SOLICITATION NOTICE
Y -- Aircraft Intermediate Maintenance Department (AIMD) Engine Shop (Two-Phase, Design/Build), Naval Air Station-Joint Reserve Base, Fort Worth, TX
- Notice Date
- 1/14/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, Engineering Field Division, South, 2155 Eagle Drive, North Charleston, SC, 29406
- ZIP Code
- 29406
- Solicitation Number
- N62467-03-R-0102
- Response Due
- 3/4/2003
- Point of Contact
- Susan King, Contract Specialist, Phone 843-820-5632, Fax 843-818-6880, - Shirley Shumer, Program Management Assistant, Phone 843-820-5923, Fax 843-818-6900,
- E-Mail Address
-
kingsm@efdsouth.navfac.navy.mil, shumerso@efdsouth.navfac.navy.mil
- Description
- THIS SOLICITATION IS HEREBY BEING ISSUED ON AN UNRESTRICTED BASIS, INVITING FULL AND OPEN COMPETITION. This procurement is for the award of a Design Build contract. The Two-Phase, Design-Build Request for Proposal procedures will be utilized for this procurement. It consists of the design and construction of a AIMD ENGINE SHOP, NAVAL AIR STATION-JOINT RESERVE BASE, FORT WORTH, TX. The new AIMD engine shop is for F-404 jet and T-56 turbo-prop engine work. The construction of this project will provide antiterrorism force protection/physical security in compliance with the minimum construction standards as directed in the DEPARTMENT OF DEFENSE ANTITERRORISM/FORCE PROTECTION CONSTRUCTION STANDARDS dated July 31, 2002. Square footage of the facility is 30,225 square feet, and will be constructed of steel frame on reinforced concrete slab. Work includes integrated site development, including paving, and incidental related work to provide a complete and useable facility. Facility must be equipped with six (6) pass through bays with a twenty-five (25) foot roll-up door on each end of the bay. Facility must be equipped with two 8-ton bridge cranes (for the F404), two 3-ton bridge cranes (for the T-56) and two independent 3-ton cranes for modular engine assembly and prop inspections and repair. The facility will include a completely cooled and heated 7,375 sf administrative space to include tool storage and IMRL storage, and a mens and womens locker room with shower facilities. The estimated cost for design and construction of the project is between $7,250,000and $7,760,000. Proposals will be evaluated using two-phase source selection procedures that will result in award of a firm-fixed price design/build contract to the responsible proposer whose proposal, conforming to the solicitation, is the BEST VALUE to the Government, price and technical factors considered. Phase I of the procurement process is a narrowing phase to approximately five (5) offerors (design-build firms or teams) based on design-build factors that include: FACTOR A-Past Performance, 1-Design Team, and 2-Construction Team; FACTOR B-Small Business Effort (Phase I); FACTOR C-Technical Qualifications, 1-Design Team and 2-Construction Team; and FACTOR D-Management Approach. There are no Plans and Specifications in Phase I. A maximum of five (5) firms will be selected to submit Technical and Price Proposals for Phase II and an amendment will be issued to those firms only. Only those offerors selected in Phase I will be allowed to proceed into Phase II. In Phase II, the competitive field will be required to submit technical and price proposals for the project. Price proposals will include total evaluated price, such as, base proposal, options, and evaluation of scope/design options within the Governments published budget for award. The Government reserves the right to: reject any or all proposals at any time prior to award; negotiate with any or all offerors; award the contract to other than the offeror submitting the lowest total price; award to other than the offeror submitting the highest technically rated; and award to the offeror submitting the proposal determined by the Government to be the most advantageous (best value) to the Government. PROPOSERS ARE ADVISED THAT THE GOVERNMENT INTENDS TO EVALUATE PROPOSALS AND SELECT PHASE II OFFERORS WITHOUT DISCUSSIONS OR ANY CONTACT CONCERNING THE PROPOSALS RECEIVED. Therefore, proposals should be submitted initially on the most FAVORABLE terms. Proposers should not assume that they will be contacted or afforded an opportunity to qualify, discuss, or revise their proposals. FIRMS SUBMITTING TECHNICAL AND PRICE PROPOSALS WILL NOT BE COMPENSATED FOR SPECIFICATIONS OR DOCUMENTATION. The Government intends to issue the Phase I Request for Proposals (RFP) electronically by posting it on the NAVFAC website, http://esol.navfac.navy.mil., on 29 January 2003. Phase I proposals will be due on 04 March 2003. Offerors must register themselves on the Internet at http://esol.navfac.navy.mil. The Phase II RFP, including the plans and specs, will be posted at a later date on the NAVFAC web site for viewing and downloading, although the download time may be excessive. Copies of a compact disk (CD ROM) of the Phase II plans and specifications may be purchased from the Defense Automated Printing Service (DAPS) in Charleston, SC. The point of contact at DAPS is Paula Brooks at (843)743-2500, ext. 24. The Fax Number for Daps is (843)743-2505. The official plan holders list will be maintained on and may be printed from the web site. Amendments will be posted on the web site for downloading. This will be the only method of distributing amendments; therefore, IT IS THE OFFERORS RESPONSIBILITY TO CHECK THE WEB SITE PERIODICALLY FOR ANY AMENDMENTS TO THIS SOLICITATION. Offerors MUST also be registered in the Contractors Central Registration (CCR) in order to participate in this procurement. The website for CCR is http://www.ccr.gov. For inquiries about the date of receipt of proposals or the number of amendments, contact Shirley Shumer at (843) 820-5923. Technical inquiries prior to Request for Proposals must be submitted in writing 15 days before proposals are due to the address listed above; faxed to (843) 818-6880, Attn: Susan King, Code ACQ11SK; or e-mailed to kingsm@efdsouth.navfac.navy.mil. Results of proposals will not be available. The NAICS is 236210: Industrial Building Construction and Size Standard is $28.5M. Once the government has determined those firms qualified to proceed onto Phase II, an amendment with plans and specifications will be issued. Only those firms will be allowed to respond with their technical price IAW Phase II criteria. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (14-JAN-2003). IT ACTUALLY FIRST APPEARED ON THE FEDBIZOPPS SYSTEM ON 18-JUL-2003. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DON/NAVFAC/N62467/N62467-03-R-0102/listing.html)
- Place of Performance
- Address: Naval Air Station-Joint Reserve Base, Fort Worth, TX
- Record
- SN00375653-F 20030720/030718221724 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |