SOLICITATION NOTICE
Z -- Repair Hangar/Maintenance Bay Floors
- Notice Date
- 5/12/2004
- Notice Type
- Solicitation Notice
- NAICS
- 238330
— Flooring Contractors
- Contracting Office
- Department of the Air Force, Air Combat Command, 4 CONS, 1695 Wright Brothers Ave, Seymour Johnson AFB, NC, 27531
- ZIP Code
- 27531
- Solicitation Number
- FA4809-04-R0014
- Response Due
- 5/17/2004
- Archive Date
- 6/1/2004
- Point of Contact
- Jennifer Mapp, Contract Specialist, Phone 919-722-5409, Fax 919-722-5404, - David Comer, Contract Specialist, Phone 919-722-5607, Fax 919-722-5424,
- E-Mail Address
-
jennifer.mapp@seymourjohnson.af.mil, david.comer@seymourjohnson.af.mil
- Description
- Work consists of providing all labor, supplies, materials, supervision, transportation, equipment, and all else necessary to complete Repair Hangar/Maintenance Bay Floors. The work involved includes, but is not limited to, remove and dispose of existing floor coatings on hangar and/or bay floors, and prepare surface to receive new coating. Any damage to the concrete surface and/or joints during stripping shall be repaired by the Contractor at no expense to the government. Damage is defined as spalling or cracking, and is not intended to include shot blast marks or overlap lines. Some Hangar Floors may contain metal shake. Water based materials shall not be used to prep these floors. Protable equipment and materials in the hangar and/or maintenance bay shall be relocated by government personnel prior to the contractor beginning work. Existing air handling units at floor level will remain. Contractors shall protect intakes from paint, dust, and coating fumes during application. Apply a chemical resistant urethane finish system to the floor. Work included marking red line restricted areas, yellow tow lines, and other markings as indicated. Lines shown on each delivery order?s plans are for reference only ? exact location of the lines shall be field verified by the Contracting Officer?s representative and the Contractor. Existing lines may contain Lead Based Paint and shall be removed accordingly. The contractor shall paint one ECP sign at all of the entry points in each hangar floor. ?ECP? shall be black lettering and approximately 6 inches high. Additionally, ?Restricted Area? signs shall be painted around the perimeter of each bay. Each sign shall be approximately 18? wide and 14 ? high. The word ?WARNING? shall be painted red using all capital letters. All other lettering shall be black with the background painted in white. The contractor shall use a paint that is compatible with the final CRU coating. Locations and exact sizes of signs will be provided with each task order. All work shall be in strict compliance with the specifications of the contract and specifications and drawings for each task order. This will be a Firm-Fixed-Price Indefinite-Delivery/Indefinite-Quantity (IDIQ) construction contract. The performance period is one (1) base year with two (2) option years. The guaranteed minimum contract amount including all options is $100,000.00 and the maximum contract amount is $500,00.00. The minimum amount per task order is $10,000.00 and the maximum amount per task order is $100,000.00. This action is being considered for 100 percent set-aside for HUBZone or Service Disabled Veteran Owned Small Business (SDVOSB) concerns. Interested HUBZone or SDVOSB concerns should indicate interest to the Contracting Officer, in writing, as early as possible but not later than 5 calendar days after the date of this notice. As a minimum the following information is required: (a) a positive statement of your intention to bid on this contract as a prime contractor; (b) evidence of recency and experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, and points of contacts and telephone numbers; (c) evidence of bonding capability to the maximum magnitude of the project to include both single and aggregate totals. All of the above must be submitted in sufficient detail for a decision to be made on availability of interested and qualified HUBZone or SDVOSB concerns. All interested concerns must be registered in Pro-Net. Failure to submit all information requested will result in a contractor not being considered as an interested and qualified HUBZone or SDVOSB concern. A decision on whether this requirement will be pursued as a HUBZone or SDVOSB set-aside or on an unrestricted basis will be posted on EPS within 2 calendar days after the 5 calendar days have expired. The project magnitude is estimated to be between $250,000.00 and $500,000.00. The applicable North American Industry Classification System (NAICS) code is 238330 with a small business size standard of $12,000,000.00. The successful contractor will be selected using Performance Price Tradeoff (PPT) procedures, resulting in the Best Value to the Government. Past performance is significantly more important than price. It is anticipated the solicitation will be issued electronically on or about 9 Jun 04 on the Federal Business Opportunities web page at http://www.eps.gov. Paper copies will not be available. Once the solicitation is posted, it is incumbent upon the interested parties to review this site frequently for any updates/amendments to any and all documents. It is anticipated that the following viewers will be needed to view the solicitation: Microsoft Word (.doc), Adobe Acrobat Reader (.pdf), WinZip (.zip or .exe.), MaxView/SourceView.exe, Autocad. More information concerning these viewers can be found on the EPS website. Note: Any prospective contractor must be registered in the Central Contractor Registration (CCR) in order to be eligible for award. Registration requires applicants to have a DUNS number from Dun and Bradstreet. Registration may take up to three weeks to process. Recommend registering immediately in order to be eligible for timely award. Primary POC is Jennifer Mapp at (919) 722-5409; email: jennifer.mapp@seymourjohnson.af.mil. A small business subcontracting plan (with separate goals with small business, HUBZONE small business, small disadvantaged business, and woman-owned business concerns) will be required and accepted by the government prior to and included in the award of this project if it is made to a Large Business concern.
- Place of Performance
- Address: Seymour Johnson AFB, NC
- Zip Code: 27531
- Country: USA
- Zip Code: 27531
- Record
- SN00584547-W 20040514/040512211918 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |