MODIFICATION
49 -- Hydraulic Test Stand
- Notice Date
- 6/25/2004
- Notice Type
- Modification
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- DHS - Direct Reports, United States Coast Guard (USCG), Commanding Officer, USCG Aircraft Repair & Supply Center, HU25, HH65, H60J, C130, EISD, 130J or Support Procurement Building 79, 75, 79, 78, 78, 19 or 63, Elizabeth City, NC, 27909-5001
- ZIP Code
- 27909-5001
- Solicitation Number
- HSCG38-04-Q-500023
- Response Due
- 7/23/2004
- Archive Date
- 8/7/2004
- Point of Contact
- Denise Hall, EISD Purchasing Agent, Phone 252-334-5323, Fax 252-335-6849,
- E-Mail Address
-
DHall@arsc.uscg.mil
- Description
- Amendment 0001: RFQ HSCG38-04-Q-500023 is amended and provides the following additional specification information: Facility inputs will be within 10 feet of the proposed test stand site location at ARSC. The term "Manual/Remote in several areas" is further specified to mean Manual ? as in hands on adjustable at the test stand. Remote ? as control adjustment from a computer control station outside of the test stand area. Test Stand return pressure regulation is not required but requires a case drain relief adjustable pressure of 0 ? 200 psi. The case drain remote pressure is 150 psi. The horsepower and torque requirement for the drive shall be sufficient to run the entire test set as stated. The government will provide a forklift for off-loading the equipment upon delivery. The closing date and time for receipt of quotes is extended until 23 July 2004, 4:00 p.m. EDST.****
- Record
- SN00610042-W 20040627/040625230404 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |