SOLICITATION NOTICE
61 -- W-7 Cable
- Notice Date
- 7/30/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- F34601-03-R-0468
- Response Due
- 9/15/2003
- Archive Date
- 1/31/2004
- Point of Contact
- Christy Slayton, Contract+Negotiator, Phone 405-739-4353, Fax 405-739-5493,
- E-Mail Address
-
christy.slayton@tinker.af.mil
- Description
- NSN: 6150014284496PR P/N: 1820M67G02 NOUN: Cable Assembly The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within 30 days of the solicitation issuance will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. ITEM DESCRIPTION: The cable is an extended length of electrical wiring cable with 4 shorter lengths extended from the cable. The cable has electrical connectors attached at the ends. The function of the cable is to provide supply electrical power to the engine accessories. The dimensions are 52.50 ? 53.50 overall length of cable is 42.50 ? 43.50 and another extended length of 11.50 ? 12.50 inches. The material consists of electrical wiring, silicone tape, aluminum connectors, shrink tubing 1696M92STDA23B5 B50TF3 CL-A (Elec. Embedding epoxy compound). Applicable to: F110 Destination: FB2039 Best Estimated Qty is 49 each. Quantity ranges will be solicited. Ranges will be 20-40, 41-61 and 62-82. Requirements can change prior to award, therefore, contractors should propose each range. Due Date: July 2004 Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) 0001. The approximate issue date of the solicitation will be 14 August, 2003. The response date will be approximately 30 days after the issuance. The anticipated award date will be 30 September 2003. Written and electronic procedures will be used for this solicitation. SOLE SOURCE To: BAE Systems. No telephone requests. POC is Christy Slayton, (405) 739-4478. E-mail written requests to Christy.Slayton@tinker.af.mil. No drawings available. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation will identify the office where additional information can be obtained concerning qualification requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm listed. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. See Note 26 NSN: 6150015014362PR P/N: 7-21101 NOUN: Cable Assembly The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within 30 days of the solicitation issuance will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. ITEM DESCRIPTION: The cable is an extended length of electrical wiring cable with 4 shorter lengths extended from the cable. The cable has electrical connectors attached at the ends. The function of the cable is to provide supply electrical power to the engine accessories. The dimensions are 52.50 ? 53.50 overall length of cable is 42.50 ? 43.50 and another extended length of 11.50 ? 12.50 inches. The material consists of electrical wiring, silicone tape, aluminum connectors, shrink tubing 1696M92STDA23B5 B50TF3 CL-A (Elec. Embedding epoxy compound). Applicable to: F110 Destination: FB2039 Best Estimated Qty is 49 each. Quantity ranges will be solicited. Ranges will be 20-40, 41-61 and 62-82. Requirements can change prior to award, therefore, contractors should propose each range. Due Date: July 2004 Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) 0001. The approximate issue date of the solicitation will be 14 August, 2003. The response date will be approximately 30 days after the issuance. The anticipated award date will be 30 September 2003. Written and electronic procedures will be used for this solicitation. SOLE SOURCE To: LaBarge, Inc. No telephone requests. POC is Christy Slayton, (405) 739-4353. E-mail written requests to Christy.Slayton@tinker.af.mil. No drawings available. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation will identify the office where additional information can be obtained concerning qualification requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm listed. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. See Note 26
- Record
- SN00387206-W 20030801/030730213657 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |