Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 17, 2003 FBO #0626
SOLICITATION NOTICE

47 -- Pipeline Supplies for northeastern Montana

Notice Date

8/15/2003
 

Notice Type

Solicitation Notice
 

Contracting Office

BLM MONTANA STATE OFFICE 5001 SOUTHGATE DR. PO BOX 36800 BILLINGS MT 59107
 

ZIP Code

59107
 

Solicitation Number

ESQ030138
 

Response Due

9/2/2003
 

Archive Date

8/14/2004
 

Point of Contact

Lori Mading Purchasing Agent 4068965196 Lori_Mading@blm.gov;
 

E-Mail Address

Email your questions to Point of Contact above, or if none listed, contact the IDEAS EC HELP DESK for assistance
(EC_helpdesk@NBC.GOV)
 

Small Business Set-Aside

Total Small Business
 

Description

NA This is a combined synopsis/solicitation for commercial item supply prepared in accordance with the format in Subpart 12.6 and 13.5, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; and a written solicitation will not be issued. This solicitation is a Request for Quotes (RFQ) and number ESQ030138 is assigned. FAR clause 52.212-1, Instructions to Offerors- Commercial, 52.212-2, Evaluation-Commercial Items, 52.212-3, Offeror Representations and Certifications-Commercial Items, 52.212-4, Contract Terms and Conditions-Commercial Items and 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders are applicable and this synopsis/solicitation incorporates all provisions and clauses in effect through Federal Acquisition Circular 2001-14. This is 100% set aside for small business concerns and the NAICS code is 423830. Quotes must be received by September 2, 2003, 10:00 a.m., Mountain Daylight Time. Quotes may be mailed to Bureau of Land Management, Attn: Lori Mading-MT935, 5001 Southgate Drive, PO Box 36800, Billings, MT 59107-6800 or faxed to Lori Mading at (406) 896-5020. For additional information please e-mail questions to Lori_Mading@blm.gov. Award to be made by 9/4/03 with delivery around 9/15/2003. BID SCHEDULE MATERIAL QUANTITY UNIT 2" Polyethelene Pipe (PE), SDR 11 160 psi 15 coils 1 1/2" Polyethelene Pipe (PE), SDR 9 200 psi 22 coils 1 1/2" Polyethelene Pipe (PE), SDR 11 160 psi 65 coils PE Reducer 2" x 1 1/2" IPS SDR 11, 160 psi 12 each 1 1/2" IPS PE 90 degree elbow SDR 11 160 psi 14 each PE Reducer, 2" x 1", IPS SDR 11, 160 psi 2 each PE Reducer, 1 1/2" x 1", IPS SDR 11, 160 psi 18 each PE Reducers, 1 1/2"" x 1", IPS SDR 9, 200 psi 5 each PE 1 1/2" Tee IPS, SDR 9, 200 psi 8 each PE 1 1/2" Tee IPS, SDR 11, 160 psi 23 each PE 2" Tee IPS, SDR 11, 160 psi 24 each Transition Fitting threaded end ,1 1/2" MPT Stainless 22 each Steel x1 1/2" IPS SDR 9, 200 psi Transition Fitting threaded end ,1 1/2" MPT Stainless 103 each Steel x1 1/2" IPS SDR 11, 160 psi Transition Fitting threaded end ,1 " MPT Stainless 17 each Steel x1" IPS SDR 11, 160psi Transition Fitting threaded end ,1" MPT Stainless 5 each Steel x1" IPS SDR 9,200 psi Transition Fitting threaded end ,2" MPT Stainless 5 each Steel x2" IPS SDR 11, 160 psi PVC Sewer Pipe 12" diameter, SDR 35 260 feet PVC Sewer Pipe 3" diameter, SDR 35 320 feet PVC 3" SCH 40 90 degree elbow 14 each Air Vent 25 each 1 1/2" Bronze Service Ball Valve 50 each 1 " Bronze Service Ball Valve 10 each 1"Float Valve 1" V 15 each Flow Regulator , 3/4" FNPT x 3/4" FNPT 13 each 2" Red Brass Coupling 2" 5 each 2" Red Brass Reducing Coupling 22 each 2" Red Brass Square Head Plug 25 each 4" Submersible pump including Motor/Starter 1 each 1 1/2" Pitless Adapter 1 each SPECIFICATIONS 1. 2" 160 psi Polyethelene Pipe (PE) NSF-pw APPROVED, meeting ASTM D2239 SDR 11 PE 3408 , 500 ft coils, black 2. 1/2" 200 psi Polyethelene Pipe (PE) NSF-pw APPROVED, meeting ASTM D2239 SDR 9 PE 3408 , 500 ft coils, black 3. 1 1/2" 160 psi Polyethelene Pipe (PE) NSF-pw APPROVED, meeting ASTM D2239 SDR 11 PE 3408 , 500 ft coils, black 4. PE Reducer 2" x 1 1/2" IPS SDR 11, 160 psi PE3408, ASTM D3261/D2513, NSF-pw approved 5. 1 1/2" IPS PE 90 degree elbow PE3408 SDR 11 160 psi, Meeting ASTM D2683/D2513 NSF-pw approved 6. PE Reducers, NSF-pw approved, PE 3408, 2" x 1" IPS SDR 11, 160 psi, Meeting ASTM D3261/D2513 7. PE Reducers, NSF-pw approved, PE 3408, 1 1/2" x 1" IPS SDR 11, 160 psi, Meeting ASTM D3261/D2513 8. PE Reducers, NSF-pw approved, PE 3408, 1 1/2"" x 1" IPS SDR 9, 200 psi, Meeting ASTM D3261/D2513 9. PE 1 1/2" Tee IPS, PE 3408 black ASTM D2683/D2513 SDR 9, 200 psi, NSF-pw approved 10. PE 1 1/2" Tee IPS, PE 3408 black ASTM D2683/D2513 SDR 11, 160 psi, NSF-pw approved 11. PE 2" Tee IPS, PE 3408 black ASTM D2683/D2513 SDR 11, 160 psi, NSF-pw approved 12. Transition Fitting threaded end ,1 1/2" MPT Stainless Steel x1 1/2" IPS SDR 9, PE3408, NSF-pw approved, 200 psi rated fitting 13. Transition Fitting threaded end ,1 1/2" MPT Stainless Steel x1 1/2" IPS SDR 11, PE3408, NSF-pw approved 160 psi rated fitting, Meeting ANSI B1 20.1 ASTM D2239 14. Transition Fitting threaded end ,1 " MPT Stainless Steel x1" IPS SDR 11, PE3408, NSF-pw approved, 160psi rated fitting, Meeting ANSI B! 20.1 ASTM D2239 15. Transition Fitting threaded end ,1" MPT Stainless Steel x1" IPS SDR 9, PE3408, NSF-pw approved,200 psi rated fitting, Meeting ANSI B! 20.1 ASTM D2239 16. Transition Fitting threaded end ,2" MPT Stainless Steel x2" IPS SDR 11, PE3408, NSF-pw approved, 160 psi rated fitting , Meeting ANSI B1 20.1 ASTM D2239 17. Sewer Pipe 12" daimeter, ASTM D3034, SDR 35 18. PVC Sewer Pipe 3" diameter ASTM D3034 SDR 35 19. 3" 90 degree elbow Meeting ASTM D3034 SDR 35 20. Air Relief Valve Bermad model 4415 or equal with these features. 2" mipt automatic continuous air bleed and vacuum relief type, 2 to 170 psi working pressure range with a cast iron body. Minimum vent discharge rate of 0.01 cu. Ft./sec. at 50 psi. 21. 1 1/2" Bronze Service Ball Valve, lead free, NSF-pw approved 300 psi minimum, full port threaded, fpt x fpt 22. 1 " Bronze Service Ball Valve, lead free, NSF-pw approved 300 psi minimum, full port threaded, fpt x fpt 23. Float Valve 1" V Standard Hudson Valve or equal with these features. 1" female thread NPT with a working operating pressure of 8 psi to 140 psi and a delivery flow rate shall be a minimum of 80 % of the flow supplied. Height of 5" and a diameter of 3.75" and made of non-corrosive material. 24. Flow regulator Dole GC or equal with these features. Shall be made of non-corrosive material with 3/4 FNPT x 3/4FNPT threads and a working pressure of 20 to 125 psi minimum , NSF -PW approved 6 regulators @ 6 gpm, 5 regulators @ 4 gpm, 2 regulators @ 3 gpm for a total of 13 regulators 25. Red Brass Coupling 2" Non lead NSF-pw approved 200 psi minimum WOG PSI 26. Red Brass Reducing Coupling 2" Non lead NSF-pw approved 200 psi minimum WOG 27. 2" Red Brass Square Head Plug, Non lead NSF-pw approved, MPT 28. 4" Submersible pump including Motor/Starter. Sta-Rite 1 hp 15 gpm submersible or equal, 115/220 single phase with TDH of 255 ft @ 10 gpm and not to exceed TDH of 315 ft@ 0 gpm.Stainless steel body and meet NSF-pw certification 29. 1 1/2" Maass Pitless Adapter 6J150 or equal. 1 1/2" Drop pipe size fitting a 6" diameter well casing NSF-pw approved. Shall be a monitor spool type unit lead free galvanized hot dipped processed spool piece. Manufactured with a threaded outlet through the well casing. Supporting a minimum load of 2000 lbs. *Delivery of Line Items 1, 2, 3, 17, 18 to Sonny Obrecht/Petrie Ranch 7 miles north of Turner, Montana 59542 *Delivery of all other line items to the Bureau Of Land Management Havre Field Station 1704 2nd ST West Havre, Montana 59501 phone (406) 265-5891
 

Web Link

Please click here to view more details.
(http://ideasec.nbc.gov/ecprod/owa/ec$cbd.sypfirstcount?P_SERVER_ID3=LM142201&P_OBJ_ID1=530074)
 

Place of Performance

Address: Havre, Montana area

Zip Code: 59501

Country: USA
 

Record

SN00403285-W 20030817/030815214400 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |