Loren Data's SAM Daily™

FBO DAILY ISSUE OF SEPTEMBER 07, 2003 FBO #0649
MODIFICATION

54 -- Purchase and replace water supply standpipe at Bloomington Park, Clinton Lake, Lawrence, Kansas

Notice Date

9/5/2003
 

Notice Type

Modification
 

Contracting Office

US Army Engineer District, Kansas City-Civil, ATTN: CENWK-CT, 700 Federal Building 60l East 12th Street, Kansas City, MO 64106-2896
 

ZIP Code

64106-2896
 

Solicitation Number

DACW41-03-Q-0073
 

Response Due

9/15/2003
 

Archive Date

11/14/2003
 

Point of Contact

Marianne Schrik, 816-983-3848
 

E-Mail Address

US Army Engineer District, Kansas City-Civil
(marianne.schrik@usace.army.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

NA This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation: proposals are being requested and a written solicitation will not be issued. Therefore, read this entire notice and the instructions herein. The solicitation is number DACW41-03-Q-0073 and is being issued as a request for quotes (RFQ). This acquisition will be set-as ide for small businesses. The NAICS Code is 332311. The size standard is $500 million. A Best Value Award will be made to the firm that is the lowest price technically acceptable. SCOPE OF WORK: Dismantling, removal and disposal of old existing standp ipe. The following is a list of known features: Lead based primer on outside surface of standpipe. Welded steel construction12-foot diameter and 110 feet tall. No known damage to existing concrete foundation.. Place on existing foundation a new tank w ith the following conditions, 11-foot minimum, 12 foot maximum diameter 107 feet tall minimum, 110 foot tall maximum. Tank will be of welded steel or bolted steel design by a manufacturer that has an active registration in ISO 9000. This contract will be considered a commercial purchase order for the purposes of the contracting tool. All Labor, equipment and materials needed for dismantling of old tank and erection of new tank. Tank structural design shall be per AWWA D100-96 or AWWA D103. Standard win d design shall be per AWWA D100-96 or AWWA D 103. Seismic design shall be per AWWA D100-96 or AWWA D103, with the exception of the foundation for which the Corps of Engineers accepts liability unless the foundation is damaged during demolition or constru ction. Tank shall have a roof deck, caged ladder, access control on ladder and OSHA railing around roof edge. All welding shall be to the latest edition of AWS using ASME or AWS certified welders. Welding procedures shall be qualified to ASME Section IX. Shell seams shall be full penetration using SAW (sub-arc welding) process with copper backup. Other seams may be made with GMAW (gas metal arc welding), SMAW (shielded metal arc welding), FCAW (flux-cored arc welding) or SAW (submerged arc welding pr ocess. Interior coating shall conform to NSF-61 requirements. Minimum thickness shall not be less than 5 mils. Exterior coating shall not be less than 3 mils. Corps personnel shall choose exterior color. Warranty shall be for a minimum period of 1 y ear after final acceptance by Corps of Engineer personnel. All site work shall be performed no earlier than October 15, 2003 and finished no later than April 1, 2004. All other specifications are listed in the Tank Specification. Quotations including, but not limited to, a cost proposal, shop drawings, product specifications, availability schedule, and warranty information shall be received by 12:00 NOON, September 15, 2003 to the following address: CONTRACTING DIVISION, ATTN: MARIANNE SCHRIK, ROOM 7 57 FEDERAL BUILDING, 601 E. 12TH STREET, KANSAS CITY, MISSOURI 64106. Proposals will be ranked on the following criteria: Price, Availability Schedule, Warranty, Operation, Maintenance. For quotation evaluation, items 1, 2, and 3 are the most important. Items 4 and 5 are of lesser importance. Technical questions can be presented to Daniel E. Wilson, P.E. at (816) 983-3642. Drawings related to this solicitation are posted to the internet at http://nwk-ebs.nwk.usace.army.mil/ebs/advertisedsolicitations. asp All offerors are to provide a price proposal to the following CLIN: ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 Stand Alone PipeFFPSee Scope of work for details ___________ NET AMT _________________ The following Federal Acquisition Regulations clauses are incorporated by reference: FAR 52.212-1, Instructions to Offerors – Commercia l Items (July 03), FAR 52.212-3, Offeror Representations and Certifications – Commercial Items (June 2003) , 52.212-4, Contract Terms and Conditions (Feb 2002), 52.212-5, Contract Terms and Conditions Required to Implement statues of Executive Orders –Commercial Items (June 2003), 52.243-1, Changes, Fixed Price (Apr 1984). Offerors can retrieve these clauses on the INTERNET AT WWW.ARNET.GOV. Questions about this requirement must be in writing and submitted by fax to the attention of Marianne Sch rik or Ron Vest at (816) 426-5169. Telephone inquiries are strongly discouraged. All inquiries must include the solicitation number, your full name, organization name, address, phone and fax numbers, and must be received by 12:00 (noon) Central Time, Sep tember 08, 2003. It is the responsibility of the Offeror to ensure the proposal is received by the date and time shown above. Prospective offerors shall notify this office of their intent to submit a proposal. It is the offeror’s responsibility to monitor this site for the release of amendments (if any). Responses to the RFQ must be received by 15 September 2003, no later than 12:00 Noon (Central Time) at the US Army Corps of Engineers, Attn: Contracting Division (Marianne Schrik), 757 Federal Bui lding, 601 E. 12th Street, Kansas City, MO 64106. All proposals should be marked with the Solicitation Number DACW41-03-Q-0073. Vendors not registered in the Central Contractor Registration (CCR) database prior to award will be ineligible for award. Point of Contact: Marianne Schrik (816) 983-3848 E-mail your questions to US Army Engineer District, Kansas City-Civil Works at Marianne.Schrik@usace.army.mil Place of Performance: Address: US Army Corps of Engineers, Kansas City District, Civil Works, ATTN: CENWK-CT, 757 Federal Building, 601 E. 12th Street, Kansas City, MO 64106. USA This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation: proposals are being requested and a written solicitation will not be issued. Therefore, read this entire notice and the instructions herein. The solicitation is number DACW41-03-Q-0073 and is being issued as a request for quotes (RFQ). This acquisition will be set-as ide for small businesses. The NAICS Code is 332311. The size standard is $500 million. A Best Value Award will be made to the firm that is the lowest price technically acceptable. SCOPE OF WORK: Dismantling, removal and disposal of old existing standp ipe. The following is a list of known features: Lead based primer on outside surface of standpipe. Welded steel construction12-foot diameter and 110 feet tall. No known damage to existing concrete foundation.. Place on existing foundation a new tank w ith the following conditions, 11-foot minimum, 12 foot maximum diameter 107 feet tall minimum, 110 foot tall maximum. Tank will be of welded steel or bolted steel design by a manufacturer that has an active registration in ISO 9000. This contract will be considered a commercial purchase order for the purposes of the contracting tool. All Labor, equipment and materials needed for dismantling of old tank and erection of new tank. Tank structural design shall be per AWWA D100-96 or AWWA D103. Standard win d design shall be per AWWA D100-96 or AWWA D 103. Seismic design shall be per AWWA D100-96 or AWWA D103, with the exception of the foundation for which the Corps of Engineers accepts liability unless the foundation is damaged during demolition or constru ction. Tank shall have a roof deck, caged ladder, access control on ladder and OSHA railing around roof edge. All welding shall be to the latest edition of AWS using ASME or AWS certified welders. Welding procedures shall be qualified to ASME Section IX. Shell seams shall be full penetration using SAW (su b-arc welding) process with copper backup. Other seams may be made with GMAW (gas metal arc welding), SMAW (shielded metal arc welding), FCAW (flux-cored arc welding) or SAW (submerged arc welding process. Interior coating shall conform to NSF-61 requir ements. Minimum thickness shall not be less than 5 mils. Exterior coating shall not be less than 3 mils. Corps personnel shall choose exterior color. Warranty shall be for a minimum period of 1 year after final acceptance by Corps of Engineer personne l. All site work shall be performed no earlier than October 15, 2003 and finished no later than April 1, 2004. All other specifications are listed in the Tank Specification. Quotations including, but not limited to, a cost proposal, shop drawings, pro duct specifications, availability schedule, and warranty information shall be received by 12:00 NOON, September 15, 2003 to the following address: CONTRACTING DIVISION, ATTN: MARIANNE SCHRIK, ROOM 757 FEDERAL BUILDING, 601 E. 12TH STREET, KANSAS CITY, MI SSOURI 64106. Proposals will be ranked on the following criteria: Price, Availability Schedule, Warranty, Operation, Maintenance. For quotation evaluation, items 1, 2, and 3 are the most important. Items 4 and 5 are of lesser importance. Technical que stions can be presented to Daniel E. Wilson, P.E. at (816) 983-3642. Drawings related to this solicitation are posted to the internet at http://nwk-ebs.nwk.usace.army.mil/ebs/advertisedsolicitations.asp All offerors are to provide a price proposal to the following CLIN: ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 Stand Alone PipeFFPSee Scope of work for details NET AMT The following Federal Acquisition Regulations clauses are incorporated by reference: FAR 52.212-1, Instructions to Offerors – Commercial Items (July 03), FAR 52.212-3, Offeror Representations and Certifications – Commercial Items (June 2003) , 5 2.212-4, Contract Terms and Conditions (Feb 2002), 52.212-5, Contract Terms and Conditions Required to Implement statues of Executive Orders –Commercial Items (June 2003), 52.243-1, Changes, Fixed Price (Apr 1984). Offerors can retrieve these clauses on the INTERNET AT WWW.ARNET.GOV. Questions about this requirement must be in writing and submitted by fax to the attention of Marianne Schrik or Ron Vest at (816) 426-5169. Telephone inquiries are strongly discouraged. All inquiries must include the s olicitation number, your full name, organization name, address, phone and fax numbers, and must be received by 12:00 (noon) Central Time, September 08, 2003. It is the responsibility of the Offeror to ensure the proposal is received by the date and time s hown above. Prospective offerors shall notify this office of their intent to submit a proposal. It is the offeror’s responsibility to monitor this site for the release of amendments (if any). Responses to the RFQ must be received by 15 September 20 03, no later than 12:00 Noon (Central Time) at the US Army Corps of Engineers, Attn: Contracting Division (Marianne Schrik), 757 Federal Building, 601 E. 12th Street, Kansas City, MO 64106. All proposals should be marked with the Solicitation Number DACW 41-03-Q-0073. Vendors not registered in the Central Contractor Registration (CCR) database prior to award will be ineligible for award. Point of Contact: Marianne Schrik (816) 983-3848 E-mail your questions to US Army Engineer District, Kansas City-Civil Works at Marianne.Schrik@usace.army.mil Place of Performance: Address: US Army Corps of Engineers, Kansas City District, Civil Works, ATTN: CENWK-CT, 757 Federal Building, 601 E. 12th Street, Kansas City, MO 64106. USA
 

Web Link

Link to FedBizOpps document.
(http://www.eps.gov/spg/USA/COE/DACA41/DACW41-03-Q-0073/listing.html)
 

Place of Performance

Address: Clinton Lake Project Office - Bloomington Park 872 N. 1402 RD. Lawrence KS

Zip Code: 66049-9048

Country: US
 

Record

SN00428208-F 20030907/030905221236 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |