SOLICITATION NOTICE
36 -- WAFER SAW
- Notice Date
- 7/23/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
- ZIP Code
- 44135
- Solicitation Number
- 03-C3G-001
- Response Due
- 8/7/2003
- Archive Date
- 7/23/2004
- Point of Contact
- Carol K. Sharp, Contracting Officer, Phone (216) 433-2771, Fax (216) 433-2480, Email Carol.K.Sharp@grc.nasa.gov
- E-Mail Address
-
Email your questions to Carol K. Sharp
(Carol.K.Sharp@grc.nasa.gov)
- Description
- This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ)] for one (1) ea. Wafer Saw, to be provided in accordance with the following specifications: 1. Saw must accommodate up to 6 inch diameter wafers 2. Saw must be capable of cutting ceramic materials (e.g. LaAlO3, MgO, Al2O3, etc) up to 0.020 inches thick and semiconductor materials (e.g. GaAs, Si, InP up to 0.010 inches thick). 3. Air bearing water cooled spindle shall have programmable speed up to 40,000 RPM. 4. Saw must be equipped with CCD camera for alignment and viewing. 5. ?Y? and ?Z? axis resolution must be 1 micron or better. 6. ?X? axis resolution must be 4 microns or better. 7. Theta axis resolution shall be 4 arc seconds or better. 8. All axes must be direct drive, not belt driven. 9. Safety features shall include as a minimum: automatic spindle overload shutdown, spindle cooling and cutting water sensors, blade guard interlock, and spindle brake in case of sudden air lock. 10. Machine installation and nominally one week operator training must be included. 11. Saw must have, or be upgradeable to possess, a pattern recognition system for automatic alignment and cutting. 12. Wafer chuck system must be compatible with either substrates that are wax mounted to a carrier or tape mounted. 13. Ability to cut very small, especially very narrow, die is a consideration. The provisions and clauses in the RFQ are those in effect through FAC 01-14. This procurement is a total small business set-aside. See Note 1. The NAICS Code and the small business size standard for this procurement are 333295 and 500 respectively. The offeror shall state in their offer their size status for this procurement. All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 4413 is required within 4-5 wks ARO. Delivery shall be FOB Destination. The DPAS rating for this procurement is DO-C9. Offers for the items(s) described above are due by COB 8/7/03 to the Contracting Officer at the abovementioned delivery address at Mail Stop 500-306 and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), CAGE Code, identification of any special commercial terms, and be signed by an authorized company representative. Offerors shall provide the information required by FAR 52.212-1 (Oct 2002), Instructions to Offerors-Commercial, which is incorporated by reference. If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (Feb 2002), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (June 2003), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: The FAR may be obtained via the Internet at URL: http://www.arnet.gov/far/ _X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government, with Alternate I (41 U.S.C. 253g and 10 U.S.C. 2402). __ (2) 52.219-3, Notice of Total HUBZone Small Business Set-Aside (Jan 1999). __ (3) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jan 1999) (if the offeror elects to waive the preference, it shall so indicate in its offer). __ (4)(i) 52.219-5, Very Small Business Set-Aside (Pub. L. 103-403, section 304, Small Business Reauthorization and Amendments Act of 1994). __ (ii) Alternate I to 52.219-5. __ (iii) Alternate II to 52.219-5. X (5) 52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637 (d)(2) and (3)). __ (6) 52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)). __ (7) 52.219-14, Limitations on Subcontracting (15 U.S.C. 637(a)(14)). __ (8)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). __ (ii) Alternate I of 52.219-23. __ (9) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (10) 52.219-26, Small Disadvantaged Business Participation Program-Incentive Subcontracting (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). X_ (11) 52.222-21, Prohibition of Segregated Facilities (Feb 1999) X (12) 52.222-26, Equal Opportunity (E.O. 11246). X_ (13) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (38 U.S.C. 4212) X_ (14) 52.222-36, Affirmative Action for Workers with Disabilities (29 U.S.C. 793). X_ (15) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (38 U.S.C. 4212). X_ (16) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126). __ (17)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Products (42 U.S.C. 6962(c)(3)(A)(ii)). __ (ii) Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). __ (18) 52.225-1, Buy American Act-Balance of Payments Program-Supplies (41 U.S.C. 10a - 10d). __ (19)(i) 52.225-3, Buy American Act-North American Free Trade Agreement-Israeli Trade Act-Balance of Payments Program (41 U.S.C. 10a - 10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note). __ (ii) Alternate I of 52.225-3. __ (iii) Alternate II of 52.225-3. __ (20) 52.225-5, Trade Agreements (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __ (21) 52.225-13, Restriction on Certain Foreign Purchases (E.O. 12722, 12724, 13059, 13067, 13121, and 13129). X_ (22) 52.225-15, Sanctioned European Union Country End Products (E.O. 12849). __ (23) 52.225-16, Sanctioned European Union Country Services (E.O. 12849). __ (24) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (31 U.S.C. 3332). X_ (25) 52.232-34, Payment by Electronic Funds Transfer-Other than Central Contractor Registration (31 U.S.C. 3332). __ (26) 52.232-36, Payment by Third Party (31 U.S.C. 3332). __ (27) 52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a). __ (28)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 1241). __ (ii) Alternate I of 52.247-64. (c) The Contractor agrees to comply with the FAR clauses in this paragraph (c), applicable to commercial services, which the The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing (e-mail or fax) to the Contracting Officer not later than July 31, 2003. Telephone questions will not be accepted. Selection and award will be made to that offeror whose offer will be most advantageous to the Government, with consideration given to the factors of proposed technical merit, price, and past performance. Delivery shall also be considered. It is critical that offerors provide adequate detail to allow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items with their offer. These may be obtained via the internet at URL: http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/. These representations and certifications will be incorporated by reference in any resultant contract. An ombudsman has been appointed -- See NASA Specific Note "B". Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the following Internet site for the release of solicitation amendments (if any): http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=22 . Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). Any referenced notes may be viewed at the following URLs linked below.
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=22#106736)
- Record
- SN00380120-W 20030725/030723215508 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |