SOURCES SOUGHT
95 -- THE MANUFACTURE AND FABRICATION OF PYROLYTIC CARBON (SN-GRADE OR EQUIVELENT) PRODUCTS
- Notice Date
- 12/23/2003
- Notice Type
- Sources Sought
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
- ZIP Code
- 44135
- Solicitation Number
- 03-C3L-001
- Response Due
- 1/30/2004
- Archive Date
- 12/23/2004
- Point of Contact
- Michael Kaszyca, Contract Specialist, Phone (216) 433-2799, Fax (216) 433-2480, Email Michael.Kaszyca@grc.nasa.gov
- E-Mail Address
-
Email your questions to Michael Kaszyca
(Michael.Kaszyca@grc.nasa.gov)
- Description
- All responses shall be submitted to Michael Kaszyca (phone: 216-433-2799) no later than January 30, 2004. NASA/GRC is hereby soliciting information about potential sources for future efforts in the manufacture and fabrication of Pyrolytic Carbon (SN-Grade or equivalent) products. Examples of current efforts include: 1.The production of screen blanks, accelerator blanks, and blank stiffeners from Pyrolytic Carbon (SN-Grade or Equivalent). The screen blanks are from a single sheet of Pyrolytic Carbon (SN-Grade or Equivalent) and are 0.059 inches thick and 38 inches long by 18 inches wide (3 Required). The accelerator grids are from a single sheet of Pyrolytic Carbon (SN-Grade or Equivalent) and are 0.079 inches thick and 38 inches long by 18 inches wide (3 Required). The grid stiffeners are Pyrolytic Carbon (SN-Grade or Equivalent) rods with 0.50 inch square, cross-section and are 36.5 inches in length (8 Required) and 18.0 inches in length (8 Required). 2. The fabrication of a screen grid and accelerator grid from Pyrolytic Carbon (SN-grade or equivalent) and grid stiffeners in accordance with the following specifications: Screen Grid: 1 required Single sheet Pyrolytic Carbon, 0.059? thick, 38 inches long by 18 inches wide. Between 2300 and 3000 screen holes, 0.39? i.d., hexagonally arranged. Open area fraction of 66% Accelerator Grid: 1 required Single sheet Pyrolytic Carbon, 0.079? thick, 38 inches long by 18 inches wide. Between 2300 and 3000 accelerator holes, 0.23? i.d., hexagonally arranged. Open area fraction of 24% Grid Stiffeners: Pyrolytic carbon rods with 0.50? square, cross-section ? 36.5 inch length: 4 required ? 18.0 inch length: 4 required No solicitation exists; therefore, do not request a copy of the solicitation. If a solicitation is released it will be synopsized in FedBizOpps and on the NASA Acquisition Internet Service. It is the potential offeror?s responsibility to monitor these sites for the release of any solicitation or synopsis. Vendors having the capabilities necessary to meet or exceed the stated requirements are invited to submit appropriate documentation, literature, brochures, and references which must include the following: name and address of firm, size of business; average annual revenue for past 3 years and number of employees; ownership; whether they are large, small, small disadvantaged, 8(a), HUBZone, and/or woman-owned; number of years in business. All questions should be directed to: Michael Kaszyca at phone number 216-433-2799. Please advise if the requirement is considered to be a commercial or commercial-type product. A commercial item is defined in FAR 2.101. This synopsis is for information and planning purposes and is not to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. Respondents deemed fully qualified will be considered in any resultant solicitation for the requirement. The Government reserves the right to consider a small business or 8(a) set-aside based on responses hereto. Please reference 03-C3L-001 in any response.
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=22#108441)
- Record
- SN00495276-W 20031225/031223212700 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |