SOLICITATION NOTICE
58 -- MKVII LASER RANGE FINDER SPARE PARTS
- Notice Date
- 8/11/2004
- Notice Type
- Solicitation Notice
- Contracting Office
- N00164 300 Highway 361, Building 64 Crane, IN
- ZIP Code
- 00000
- Solicitation Number
- N0016404Q0328
- Response Due
- 8/26/2004
- Archive Date
- 9/25/2004
- Point of Contact
- MS PHYLLIS HOGGATT 812-854-3688
- Description
- This synopsis is being posted to both the Federal Business Opportunities(FBO) page located at http://www.eps.gov and the Navy Electronic Commerce on Line(NECO) site located at http://www.neco.navy.mil. While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by the NSWC Crane. This is a combined synopsis/solicitation for noncommercial items prepared in accordance with the format in FAR Subpart 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number N00164-04-Q-0328 applies and is issued as a request for quotation (RFQ). The set aside for small business has been dissolved and the government intends to negotiate with only one source. Litton Systems Inc., 2787 S. Orange Blossom Trail, Apopka, FL 32703 in accordance with FAR 6.302 (a)(ii). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-23 as well as DCN 20040608. The North American Industry Classification System (NAICS) Code is 333314 and the business size standard is 500 employees. This requirement is as follows: CLIN 0001 ? Qty 25, MKVII neck strap, ! P/N: N-17 black; CLIN 0002 ? Qty 25, MKVII Eye Cup, P/N; MFT18245-9; CLIN 0003 ? Qty 25, MKVII connector Cap, P/N: L20112-2; CLIN 0004 ? Qty 25, MKVII switch knob, P/N: MFT17825-3; CLIN 0005 ? Qty 25, MKVII Battery Compartment Door, P/N: MFT19232-29; CLIN 0006 ? Qty 25, MKVII Front Door, P/N: MFX10014-1; CLIN 0007 ? Qty 25, MKVII Shaft Thumb Screw, P/N: MF11162-7; CLIN 0008 ? Qty 25, MKVII Ball Bearing, P/N: AK-3; CLIN 0009 ? Qty 25, MKVII Spring, P/N: C0120-020250-S; CLIN 0010 ? Qty 25, MKVII Pin, P/N: MS16555-608; CLIN 0011 ? Qty 15, MKVII computer, P/N: MFT11012-1; CLIN 0012 ? Qty 15, MKVII Remote Cable, P/N: MFT19000-9; CLIN 0013 ? Qty 15, MKVII Voltage Reg. Cable, P/N: MFT11011-9; CLIN 0014 ? Qty 15, MKVII Comm. Cable, P/N: 426-0141-0101; CLIN 0015 ? Qty 20, MKVII PLGR cable, P/N: MFT11010-1; CLIN 0016 ? Qty 25, MKVII Operators?s Manual, P/N; MFT60000-17. Delivery is required F.O.B. Destination within 120 days after award. Final inspection will be at NSWC Crane. Sele! ction for award will be based on past performance and price. Quotes that are non-compliant with any material requirement of this solicitation may be rejected without further consideration for award. All responsible sources may submit a quote that will be considered by the Agency. A Firm-Fixed Price purchase order will be awarded using Simplified Acquisition Procedures. The following provisions and clauses apply: 52.213-4 (incorporating 52.247-34; 52.204-6; 52.209-6; 52.211-5; 52.211-14 (A70/DO); 52.211-15; 52.222-19; 52.222-22; 52.232-23; 52.242-15; 52.242-17; 52.243-1; 52.246-1; 52.246-16; 52.252-2; 252.204-7001; 252.204-7003; 252.204-7004 Alt A; 252.225-7001; 252.225-7002; 252.225-7005; 252.225-7031; 252.225-7043; 252.243-7001; 252.247-7023 Alt III). NOTE: The following provisions with a ?Fill-in? MUST be filled out completely and submitted with the offer: 52.207-4 [FILL-IN]; 52.219-1 [FILL-IN]; 52.222-18 [FILL-IN]; 52.222-25 [FILL-IN]; 252.225-7000 [FILL-IN]; 252.22! 5-7036 [FILL-IN]. The Contractor shall include, as a minimum, the following information on each invoice: (1) Name and address of the Contractor; (2) Invoice number and date and shall be marked ?Original Invoice?; (3) Contract number, contract line item number and, if applicable, the order number; (4) Description, quantity, unit of measure, unit price and extended price of the items delivered or services performed and an invoice total; (5) Shipping number and date of shipment including the bill of lading number and weight of shipment if shipped on Government bill of lading; (6) Terms of any prompt payment discount offered; (7) Name and address of official to whom payment is to be sent; and (8) Name, title, and phone number of person to be notified in event of defective invoice. Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) Circular A 125, Prompt Payment. Contractors are encouraged to assign an! identification number to each invoice. MAIL INVOICES TO: Vendor Pay, Code 00M, Bldg 3173, NSWC CRANE, 300 Highway 361, Crane IN 47522-5002. PAYMENT STATUS INQUIRIES-Status of invoice payments can be obtained from the following web site: www.dfas.mil/money/vendor If the payment is being made by DFAS-Columbus use the MOCAS Vendor Pay Inquiry System (VPIS) site listed on the above web site. It is recommended that the vendor download the ?MOCAS VPIS Help Guide? and ?Reason and Remark Code Document?. You must then register by clicking on ?User Registration? under the subheading ?MOCAS Vendor Pay Inquiry System? before payment inquiries can be made. If payment is being made by other than DFAS-Columbus, status of invoice payment can be obtained through the Non-MOCAS System by cage code, contract number or DUNS number at the above listed web site. To determine which system to use see the following blocks of your contract document for payment offices designation: SF 26 Awa! rd/Contract-Blk 12; SF 33 Award/Contract-Blk 25; SF 1449 Solicitation/Contract/Order for Commercial Items-Blk 18a; DD1155 Order for Supplies or Services-Blk 15. ADDITIONAL MARKING INSTRUCTIONS-In addition to any other marking instructions in this order, it is essential that all packages be accompanied by packing slips (preferably a DD 250) and all packing slips be located on the outside of the box or container and that all packages, shipping papers, and invoices be marked with the following information to permit effective receipt processing and timely payment: 1) Order Number; 2) Contract Line Item Numbers. The invoice shall be clearly marked as ?original invoice? and all required information submitted to the address(es) listed herein. The foregoing requirements must be passed on to any organization entity originating a shipment as a deliverable under this order. Caution: Any packages and invoices received which are not marked in accordance with the above requirement! s may be refused and returned to the contractor at the contractor's expense. BUSINESS HOURS-NSWC Crane, allows flexible working hours for its employees. The normal eight hour shift may be worked between the hours of 6:30 AM and 5:30 PM EST. Many of our employees work 6:30 AM to 3:00 PM as a regular practice. The core time, when all employees are scheduled to work, is 9:00 AM to 3:00 PM. PREPARATION FOR DELIVERY (STANDARD COMMERCIAL) Standard commercial preservation, packaging and packing is authorized unless otherwise specified. TAX EXEMPTION-Section 39(a) and Section 6 of the Indiana gross income tax act of 1933, specifically exempts NSWC Crane, as a government activity from any payment of sales and use tax. EXEMPTION NUMBER 0018103400015 ASSIGNED. Please provide your Commercial and Government Entity (CAGE), Data Universal Numbering System (DUNS) number and Tzxpayer Identification Number (TIN). To be eligible for award you must be properly registered in the Governmen! t?s Central Contractor Registration (CCR). Offerors may obtain information on CCR registration and annual confirmation requirements by calling 1-888-227-2423, or via the Internet at www.ccr.gov. All changes to the requirement that occur prior to the closing date will be posted to Crane web site, FedBizOpps and NECO. It is the responsibility of interested vendors to monitor the Crane web site, FedBizOpps and/or NECO for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award. Offers may be faxed to Phyllis.Hoggatt, FAX 812-854-5066 or e-mailed to hoggatt_p@crane.navy.mil. All required information must be received on or before 26 August, 2004, 2:00 PM Eastern Standard Time. See Note 26. Our mission is to provide quality and responsive acquisition services for this Command. In an effort to continue to i! mprove our services, we are conducting a survey of our vendors. This survey may be found on the World Wide Web at the following address: http://www.crane.navy.mil/supply/VendorSurvey.htm. Your comments will help us determine if we are accomplishing this and show us ways to improve our processes. Please consider taking the time to complete the survey.
- Record
- SN00641786-W 20040813/040811212743 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |