SPECIAL NOTICE
51 -- 5120-01-136-0954
- Notice Date
- 3/23/2004
- Notice Type
- Special Notice
- NAICS
- 332212
— Hand and Edge Tool Manufacturing
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131
- ZIP Code
- 64131
- Solicitation Number
- 5120-01-136-0954
- Response Due
- 3/26/2004
- Archive Date
- 4/10/2004
- Point of Contact
- Celeste Gorman, Contracting Officer, Phone 816-926-2438, Fax 816-823-3109, - Celeste Gorman, Contracting Officer, Phone 816-926-2438, Fax 816-823-3109,
- E-Mail Address
-
celeste.gorman@gsa.gov, celeste.gorman@gsa.gov
- Description
- 5130-01-136-0954 UI: EA QTY 28 (ONE ORDER FOR 4 GOING TO LOUISVILLE TN AND ONE ORDER FOR 24 GOING TO EASTON MD)DRILL, HAMMER, ELECTRIC, PORTABLE: DESCRIPTION Technical Description: Voltage - 115 VAC nominal, Input Power - 1300 Watts minimum, Frequency - 50 to 60 Hertz, Hammering Speed Under Load Full Speed - 2770 impacts/minute minimum Service Indicator Light, Speed 1 Under Load - 282 rpm nominal, Speed 2 Under Load - 200 rpm nominal, Single Impact Energy Full Speed - 6.1 ft-lbs nominal, Single Impact Energy Half Speed - 3.1 ft-lbs nominal, Drilling Performance - Up to 7.3 cu. in./min. with 1 inch bit minimum, Chiseling Performance - Up to 35.1 cu. in./min. minimum Applications - For drilling into and breaking concrete, Variable Speed Switch Grounded, Drilling Modes - Hammer Only and Hammer & Rotation, Hammering Speed Under Load Half Speed - 1965 impacts/minute minimum, Optimum Drilling Range - Concrete - 7/8 inch to 1-3/8 inch nominal, Speed Range Under Load - Power setting 1 - 0 to 200 rpm; Power setting 2 - 0 to 282 rpm, Weight - 17.4 pounds maximum, Accessories - 1/2 to 1-9/16 inch masonry bits, 1-3/4" to 6" core bits; 1-1/2" to 3-3/8" cruciform bits. Chisels - flat, pointed, spoon, scaling, bushing tool. Features - Active Torque Control (ATC) to reduce operator's risk of injury. Carrying Case; 13 ft. Supply Cord; Grease; Cleaning Cloth; and Operating Instructions. ITEM MARKING Mark each item in a permanent and legible manner with manufacturer's part number and name or identifying symbol. PACKAGING Packaging in accordance with standard commercial practice. PACKING The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200, or ECT 32. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129P, dated 15, December, 2002, as applicable. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe). Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15. AWARD WILL BE BASED ON PRICE AND DELIVERY. RESPONSES ARE DUE BY NOON ON 3/26/2004. NO LATE OFFERS WILL BE ACCEPTED. Buy American Act applys.
- Record
- SN00552621-W 20040325/040323212324 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |