SOLICITATION NOTICE
58 -- Hand Held Gama-ray Back scatter Dection Equipment
- Notice Date
- 7/8/2004
- Notice Type
- Solicitation Notice
- NAICS
- 454390
— Other Direct Selling Establishments
- Contracting Office
- DHS - Border and Transportation Security, Customs and Border Protection, Procurement Division, 1300 Pennsylvania Avenue, N.W., Room 1310 NP, Washington, DC, 20229
- ZIP Code
- 20229
- Solicitation Number
- HSBP1004P5574
- Response Due
- 7/23/2004
- Archive Date
- 8/7/2004
- Point of Contact
- Clyde Lohere, Contracting Officer, Phone 202/344-1232, Fax 202/344-1254,
- E-Mail Address
-
clyde.lohere@dhs.gov
- Description
- The purpose of this source sough RFI is for the government to determine if any company other than Campbell Security Equipment Company can meet the governments mandatory requirements for Hand-held Contraband Detection equipment defined in this RFI. All vendors responding to this RFI shall provide the salient caricaturists for each item identified below in order for the government to properly evaluate the item to determine that is equal to the equipment defined in this document. Vendors shall provide this information all items identified. No partial responses will be accepted. All items proposed shall be off the shelf. This equipment shall use Gamma-ray backscatter technology with a radioactive Source of Barium 133 not to exceed 10 uci. The depth of scan range up to seven inches. Detail description of the equipment to is defined below. The salient caricaturists for this equipment are not attached. This Equipment will be used by Customs and Border Protection (CBP) inspectors to locate hidden contraband inside an object. It will also aid the CBP inspectors in determining that no contraband is present. DESCRIPTION OF BRAND NAME OR EQUAL BUSTER AND CONTRABAND DETECTION KITS Campbell Security Equipment Company (CSECO) is the only responsible, commercially available source of the Buster and Contraband Detection Kit. CSECO is the designer, manufacturer, and patent holder of the complete model K-910B Buster. Customs and Border Protection (CBP) inspectors have been using the model K-910B Buster since the early 1980?s. The Buster?s unique technology has proven itself to be an invaluable tool in detecting contraband in the hidden compartments non-intrusively. 1. The Buster uses Gamma-ray backcatter technology that utilizes a radioactive source of Barium 133 (with half life of 11 years) with less than 10uCi radioactivity, in combination with a Cadmiun telluride sold state detector to locate anomalous densities concealed behind homogeneous surfaces. The Applied Technology Division holds a Customs? license with the Nuclear Regulatory Commission for use of the CESCO made Buster with its Barium 133 source. A Buster kit consists K910B Buster, K9 Holster, and K9-150 Remote Display with 4? long cable, operator?s manual, and option K-150B buster-on-a-stick (BOAS) Extension Pole. 2. The contraband detection kit consists of a unique array of tools assist CBP inspectors to located hidden contraband. The tools consist of: K910B Buster kit: Same as above. FO-30-xx Fiberscopes are designed for surveillance applications, under ambient light condition it can be used in looking under doorway or through small access holes. For looking in the dark spaces, such as car doors, fuel tanks air conditioning ducks, and small hidden spaces, then can be connected with Hi-light handle and remote light source: There are two models: 1. FO-30-10: 6mm diameter, 1.5 meter (60?) or 2.0 meter (80?) long, 2-way Articulation fiberscope,18,300 leached image bundle with tungsten braid. 2. FO-30-20: 8mm diameter, 1,5 meter (60?) or 2.0 meter (80?) long, 4-way Articulation fiberscope,18,300 leached image bundle with tungsten braid. LRF-1 Laser Range Finder utilizes laser technology forming a narrow beam to measure the distance range from 0.2 meter (0.7?) to 200 meter (650?) with an accuracy of +/- 3 mm (0.1?), and designed to enables measurements in dark room and with low daylight. It is used to measure interior dimensions of cargo containers and truck for the detection of false compartments. The uniqueness of the Laser Ranger Finder is its ability to take measurements inside loaded containers through small openings. P-41 Expendable Probe Kit is a 3/8? diameter heavy duty stainless steel expendable inspection probe. The kit including 5? tip with hole and grooves, 4 each 12? ext sections, ?? anodized alum handle with lanyard, 3/16? diameter by 12? stainless steel ?Slimline? probe, all in nylon carrying case. PN-30 Pocket Pencil Probe is a pocket pencil body with retractable 4? stainless steel sampling probe. PN-30N Needles are replacement needles for PN-30 Pocket Probe. Base Period (from September 27, 2004 thru September 30, 2005) Item Equipment Model Estimated QTY/Unit Unit Price Total cost 1 K910B Buster 50 2 K9 - Holster for Buster 30 3 K9 - 150B Buster-on-a-stick Extension Pole (5' -- 8') 5 4 K9 - 150B Buster-on-a-stick Extension Pole (7' -- 12') 5 5 K9 - 150B Buster-on-a-stick Extension Pole (9' -- 16') 5 6 K9 - 150 Remote Display 5 7 FO-10-1.5 (60") Fiberscope 5 8 FO-10-2.0 (80") Fiberscope 5 9 FO-20-1.5 (60") Fiberscope 5 10 FO-20-2.0 (80") Fiberscope 5 11 CT-30-10-1.5 Contract Detection Kit 5 12 CT-30-10-2.0 Contract Detection Kit 5 13 CT-30-20-1.5 Contract Detection Kit 5 14 CT-30-20-2.0 Contract Detection Kit 5 15 P-41 Expandable Probe Kit 5 16 PN-30 Pocket Probe 5 17 PN-30N Needles 5 18 LRF-1 Laser Range Finder 5 Total -
- Place of Performance
- Address: Various
- Record
- SN00616753-W 20040710/040708211527 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |