SOLICITATION NOTICE
34 -- COMPUTER NUMERICAL CONTROL (CNC) 15 BENCH TOP TUBE BENDER, ACCESSORIES & TOOLING
- Notice Date
- 5/12/2004
- Notice Type
- Solicitation Notice
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- NASA/Goddard Space Flight Center, Code 210.M, Greenbelt, MD 20771
- ZIP Code
- 20771
- Solicitation Number
- 4200056954-GBZ
- Response Due
- 5/27/2004
- Archive Date
- 5/12/2005
- Point of Contact
- Sandra R Harrell, Contract Specialist, Simplified Acquisition, Phone (301) 286-3723, Fax (301) 286-1720, Email sharrell@pop500.gsfc.nasa.gov - William A. Hatchl, Procurement Manager, Phone (301) 286-6843, Fax (301) 286-1720, Email William.A.Hatchl@nasa.gov
- E-Mail Address
-
Email your questions to Sandra R Harrell
(sharrell@pop500.gsfc.nasa.gov)
- Description
- NASA/GSFC has a need for a Computer Numerical Control (CNC) 15 Bench Top Tube Bendor machine with the following requirements: 1. Capable of bending ??, 3/8? OD CRES and titanium tubing. Capability to bend ?? OD is desirable. 2. Accuracy: DBB <.005?, DOB <.1 deg, POB <.1 deg 3. Hitch tube feed available. 4. Portability. Weight under 1000 lbs. Lower is better if bending accuracy and durability is not compromised. Self contained except for data connections, electricity (120 VAC a desirable), and shop air. 5. Machine is all electric or pneumatic (no hydraulic fluid) for compatibility with clean room environments. 6. External computer interface and software available. Software must be capable of accepting a variety of tube bend input formats, reverse order bending, machine to tube interference checking. 7. Setup, maintenance, and training available. Desirables: 1. Long heritage in tube benders. 2. 120 VAC. 3. Demonstration available. 4. Off the shelf repair components. 5. Deliverable NLT August 1, 2004. NASA/GSFC intends to purchase the following items from Pines Manufacturing, Inc., Westlake, Ohio: Qty: 1 EA Pines Model CNC 15 Bench Top Tube Bender Qty: 1 EA Workstation Qty: 1 EA 1/4" collet insert Qty: 1 EA 3/8" collet insert Qty: 1 EA Bend Die, .250"OD x 1.0" CLR, .75" GRIP, 32 GRIT BLAST Qty: 1 EA Bend Die, .250"OD x 1.25" CLR, .75" GRIP, 32 GRIT BLAST Qty: 1 EA Clamp Die, .250"OD x .75" LONG, 32 GRIT BLAST Qty: 1 EA Pressure Die, .250"OD x 6.0" LONG, 32 GRIT BLAST Qty: 1 EA Bend Die, .375"OD x 1.25" CLR, 1.125" GRIP, 32 GRIT BLAST Qty: 1 EA Bend Die, .375"OD x 1.5" CLR, 1.125" GRIP, 32 GRIT BLAST Qty: 1 EA Bend Die, .375"OD x 1.75" CLR, 1.125" GRIP, 32 GRIT BLAST Qty: 1 EA Clamp Die, .375"OD x 1.125" LONG, 32 GRIT BLAST Qty: 1 EA Pressure Die, .375"OD x 8.0" LONG, 32 GRIT BLAST Pines Manufacturing, Inc. is the only vendor able to offer a combination of basic machine, accessories, and tooling which was satisfactory with all of the Requirements and Desirables listed. The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:30 p.m. local time on May 27, 2004. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. An Ombudsman has been appointed. See NASA Specific Note "B".
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=51#110057)
- Record
- SN00584903-W 20040514/040512212536 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |