SOURCES SOUGHT
68 -- CHEMICAL PRODUCTS AND PAINT
- Notice Date
- 2/23/2004
- Notice Type
- Sources Sought
- NAICS
- 325998
—
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, Engineering Field Division, Pacific, Acquisition Department, Code ACQ0262, 258 Makalapa Drive, Suite 100, Pearl Harbor, HI, 96860-3134
- ZIP Code
- 96860-3134
- Solicitation Number
- ACQ0262:MY
- Response Due
- 3/11/2004
- Point of Contact
- Melvin Yoshimura, Contracting Officer, Phone (808) 474-5406, Fax (808) 474-8908,
- E-Mail Address
-
yoshimurams@efdpac.navfac.navy.mil
- Description
- The Government intends to procure under, only one responsible source and no other suppliers or service will satisfy agency requirements, the following items: 1. CHLOR TEST chloride test kit manufactured by CHLOR RID International, Inc. a. Kit contains all materials, supplies, tools and instructions for field testing and on-site quantitative evaluation; b. Kit extract solution is acidic, factory pre-measured, pre-packaged, and of uniform concentration; c. Kit components and solutions are mercury free and environmentally friendly; d. Kit contains a factory sealed titration device; e. Kit contains new materials and solutions for each test; f. Test container (vessel, sleeve, cell. etc.) creates a sealed, encapsulated environment during chloride ion extraction; g. Test container is suitable for testing the following steel surfaces: horizontal (up-down configuration), vertical, flat, curved, smooth, pitted, and rough; h. Kit uses test container, with resulting chloride ion extract solution, as the titration container; i. Chloride ion concentration is directly measured in micrograms per square centimeter without using either conversion charts or tables. 2. CHLOR TEST CSN sulfate test kit manufactured by CHLOR RID International, Inc. a. Kit contains all materials, supplies, tools and instructions for field testing and on-site quantitative evaluation; b. Kit extract solution is acidic, factory pre-measured, pre-packaged, and of uniform concentration; c. Kit components and solutions are mercury free and environmentally friendly; d. Kit contains an electronic colorimetric device that reads from 1 to 100 ppm. Visual color (turbidity) comparators are not acceptable; e. Kit contains new materials and solutions for each test; f. Extract container (vessel, sleeve, cell. etc.) creates a sealed, encapsulated environment during ion extraction; g. Extract container is suitable for testing the following steel surfaces: horizontal (up-down configuration), vertical, flat, curved, smooth, pitted, and rough; h. Sulfate ion concentration is directly measured in micrograms per square centimeter without using either conversion charts or tables. 3. CHLOR RID DTS manufactured by CHLOR RID International, Inc. CHOR RID DTS has a low ph of 3 to 4, which is required to effectively remove salts. CHLOR RID DTS does not leave a film or residue over existing salt that may mask salt indication readings during testing. Salt remover system is carefully engineered in its development to ensure its effectiveness. 4. Modified Fluoropolyol MODFPWC-50 available from 21st Century Coating, Inc. Modified Fluoropolyol MODFPWC-50 is a component used in the Modified PTFE-Pigmented Fluoropolyurethane topcoat. This component was designed by the Naval Research Laboratory, Washington, DC and is under a no-cost license. Firms meeting the requirements described in this announcement are invited to submit complete information and specification. The submittal or delivery address is Commander, Code ACQ0262, Attn: Mailroom (CMP0161), PACNAVFACENGCOM, 258 Makalapa Drive, Suite 100, Pearl Harbor, HI 96860-3134. This address is for all deliveries, including US Mail, courier service or personal delivery services; no other address is acceptable. The delivery address is inside a military installation, therefore, strict securities measures are in force; anticipate delays. Firms responding to this announcement by Thursday, 2:00 P.M. (HST), March 11, 2004 will be considered.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DON/NAVFAC/N62742R/ACQ0262:MY/listing.html)
- Place of Performance
- Address: All Areas Under the Cognizance of the Pacific Division, Naval Facilities Engineering Command (PACNAVFACENGCOM) Areas.
- Zip Code: 96860
- Zip Code: 96860
- Record
- SN00528965-F 20040225/040223225450 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |