Loren Data's SAM Daily™

FBO DAILY ISSUE OF JULY 19, 2003 FBO #0597
SOLICITATION NOTICE

25 -- Exchange/Purchase of 10 Caterpillar CAT D-7155 Transmissions NSN 2520-01-082-8143, PN: MA21020.

Notice Date

7/17/2003
 

Notice Type

Solicitation Notice
 

Contracting Office

USPFO for Texas, ATTN: Contracting Officer, P.O. Box 5218, Austin, TX 78763-5218
 

ZIP Code

78763-5218
 

Solicitation Number

DAHA4-03-T-0058
 

Response Due

8/1/2003
 

Archive Date

9/30/2003
 

Point of Contact

Mary Sue Austin, 512-782-5537
 

E-Mail Address

USPFO for Texas
(marysue.austin@tx.ngb.army.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

NA Combined Synopsis/Solicitation for the Exchange/Purchase of 10 each Caterpillar CAT D-7155 Transmissions NSN 2520-01-082-8143, PN: MA21020. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 , as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation DAHA41-03-T-0058 is issued as a Request F or Quotation(RFQ)which incorporates provisions and clauses in effect through Federal Acquisition Circular 14, effective as of 06/23/03. This is a total small business set-aside acquisition with an associated NAICS of 336350, small business size standard of 750 employees. The Small Business Competitiveness Demonstration Program is not applicable. Description of requirements for CAT D-7155 Transmission is as follows: Complete transmission with forward clutch/brake assembly and output shaft yoke, Unit must not have been disassembled, No broken or missing external components, Output and input shafts must rotate freely 360 degrees, Transmissions will be completely disassembled. All components and parts will be inspected for serviceability. All repair parts, reu sed hard parts, components and the entire overhauled transmission must meet the Technical Manual Specifications. (Chapter 7, TM 9-2320-273-34, Direct and General Support Maintenance, dated 18 Feb 90. Changes 1 and 2 dated 1 Aug 83 and 8 Apr 87.)Mandatory replacement parts will include: All seals(including bell housing o-ring), gaskets, all bearings and filters, all damaged hard parts and components, all valve body diaphragms and o-rings. Transmissions must pass a dynamometer test. Dyno test shall include: RPM, Flow, Stall, Leaks and Shift Quality. All pressures will be recorded and returned to the TX-RSMS along with the Dyno report. Transmission will be UV Tested (Die Test), with NO fluid leaks allowed. Special attention to the mating surface between fro nt and rear housings. Stamped metal plate (data plate) will be affixed to the transmission; data plate will include assembly number, part number and serial number. Data plate must be installed on the lower rear housing, so it may be visible when assembly is installed. Transmission must be painted CARC Green. All rebuilt transmissions will start the SIX (6) month warranty period on the date the TX-RSMS completes the installation. Vendor is required to pick up the core transmission from and and deliver the r ebuilt transmission to the TX-RSMS, 748 East McLeroy, Saginaw, TX 76179-4604. APPLICABLE PROVISIONS AND CLAUSES: (1)FAR 52.212-1, Instructions to Offeror-Commercial Items. (2)FAR 52.212-3, Offeror Representations and Certifications-Commercial Items. All of ferors are to include a completed copy of the Representations and Certifications with their offer (a copy of FAR 52.2l2-3 in full text is available at http://www.arnet.gov/far. (3)FAR 52.212-4. Contract Terms and Conditions—Commercial Items; (4)FAR 52 .212-5, Contract Terms and Conditions Required to Implement Statutes and Executive Orders-Commercial Items; (5)DFARS 252.212-7000 Offeror Representations and Certifications—Commercial Items (6)DFARS 252.204-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items;(7)DFARS 252.204-7004, Required Central Contractor Registration. See Numbered Notes 1 and 9. All responsible sources may submit a quote which, if timely receiv ed, shall be considered. Offers may be submitted by e-mail to the e-mail addresses listed below, or by fax to (512)782-5687, Attention: Mary Sue Austin. Offers are due by 4:00 P.M. CST (Daylight Savings Time) on 1 August 2003. For information concerning th is solicitation, contact Mary Sue Austin by phone at:(512)782-5537 or by e-mail at: marysue.austin@tx.ngb.army.mil; or Carol Koenig by phone at: (512)782-5529 o r by e-mail at: Carol.Koenig@tx.ngb.army.mil.
 

Web Link

Link to FedBizOpps document.
(http://www.eps.gov/spg/USA/NGB/DAHA41/DAHA4-03-T-0058/listing.html)
 

Place of Performance

Address: Texas Army National Guard Readiness Sustainment Maintenance Site (TXARNG RSMS) 855 East Industrial Saginaw TX

Zip Code: 76131

Country: US
 

Record

SN00374633-F 20030719/030717221903 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |