mil, by fax to (907) 377 – 2389, or by mail to 3112 Broadway Ave Unit 5B, Eielson AFB AK 99702-3112. Quotes must be received no later than 1600 (4:00pm) AST, 21 July 2003 to be considered for award. The Government reserves the right to award without discussions
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/PAF/354CONS/F2409T31810100/listing.html)
- Place of Performance
- Address: Eielson AFB, AK
- Zip Code: 99702
- Zip Code: 99702
- Record
- SN00366968-F 20030710/030708221822 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |