SOLICITATION NOTICE
47 -- HDPE PIPE
- Notice Date
- 6/29/2004
- Notice Type
- Solicitation Notice
- Contracting Office
- Klamath Basin Area Office 6600 Washburn Way Klamath Falls OR 97603
- ZIP Code
- 97603
- Solicitation Number
- 04SQ250013
- Response Due
- 7/13/2004
- Archive Date
- 6/29/2005
- Point of Contact
- Jeanie Sawyer Contracting Officer 5418802558 JSawyer@MP.USBR.GOV;
- E-Mail Address
-
Email your questions to Point of Contact above, or if none listed, contact the IDEAS EC HELP DESK for assistance
(EC_helpdesk@NBC.GOV)
- Small Business Set-Aside
- Total Small Business
- Description
- HDPE Canal Pipe and fittiings All pipes and fitting materials shall be high-density polyethylene (HDPE) and shall meet all structural requirements of AASHTO M294 Type 'S' material. 1. All joints shall be bell and spigot gasketed joints, shall be silt-tight and shall meet ASTM F-477 requirements, be non-modified, and shall be installed by the pipe manufacturer. 2. Pipe quantities are as follows: 180 lineal feet of 30 inch pipe. 1300 lineal feet of 24 inch pipe 100 lineal feet of 18 inch pipe 3. Pipe Fittings are as follows: a. 42 inch diameter by 66 inch high HDPE corrugated pipe sump basins without a bottom or grate. Each sump basin shall have two 30 inch PE (Plain End) stubs located 180 degrees from each other with the centerline of the 30 inch pipe being located 27 inches from the bottom of the sump. Each 30 inch pipe stub shall extend a minimum of 18 inches from the side of the sump. Quantity = 5. b. 42 inch diameter by 66 inch high HDPE corrugated pipe sump basins without a bottom or grate. Each sump basin shall have one 30 inch PE and one 30 inch bell stub located 180 degrees from each other with the centerline of the 30 inch stubs being located 27 inches from the bottom of the sump. Each 30 inch pipe stub shall extend a minimum of 18 inches from the side of the sump. Quantity = 4. c. 30 inch Marmac couplers or equivalent. Quantity = 23. d. 42 inch diameter by 60 inch high HDPE corrugated pipe sump basins without a bottom or grate. Each sump basin shall have two 24 inch PE (Plain End) stubs located 180 degrees from each other with the centerline of the 24 inch pipe stubs being located 24 inches from the bottom of the sump. Each 24 inch pipe stub shall extend a minimum of 18 inches from the side of the sump. Quantity = 9 e. 42 inch diameter by 60 inch high HDPE corrugated pipe sump basins without a bottom or grate. Each sump basin shall have one 24 inch PE and one 24 inch bell stub located 180 degrees from each other with the centerline of the 24 inch stubs being located 24 inches from the bottom of the sump. Each 24 inch pipe stub shall extend a minimum of 18 inches from the side of the sump. Quantity = 10. f. 24 inch Marmac couplers or equivalent. Quantity = 40. g. 24 inch by 12 inch HDPE reducing tee, Bell by PE by PE. Quantity = 15. h. 24 inch, 22.5 degree HDPE elbow bell by PE. Quantity = 5. i. 24 inch, 45 degree HDPE elbow bell by PE. Quantity = 1. j. 24 inch by 12 inch HDPE reduction tee, Bell by PE by PE. Quantity = 10. k. 30 inch, 22.5 degree elbow, Bell by PE. Quantity = 4.
- Web Link
-
Please click here to view more details.
(http://ideasec.nbc.gov/j2ee/announcementdetail.jsp?serverId=BR142520&objId=111796)
- Place of Performance
- Address: DELIVERED TO: KLAMATH IRRIGATION DISTRICT 6640 K.I.D. LANE KLAMATH FALLS, OR 97603
- Zip Code: 97603
- Country: USA
- Zip Code: 97603
- Record
- SN00612194-W 20040701/040629212418 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |