SOLICITATION NOTICE
34 -- PIRANHA IRONWORKER, PRESS BRAKE, SHEAR
- Notice Date
- 7/29/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Supply Systems Command, FISC Pearl Harbor, Bldg. 475-2, Code 200 1942 Gaffney Street, Suite 100, Pearl Harbor, HI, 96860-4549
- ZIP Code
- 96860-4549
- Solicitation Number
- N00604-03-T-B104
- Response Due
- 8/5/2003
- Archive Date
- 8/20/2003
- Point of Contact
- Lambert Leong, Contract Specialist, Phone 808-473-7508, Fax 808-473-5750,
- E-Mail Address
-
lambert_c_leong@pearl.fisc.navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This solicitation is restricted to small businesses. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, Streamline Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a separate written solicitation will not be issued. Request for Quotation number N00604-03-T-B104 applies. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-06 and Defense Change Notice 20020314. The NAICS code is 332322 and the business size standard is 500 employees. This requirement is for a firm fixed price contract for: ITEM 0001 – PIRANHA P50 IRONWORKER, HYDRAULIC IRON WORKER MODEL P50 MAXIMUM SPECS: PUNCHING: 13/16" DIAMETER THROUGH 3/4" PLATE, THROAT DEPTH: 8", BENDING: 8" W/4-WAY DIE BLOCK, ROUND BAR SHEAR: 1/4" THROUGH 1 1/2", SQUARE BAR SHEAR: 1/2" THROUGH 1", PLATE SHEAR: 15" X 5/8", 10" X 3/4", 4" X 1/4", ANGLE SHEAR: 5" X 5" X 3/8", COPING/NOTCHING: 2-3/4" X 1/4" STANDARD EQUIPMENT: AUTOMATIC HOLD DOWN: PUNCH HOLDER, STRIPPER, AND DIE BLOCK: 14 PUNCH & DIE SETS 1/4 " THROUGH 1-1/16"; 8" BENDING W/4-WAY DIE BLOCK; SET 1" ROUND BAR KNIVES: SET OF COPER KNIVES: SET OF ANGLE KNIVES; 3/8" ALLEN WRENCH; SET OF CHIP BUCKETS: EXTRA FILTER ELEMENTS: FOOT SWITCH: INSTRUCTION/PARTS BOOK/VIEDO.; ITEM 0002 – PIRANHA 65-8 PRESS BRAKE, HYDRO MECHANICAL PRESS BRAKE MODEL 65-8. CAPACITIES: TONNAGE: 65 TON: BED LENGTH: 8 FT; DISTANCE BETWEEN HOUSING: 78"; OPEN HEIGHT(WITHOUT DIE RAIL): 15'; VARIABLE STROKE: 0" TO 6"; DRIVE MOTOR: 10 HP; MAXIMUN PRESSING SPEED: 24" PER MIN; APPROACH & RETURN SPEED: 130" PER MIN.; APPROXIMATE WEIGHT: 10,700 LBS. STANDARD EQUIPMENT: GENERATION II OPERATOR PEDESTAL WITH DUAL PALM CONTROLS: CONSIST OF : START BUTTON, EMERGENCY STOP BUTTON, RAM UP BUTTON-ALLOWS RAM RETURN FROM ANY POSITION OF DOWN STROKE. PROGRAMMABLE "HAND", "FOOT", OR "HAND/FOOT/" SELECTION, MODE SELECTION. KEYED RUN/PROGRAM SWITCH, PALM BUTTONS ON EACH END AND A FOOT SWITCH AT THE BASE. SELECTING "HAND/FOOT" ON CONTROL ALLOWS PALM CONTROL OF THE PRESS BRAKE RAM TO SPEED CHANGE POINT, THEN FINISH BENDING BY USING THE FOOT SWITCH. FAST APPROACH/FAST RETURN SPEED WITH INFINITELY VARIALBLE PRESSING SPEED. BED TILT ADJUSTMENT. PIRANHA'S BED IS TILTED IN LIEU OF THE RAM; THEREFORE THE RAM ALWAYS REMAINS PERFECTLY ALIGNED WITH THE RAM GUIDES.; ITEM 0003 – PIRANHA 1/2 – 10 SHEAR, HYDRO MECHANICAL PRESS BRAKE MODEL 65-8. CAPACITIES: TONNAGE: 65 TON: BED LENGTH: 8 FT; DISTANCE BETWEEN HOUSING: 78"; OPEN HEIGHT(WITHOUT DIE RAIL): 15'; VARIABLE STROKE: 0" TO 6"; DRIVE MOTOR: 10 HP; MAXIMUN PRESSING SPEED: 24" PER MIN; APPROACH & RETURN SPEED: 130" PER MIN.; APPROXIMATE WEIGHT: 10,700 LBS. STANDARD EQUIPMENT: GENERATION II OPERATOR PEDESTAL WITH DUAL PALM CONTROLS: CONSIST OF : START BUTTON, EMERGENCY STOP BUTTON, RAM UP BUTTON-ALLOWS RAM RETURN FROM ANY POSITION OF DOWN STROKE. PROGRAMMABLE "HAND", "FOOT", OR "HAND/FOOT/" SELECTION, MODE SELECTION. KEYED RUN/PROGRAM SWITCH, PALM BUTTONS ON EACH END AND A FOOT SWITCH AT THE BASE. SELECTING "HAND/FOOT" ON CONTROL ALLOWS PALM CONTROL OF THE PRESS BRAKE RAM TO SPEED CHANGE POINT, THEN FINISH BENDING BY USING THE FOOT SWITCH. FAST APPROACH/FAST RETURN SPEED WITH INFINITELY VARIALBLE PRESSING SPEED. BED TILT ADJUSTMENT. PIRANHA'S BED IS TILTED IN LIEU OF THE RAM; THEREFORE THE RAM ALWAYS REMAINS PERFECTLY ALIGNED WITH THE RAM GUIDES.. Required delivery is 60 days ARO, F.O.B. Destination, Pearl Harbor, Hawaii 96860. Inspection and Acceptance shall be made at Destination by the receiving activity. In the event the unit price and extended price are ambiguous, the Government shall use the indicated unit price for evaluation and award purposes. The provision at FAR 52.212-1, Instructions to Offers-Commercial Items applies. Addendum to FAR 52.212-1: Paragraph (h), Multiple awards-Delete entire paragraph. Substitute "Single Award. The Government plans to award a single contract resulting from this solicitation. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered unless the offeror specified otherwise in the offer." The provision at FAR 52.212-2, Evaluation—Commercial Items applies. The Government intends to make a single award to the responsible contractor whose proposal is technically acceptable, in full compliance to all other requirements set forth in the solicitation and the lowest cost or price. Technical acceptability is more important than price. The Government reserves the right to judge which quotes show the required capability and the right to eliminate from further consideration those quotes which are considered unacceptable and not capable of being made acceptable without major rewrite or revision. Offerors are required to complete and include a copy of the following provisions with their proposals (copies may be obtained from http://farsite.hill.af.mil or by request from this office): FAR 52.212-3, Offeror Representation and Certifications-Commercial Items; DFARS 252.212-7000, Offeror Representations and Certifications-Commercial Items. Also, DFARS 252.225-7035, Buy American Act and Balance of Payments Program Certificate; DFARS 252.204-7004, Required Central Contract Registration. Clause 52.212-4, Contract Terms and Conditions-Commercial Items, applies. Add the following provisions: FAR 52.215-5, Facsimile Proposals. The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items applies with the following applicable clauses for paragraph (b): FAR 52.222-19 FAR 52.222-21 Prohibition of Segregated Facilities; FAR 52.222-26, Equal Opportunity; FAR 52.222-35, Affirmative Action for Special Disabled and Vietnam Era Veterans; FAR 52.222-36 Affirmative Action for Workers with Disabilities; FAR 52.222-37, Employment Reports on Special Disabled and Vietnam Era Veterans; FAR 52.232-33 Payment by EFT – CCR. DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, applies with the following clauses applicable to paragraph (b): DFARS 252.227-7035 Buy American – North American Free Trade Agreement Implementation Act – Balance of Payment Program. Quotes must be received by the Contracting Officer no later than 1:00 p.m. HST, 05 AUGUST 2003. Quotes may be mailed, faxed or e-mailed. Quotes should be mailed to Department of Navy, Fleet and Industrial Supply Center, Regional Contracting Department (Code 201 LL), 1492 Gaffney St., Suite 100, Pearl Harbor, Hawaii 96860-5300. Facsimile proposals will be accepted at 808/473-5750. E-mail quotes may be addressed to: lambert_c_leong@pearl.fisc.navy.mil.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DON/NAVSUP/N00604/N00604-03-T-B104/listing.html)
- Place of Performance
- Address: 1492 GAFFNEY STREET, PEARL HARBOR, HAWAII
- Zip Code: 96860
- Zip Code: 96860
- Record
- SN00386685-F 20030731/030729224344 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |